Commercial VisionPRO™
8000
VisionPRO 8000 Features
• Commercial VisionPRO 8000
incorporates all the standard
features of the VisionPRO family:
- Sleek design
- Menu-driven programming
- Large touchscreen display
• But the Commercial VisionPRO
8000 goes even farther and is
tailored with features specifically
for commercial applications
OS Number
Applications
TB8220U1003
2H/2C Conventional
3H/2C Heat Pump
10511
2
Commercial VisionPRO 8000
The Commercial VisionPRO 8000 offers these
distinguishable commercial features:
• Enhanced energy savings
- Economizer output
- Holiday setback
• Commercialized control algorithm
- Better and more consistent control in commercial applications
• Multiple keypad lockout levels
• Configurable recovery ramps
• Occupied/unoccupied scheduling
• Title 24 energy/air quality compliance
10511
3
Nomenclature
Power
U = Universal (dual powered, system flexibility,
scheduling flexibility)
Line Designation
Specification Details
TB = Buildings Thermostat
TH = Homes Thermostat
TB 8 22 0 U 1 003
Family Designation
System Stages
Application
8 = VisionPRO touchscreen
7 = VisionPRO conventional
22 = 2 Heat / 2 Cool
0 = Standard
10511
4
Commercial VisionPRO
8000
Installation Procedures
Installation
• Steps to install Commercial VisionPRO 8000
- Mounting
- Wiring
- Powering Thermostat
- Set Calendar
- Installer Setup Menus
 Main Settings Menu
 Regional Settings Menu
 Advanced Settings Menu
- System Test(s)
10511
6
Installation - Wallplate Mount
• Mounts directly on wall
• 4” x 2” electrical box
• Coverplate available
10511
7
Application Wiring
• Choose
Conventional or Heat
Pump terminal labels
• Insert wires in
terminal block
• Jumper—factory
installed
10511
8
Wiring 1 Heat/1Cool Conventional
1 = Power Supply
2 = Factory Installed Jumper
3 = Optional Sensor
1 Heat/1 Cool single transformer.
10511
9
Wiring 2 Heat/2 Cool Conventional
1 = Power Supply
2 = Factory Installed Jumper
3 = Optional Sensor
2 Heat/2 Cool single transformer.
10511
10
Wiring 1 Heat/1 Cool Heat Pump
1 = Power Supply
2 = Factory Installed Jumper
3 = Set to O or B in Setup
4 = Optional Sensor
1 Heat/1 Cool Heat Pump with NO Auxiliary Heat.
10511
11
Wiring 2 Heat/1 Cool Heat Pump
TOD/ECON
1 = Power Supply
2 = Factory Installed Jumper
3, 4 = Optional Sensor
5 = Must Wire Common
6 = Set to O or B in Setup
2 Heat/1 Cool Heat Pump with Auxiliary Heat.
12
10511
Powering Thermostat
• Hardwired
or
• Batteries (included)
- 3 AAA Alkaline batteries
10511
13
Mounting Thermostat on Wallplate
• Locks straight into
position
- Line up pins with the
terminals
- Push thermostat straight
onto the wallplate until it
snaps into place
10511
14
Activate Real Time Clock
• To activate the Real
Time Clock, simply pull
on Tab to remove
during installation
10511
15
Set Calendar
• Real Time Clock – Set
Calendar
- Set Year
- Set Month
- Set Day
10511
16
Set Time
Time
• Real Time Clock – Set
Time
- Adjusts automatically for
daylight savings time
- Maintains time and day
during power outage
• Press Done
Can turn Daylight Savings Time feature off in
Installer Setup
10511
17
Initiate Installer Setup
1. Press the SYSTEM key
2. PRESS and HOLD the
two unmarked keys as
shown until the display
changes
- Approximately 5 seconds
10511
18
Installer Setup Display
Setup
Number
• Setup Number on Left
- 4-digit number starting with 0
- Use the up arrow to advance
to the next installer setup
option
• Current Setting on Right
- 2-digit number
- Use the up and down arrows
to change the current setting
Commercial
• Exit Installer Setup
- Press the Done Key
Current
Setting
10511
19
Easy-to-Use Installer Setup Menus
1. Installer Setup is broken into 3 menus
- Main Settings menu—numbers 0120 to 0290
 Must Select the System Type
- Regional Settings menu—numbers 0300 to 0499
- Advanced Settings menu—numbers 0500 to 0710
2. Smart Installer Setup
- Setup numbers automatically change defaults based on
previous choices
- Setup number choices appear and disappear based on previous
choices
10511
20
Main Menu Installer Setup Menu Items
• Setting the Calendar
- Year, Month, Date
• Schedule Options
- 7 day
- Non-Programmable
• System Type
- 12 choices
• Fan Operation
• O/B terminal
• Continuous backlight
• Cycles per hour
- Compressor
- Heat (Emergency Heat)
• Recovery rates
- Heat (1-20°F/hour)
- Cool (1-20°F/hour)
• Additional Menus
- Go to Self Test
- Go to Regional Menu
- Go to both Regional and
Advanced Menus
10511
21
Main Setting Menu Items
Universal Application
• Up to 2 Heat/2 Cool
(plus Aux Heat)
- Forced Warm Air
 Single stage
 Multistage
- Heat Pumps
 Single stage
 Multistage
Commercial
10511
22
Main Setting Menu Items
Universal Scheduling
• Multiple Programming Options
- 7 Day
- 5-1-1
- 5-2
- 1 Day
- Non-programmable
• Select Schedule Periods
- OCC1, UNOCC1,
OCC2, UNOCC2
- OCC1, UNOCC2
Commercial
10511
23
Main Setting Menu Items
Backlighting
• On-Demand
- Whenever a key is pressed, the light will stay on for
approximately 8 seconds
• Continuously
- Must be hardwired with a
common and installer setup
set to continuous
Commercial
10511
24
Regional Settings Menu Item
• Auto or Manual Changeover
• Deadband
• Fahrenheit or Celsius
• Daylight Savings
• Remote Temperature Sensor
- Outdoor or Indoor Remote
• Compressor Lockout (Heat Pump Only)
• Auxiliary Lockout (Heat Pump Only)
10511
25
Regional Settings Menu Item
Changeover
• Auto Changeover
- Default position
• Manual Changeover
- Set in Regional Installer Setup menu
Commercial
10511
26
Regional Settings Menu Item
Outdoor Temperature Sensor
• C7089U
- 2-wire remote sensor
- Hook up to the S1 and S2 terminals at the thermostat
- 200 feet maximum
• View outside temperature on home screen or by
pressing the More key
• Used for Heat Pump System
Temperature Lockouts
10511
27
Regional Settings Menu Item
Remote Indoor Temperature Sensor
• T7770A (20K NTC) or C7189U (10K NTC)
- 2-wire remote sensor
- Selectable via ISU 340
• Sensors can be used as follows:
- One sensor
- Multiple sensors
10511
28
Installation
Series-Parallel Temperature Averaging Networks
Thermostat
S1
Thermostat
S1
S2
S2
T7770A
T7770A
T7770A
T7770A
T7770A
T7770A
T7770A
T7770A
T7770A
T7770A
T7770A
T7770A
T7770A
10511
29
Advanced Settings Menu Items
• Number of Periods
• Compressor Off Time
• Temperature Range Stops
- Heat and Cool
• 12 or 24 hour clock
• Extended Fan Operation
- Heat and Cool
• Keypad Lockout
- Partial 1, Partial 2, or full
• Temperature Control(s)
- Heat and cool recovery
• Display Offset
• Reset Defaults
- Installer setup and schedule
10511
30
Advanced Settings Recovery Ramps
• Recovery Ramps
- Recovery scheme ramps the setpoint towards the desired
setpoint
- Ramped setpoint helps eliminate overshoot with oversized
commercial equipment
10511
31
Commercial VisionPRO
8000
Recovery Operation
Conventional Recovery
Heating
70oF
Set Point
Temperature
Actual
Temperature
60oF
UNOCC
OCC
10511
33
Commercial Recovery Ramps
Heating
Actual
Temperature
70oF
Set Point
Temperature
Setpoint actually
ramps up at a
user-defined rate
during recovery
60oF
UNOCC
OCC
10511
34
Conventional Recovery
Cooling
85oF
Set Point
Temperature
Actual
Temperature
78oF
UNOCC
OCC
10511
35
Commercial Recovery Ramps
Cooling
85oF
Set Point
Temperature
Actual
Temperature
78oF
UNOCC
OCC
10511
36
Recovery
Advanced Settings Menu Items
• “Recovery” is shown to
alert occupant that the
system is in recovery
mode
- Note: The setpoint
displayed during recovery
is the final setpoint, not
the ramping setpoint
Commercial
10511
37
Installation
Advanced Settings Menu Items
Extended Fan Operation
• Heat
- Fan runs 90 seconds after
call for heat ends
- Available if thermostat
has control of fan
• Cool
- Fan runs 40 seconds after
call for cool ends
Commercial
10511
38
Installation
Installer System Test
• Test HVAC equipment
- Cool stages
- Fan
- Heat stages
• Overrides compressor
delay
Commercial
Part of Installer Setup.
10511
39
Installation
Installer System Tests
Test 1
- Turn cool stage(s) on and off
Test 2
- Turn fan on and off
Test 3
- Turn heat stage(s) on and off
Test 4
- Turn emergency heat on and
off (heat pump only)
Commercial
Press
Done
to Exit
Arrows Move
To Next Test
Test 8
- Turn TOD/Econ on and off
Arrows Turn
System On
or Off
10511
40
Commercial VisionPRO
8000
Scheduling Procedures
Scheduling Feature Review
• Default Schedule is Energy Star
• Menu Driven Program Scheduling
• Each day can be scheduled differently
• Ability to Select Multiple Days
• Armchair Programming
10511
42
Scheduling
Set the Schedule
• Press the Schedule Key
Commercial
10511
43
View Schedule
View Schedule
• The current schedule period
will flash to indicate which
period is being viewed
• Press the Day and Period
you wish to view
• Press Cancel or Done
to return to Home Screen
Commercial
10511
44
Edit Schedule
Edit the Schedule
• Press the EDIT key
• View mode
Commercial
10511
45
Schedule Day Selection
Pick Days to Schedule
• Press any number of
the seven days of
the week to edit
Commercial
10511
46
Schedule Day Display
OK to Pick Multiple Days
• Check marks appear
on the days chosen
Commercial
10511
47
Schedule OCC1 Selection
Press OCC1 Key
• OCC1 will begin to
flash, indicating it
is chosen
Commercial
10511
48
Scheduling
Set OCC1 Time
• Use arrows to set the
OCC1 time
Commercial
10511
49
Set Temperature
• Use arrows to set
the heat
temperature
• Use arrows to set
the cool
temperature
Commercial
10511
50
Scheduling
Press UNOCC1 Key
• UNOCC1 will begin to
flash indicating it is chosen
- Set Time
- Set Temperatures
• Press OCC2 and
UNOCC2 and Repeat
Commercial
10511
51
Scheduling
Press Done Key
• When finished setting
the times and temperatures
for the Days Selected,
press Done
Commercial
10511
52
Saving Schedule Changes
Saving Changes
• The Days scheduled
are shown
• Display shows
Confirmation that
the schedule
changes were made
Commercial
10511
53
Cancel Schedule Period
To Cancel a Scheduled Period
• From the edit screen, choose the period to cancel
• Press the key
CANCEL PERIOD
Commercial
Example: Cancel UNOCC1
10511
54
Cancel Schedule Period
Once the Scheduled Period is Canceled
• Time & Temperatures disappear
• The bar above the UNOCC1 period is removed
Commercial
55
Reinstate schedule period by pressing arrow keys
10511
to set time and temperature.
Scheduling
Fan Schedule
• Press Fan key while in the Edit mode
- Auto (default—fan runs with system
- On—fan runs continuously during the schedule period
Commercial
10511
56
Override Fan Schedule
Fan Schedule
• Override Fan Schedule
- Press the fan key to the desired setting
- Like a mechanical fan switch. The fan will stay in ON until
user manually changes fan setting back to Auto
Commercial
10511
57
Following Schedule Display
Following Schedule
• Home Screen
gives confirmation
that schedule is
being used
Commercial
10511
58
Schedule Overrides
Schedule Overrides
1. Holiday
- Holds temperature for
a designated number
of days
2. Override
- Holds temperature
until the time the user
sets (can be limited
via ISU 535)
Commercial
10511
59
Scheduling
Override
• Holds temperature
temporarily until the
next scheduled period
time
- Press Override key or Up
Commercial
and Down Arrows next to
temperature
- Next schedule period time
is shown—this is when
the temporary hold will
end
- Adjust end time by
pressing Up or Down
Arrows next to the time
10511
60
Scheduling
Holiday
• Hold temperature for a
designated number of
days
- Press Up and Down
Arrows to set the
temperature desired while
away
- Press Arrows to set the
number of Days
Commercial
Press Cancel or Sched key to cancel Holiday early
10511
61
Commercial VisionPRO
8000
Operation
Operation
Feature Review
• Precise Temperature Control
• System Status
• View Outside Temperature
• Clean Screen
• Low Battery
• Screen Locked
• Temperature Range Stops
• Compressor Protection
10511
63
Operation
• The human body can sense a 2º F temperature
change
• To keep occupants comfortable, the thermostat
must keep the temperature within +/- 1º F of the setpoint
72O F
71O F
Set
Point
70O F
Comfortable
Temperature
Control
69O F
68O F
10511
64
Operation
Thermostat qualities that lead to comfortable temperature
control
• Top quality components
• Innovative design
• Superior control algorithms (Digital Thermostats)
- Controlling to an ideal Cycle Rate using Proportional + Integral
Control
10511
65
Operation
• Proportional + Integral Control
- Proportional Error (P): The difference between the set-point
temperature and the room temperature
- Integral Error (I): The length of time the room temperature
has differed from the set-point temperature
10511
66
Operation
Proportional Error: The difference between the room
temperature and the setpoint temperature
70°
A
Setpoint
Temperature
Room
Temperature
68°
A = Proportional Error
10511
67
Operation
Integral Error: The length of time the room temperature
has differed from the setpoint temperature
Setpoint
Temperature
70°
Room
Temperature
68°
B
C
D
B + C + D = Integral Error
10511
68
Operation
P+I Control: The P+I error is the sum of the two errors.
The cycle rate used to maintain the set-point temperature
is calculated using the P+I Error
70°
68°
Setpoint
Temperature
A
Room
Temperature
B
C
D
B + C + D = Integral Error
10511
69
Operation
System Status Indication
• Cool On
- Thermostat calling for Cool
• Heat On
- Thermostat calling for Heat
- Aux shown when auxiliary
heat is called in Heat Pump
Systems
Aux
10511
70
Operation
View Outside Temperature
• Outside Temperature is
shown in lower right
hand corner of Home
screen
Commercial
10511
71
Operation
View Outside Temperature
• Press More key
- If thermostat is set to auto
changeover, press the More
key to view the outside
temperature
• Press Done or Cancel to
return to Home screen
Commercial
10511
72
Operation
Clean Screen
• Press Screen key
- Activates a 30-second timer
- Locks out the Touch screen
function
Commercial
10511
73
Operation
Clean Screen
• OK To Clean Screen
- During 30-second
countdown, the screen can
be cleaned
• Use damp cloth slightly
moistened with water or
household glass cleaner
Commercial
Never spray liquid directly on the thermostat
10511
74
Operation
Clean Screen
• Press Screen to restart
the 30-second timer
• Press Done to return to
the Home screen
Commercial
10511
75
Operation
Low Battery Indication
• Flashes on Home screen
for approximately 30 days
• Batteries are optional if a
24Vac common is used
Recommended: Replace batteries once a year.
10511
76
Operation
Screen Locked
Keypad Lockouts
• Partial Lockout 1
- Only Override, Holiday
and Temperature Up and
Down Arrows are
available
• Partial Lockout 2
- Only Override and
Holiday buttons are
available
Commercial
• Fully Locked
- All keys are locked and
non-functional
10511
77
Operation
Temperature Range Stops
• Heat Setting
- Set the highest Heat
temperature the user can
set
• Cool Setting
- Set the lowest Cool
temperature the user can
set
Commercial
10511
78
Operation
Compressor Protection
• “Wait” shows in the
screen for compressor
delay
10511
79
Operation
Heat Pump Operation
• System Indication
• LED
• Compressor Lockout
• Auxiliary Heat Lockout
10511
80
Operation
System LED
• LED Indication
- Requires 24 Vac Common
connection
- Operates off the “L” terminal
- Only visible through the
thermostat cover when lit
Commercial
10511
81
Operation
System LED
• L Terminal Input
- L terminal is wired to an
equipment monitor
- LED lights to signal a check
or fail signal from the system
- May occur in any system
mode
10511
82
Operation
Compressor Lockout
• Electric Auxiliary heat
- Must set outdoor
temperature sensor for
control
- Choose compressor
lockout temperature in
installer setup number
0350
 No lockout
COMPRESSOR ONLY
•Fan does energize
Compressor
Lockout
Temperature
35
AUXILIARY HEAT ONLY
•Fan does energize
 15, 20, 25, 30, 35, 40 or 450
F
10511
83
Operation
Auxiliary Heat Lockout
• Electric Auxiliary heat
- Must set outdoor
temperature sensor for
control
- Choose auxiliary lockout
temperature in installer
setup number 0360
 No lockout
COMPRESSOR ONLY
•Fan does energize
Auxiliary Heat
Lockout
Temperature
50
AUXILIARY HEAT ONLY
•Fan does energize
 40, 45, 50, 55 or 60 0F
10511
84
Operation
Compressor and Auxiliary
Heat Lockouts
• Electric Auxiliary heat
- Must set outdoor
temperature sensor for
control
- Choose compressor
lockout temperature
- Choose auxiliary
lockout temperature
5º F deadband between Compressor and Auxiliary
Heat Lockout Temperatures
10511
85
Operation
Dual Fuel Heat Pumps
• Thermostat controls
backup fossil fuel heat
- Outdoor temperature
sensor for control
- Choose Balance Point
lockout temperature in
installer setup number
0350
 No lockout
COMPRESSOR ONLY
•Fan does energize
Balance
Point
30
FOSSIL FUEL ONLY
•Fan does not energize
 15, 20, 25, 30, 35, 40 or 45
0F
Emergency Head mode: Balance Point
Temperature ignored
10511
86
Recovery
Heat Pump Systems
Room
Temperature
COMPRESSOR
RECOVERY
RAMP
AUXILIARY HEAT
RECOVERY RAMP
Wake
10511
87
Recovery
Heat Pump Systems
Mild Weather: 50oF
Compressor Setpoint
Aux. Heat Setpoint
Room Temperature
Wake
ON
Compressor:
OFF
ON
Auxiliary Heat:
OFF
10511
88
Recovery
Heat Pump Systems
Moderate Weather: 30oF
Compressor Setpoint
Aux. Heat Setpoint
Room Temperature
Wake
ON
Compressor:
OFF
ON
Auxiliary Heat:
OFF
10511
89
Recovery
Heat Pump Systems
Severe Weather: 0oF
Compressor Setpoint
Aux. Heat Setpoint
Room Temperature
Wake
ON
Compressor:
OFF
ON
Auxiliary Heat:
OFF
10511
90
www.honeywell.com