AFS 4.3.3 Software Training Course ——Marketing Dept Steps for Programmer Connection: 1. Install AFS4.3.3 2. Connect the hearing aids and PC via Hi-pro (or Digital Hearing Aid Programmer) 3. Input client information 4. Detect information of the hearing aid 5. Connect the hearing aid 6. Enter fitting interface 1. Install AST Fitting System Download AFS4.3.3 fitting software from our website or open the AFS4.3.3 fitting software from CD-ROM, click the icon , to implement and complete the AFS installation. Web: http://www.austar-hearing.net Install AST Fitting System Double-click this icon Install AST Fitting System Click “Next” Install AST Fitting System Click “Next” Install AST Fitting System If you have installed low version of fitting software, The Installation path of the 4.3.3 should be the same with the low version. So it can save and protect original clients’ information. Click “Next” Install AST Fitting System Click “Next” Install AST Fitting System Install AST Fitting System Click “Next” Install AST Fitting System Click “Install” Install AST Fitting System Install AST Fitting System Click “Finish” Install AST Fitting System 2. Connect the hearing aids Insert the programming cable into the corresponding left ear or right ear of the Hi-pro (or digital hearing aid programmer), and insert the flexible strip of programming cable into the hearing aid. The metal face of flexible strip and battery door illustrated should back-to-back the the as be 2. Connect the Hearing Aids To program BTE OE 、RIC To program the Custom-made Hearing Aids、Faceplate kits and InstantFit Hearing Aids To program BTE 3. Input Client Information If you have already recorded your patient’s information in this software, click to select the existing relevant patient from the box. You can also input name of the patient on corresponding column and click “Search”. The information such as number, name, gender, etc will show in the blank below. Then click “Select”, and you can enter the interface of client data. 3. Input Client Information If this is your first time to use this fitting software, or you need to make a record for a new patient, close the dialog box of “Find”, then you will see the following illustration for recording new client information on your screen. 3. Input Client Information Key in basic information and audiogram of the patient, and click “Save” button, then go “fitting”. 4. Detect information of the Hearing Aids Click “Detect” 5. Connect the Hearing Aids Click “ Connect ” in the tool menu, then the hearing aids will be connected. When Click “Connect”, the originally-stored data of the hearing aid will also be read 7. Enter fitting interface If you are fitting a new hearing aid, click “Autofit” in tool menu, then make further adjustment according to client’s response. If you are fitting an used hearing aid, stored data of the aid will be read when you click “Connect”. Then you can keep on fitting. Or you can click “Autofit” for re-fitting. Thank you !