Advanced Construction Technology By Professor Chris Gorse & Ian Dickinson – licensed under the Creative Commons Attribution – NonCommercial – Share Alike License http://creativecommons.org/licenses/by-nc-sa/2.5/ Foundations and framed construction Chris Gorse and Ian Dickinson These slides should be read in conjunction with Emmitt, S. and Gorse, C. (2010) Barry’s Advanced Construction of Buildings. Oxford, Blackwell Publishing Foundation under a portal frame Pad foundations Ground beams – carry the wall loads to the pad foundations b. Pad foundations – used under the point loads of the framed construction Pile and Raft Continuous reinforced concrete raft foundation Pile caps Ground beams carry the wall loads to the pile caps Edge beams may be used to increase stiffness and rigidity Raft foundation – thickening where point loads occur Clusters of pile foundations c. Pile foundations – transfers the load to lower more stable ground c. Raft foundations – spreads the load over greater surface area Discussion • Discuss the various situations where beam and pad, pile and beam and raft foundations would be used under a frame building. Consider the following in your discussion: – Ground condition – Size of building – Building loads