Bob Howard
10/22/2011

How many connectors do you need
◦ Max DC/Servo Motor Controllers is 4 so use 4

How long should the connectors be
◦ Between controllers can be short
◦ Use the first for the battery
◦ Use the Last for the Samantha



Make middle lengths
the same
Longer for Battery
Longer for Samantha
Stripping the ends is
easy but doing the
middle is not.
•Cut with knife
•Fold back
•Peal back
insulation with
long nose pliers
Place on connector
Finished connector
Crimp Connector
Warning!!!
DO NOT OVER CRIMP


When inserted
correctly it will snap in
place. Make sure it is
square with the metal
side down.
Use a small screw
driver to push it in
place.


The two parts will
slide and lock
together. Make sure
the are on the
correct side when
you do this.
The harness will be
opposite the straight
parts connected to
the controllers


Samantha cable is
smaller than other
cables
Take a piece of 12
gauge wire and wrap
Samantha 20 gauge
wire around it
before crimping



Battery cable is
larger than other
cables
Peal some of the
wire back on the
black wire to get a
snug fit
Red wire will work
with no adjustments