with For Continuous Operations, VMware and Oracle RAC © Copyright 2013 EMC Corporation. All rights reserved. 1 Why is VPLEX Unique? VPLEX enables users to: – Have the exact SAME information ▪ In two separate locations • Accessible at the SAME time from both locations © Copyright 2013 EMC Corporation. All rights reserved. 2 VPLEX & AccessAnywhereTM Enabled by Distributed Virtual Volumes • Provides shared storage, concurrently read and write accessible, with the same storage identifiers, across sites. • Supports all major EMC and Non-EMC FC storage platforms. • Supported by nearly all open systems application clustering technologies. • • Simplifies High Availability and Disaster Recovery design and operations. Enables 100% storage availability. © Copyright 2013 EMC Corporation. All rights reserved. LUN 1V Distributed Virtual Volume LUN 1P LUN 1P LUN 2P LUN 2P Datacenter A Active Failure Domain Datacenter B Active Failure Domain 3 VPLEX makes VNX Active/Active Increase Availability, Increase Capacity, Increase Performance Building Block Approach to Storage A P A P A P A P A A A A A A A Load balance across multiple VNX arrays to maximize utilization and performance. A OR A SP A SP B P A P SP A P A A SP B P A P A P SP A A P A P SP B With VPLEX, two VNX arrays can be configured to provide full online redundancy for each other within or across sites. Data remains available and online, even if a whole array fails. VNX5700 VNX5300 VNX5300 VNX frame-based licenses © Copyright 2013 EMC Corporation. All rights reserved. New Lower cost of entry, size for now and scale non-disruptively in the future. 4 VPLEX: Availability From The Ground Up 4 front-end 8 Gb/s FC ports per director Engine Director A Director B Front End Back End Front End Back End Host & Array Ports Host & Array Ports Core Core Core Core Core Core Core Core Core Core Core Core Core Core Core Core Distributed Cache Distributed Cache Inter-Cluster Intra-Cluster COM COM Inter-Cluster Intra-Cluster COM COM A B A B A B A B 4 back-end 8 Gb/s FC ports per director Dual quad core processors Large distributed cache maintains locality information, enabling fast cache read performance COM interfaces provide inter-director communication for scalable I/O processing and distributed deployment 2 directors per VPLEX Engine Up to 4 engines (8 directors) per VPLEX Cluster © Copyright 2013 EMC Corporation. All rights reserved. 5 VPLEX Witness plus Cross-Cluster Connect Site 1 Site 2 VPLEX • VPLEX Witness – Coordinates seamless failover – Enables longer distance for stretched server clusters – Provides zero RTO for storage changes or events WITNESS • Cross-cluster connect Site 3 Active Federated AccessAnywhere Active •No more than 5ms round trip latency between clusters •With Cross Connect latency must be no more than 1ms •Witness can have up to 1 second of latency © Copyright 2013 EMC Corporation. All rights reserved. – Ideal for shorter distances – Leverages multipathing software – Trade off of higher host availability and CPU cycles – Reduces server failovers 6 Introducing VPLEX into Your Environment Encapsulation Method Host Data-in-Place Migration Minimal Disruption VPLEX (No data copy) 1. Connect to VPLEX and mask volumes 2. Import volumes into VPLEX (1:1) 3. Unmask old path 4. Present volumes from VPLEX 5. Remount volumes Array © Copyright 2013 EMC Corporation. All rights reserved. 7 Introducing VPLEX into Your Environment Host Migration Method Host No Disruption VPLEX Array Use Host Based Tools : Storage vMotion or Volume Managers 1. Connect additional storage to VPLEX 2. Create volumes in VPLEX 3. Present volumes to the host 4. Use host copy tools to copy data from array to VPLEX volume Array © Copyright 2013 EMC Corporation. All rights reserved. 8 VPLEX for Migrations Limit Risk – Less complexity, fully reversible Save Money – Lower or eliminate services costs Faster Time to Value – Leverage new arrays in days Powerful TCO – All future tech refreshes are FREE! No Downtime – Non-disruptive process © Copyright 2013 EMC Corporation. All rights reserved. 9 Traditional VMware DR Active-Passive Solution Disaster Recovery Traditional Active – Passive Solution Manual intervention to initiate failover in the event of an outage HA SRM Dynamic job relocation (vMotion) only possible within the datacenter Site failure or major infrastructure outage results in application disruption Double the capacity, but only the I/O utilization of one array Additional, inaccessible servers required at DR site Certified © Copyright 2013 EMC Corporation. All rights reserved. Array Replication Active Failure Domain Passive Failure Domain 10 VNX with VPLEX for VMware– Active/Active Solution Continuous Availability, Next Generation DR, Load Balancing Active – Active Solution vMotion across datacenters for nondisruptive load balancing, maintenance, and workload re-location Automatic failover and restart between the sites using VMware HA - no manual intervention The loss of a storage array or requirement for planned downtime does not result in ANY application interruption VMware vMotion VMware HA VMware DRS VMware FT VPLEX Metro VMware DRS for full utilization of compute and storage resources across domains Certified © Copyright 2013 EMC Corporation. All rights reserved. Active Failure Domain Active Failure Domain 11 VNX with VPLEX + RecoverPoint for VMware Three Site (Synchronous and Asynchronous) Availability Enhanced Availability VMware vMotion VMware HA Combines shortand long-distance (1000s of km) VMware DRS VMware FT VMware SRM VPLEX Metro Leverages SRM for DR site EMC RecoverPoint RecoverPoint integration eliminates HW requirement Automatic Failover Active Failure Domain Automated Failover Active Failure Domain Passive Failure Domain Certified © Copyright 2013 EMC Corporation. All rights reserved. 12 VNX with VPLEX for Oracle RAC Extended Clusters for Continuous Application Availability Oracle RAC can now achieve dualsite continuous operation without complexity and ongoing management issues Zero RPO and Zero RTO over distance Full utilization of resources at both sites Simple management No customization – standard Oracle RAC implementation Full certification from Oracle Certified © Copyright 2013 EMC Corporation. All rights reserved. 13 What’s new with VPLEX 5.2 Extends VMware Integration: Support of hardware acceleration using VAAI Block Zero Virtual Volume Expansion: Expand local and distributed virtual volumes non-disruptively Larger and adjustable IO Block sizes: Increase VPLEX performance and network utilisation rates by increasing the IO Block sizes from 128KB up to 1MB Enhanced RecoverPoint Integration: Increases scale from 2K to 8K volumes via multiple RPA clusters © Copyright 2013 EMC Corporation. All rights reserved. VPLEX frame-based licensing with VNX: This new licensing option makes VPLEX easier to order with VNX arrays Free Migration License: Unlimited capacity, 180 day license for tech refresh SRM Suite VPLEX Report Pack: Delivers health reporting for the VPLEX directors: Frontend and Backend IOPS, bandwidth and status; Virtual Volume health; locality, read/write IOPS and status; storage volumes health; capacity planning and trending; performance metrics 14 VNX with VPLEX for Continuous Operations Improved Availability, Mobility And Accessibility VPLEX allows customers to never have planned or unplanned downtime again – all data is continuously available © Copyright 2013 EMC Corporation. All rights reserved. Increased availability Zero RTO and Zero RPO over distance Full utilization of resources at both sites Accelerated tech refresh Ride through component or VNX array failures Active-active data access Increase resource utilization 15 Autostandby Currently in PowerPath, if you do not want a path used, you can set it to standby Autostandby adds a trigger that causes a path to be put in autostandby mode – Behaves just like standby – User set standby always has precedence Use cases – Detect a flaky path – Detect groups of paths connected to local and remote array controllers in a federation (VPLEX Metro) © Copyright 2013 EMC Corporation. All rights reserved. 17