Mr. Les Corpus, Instructor, Bohemia Interactive Simulations
GameTech 2012 VBS2Fires 1
Middleware developed by SimCentric Technologies
Add surface fires to your VBS2 Scenario
Not a magic bomb!
Ballistics model
Terminal effects
Observer interacts with the scenario
GameTech 2012 VBS2Fires 2
GameTech 2012 VBS2Fires 3
GameTech 2012 VBS2Fires 4
GameTech 2012 VBS2Fires 5
Groups and Series
Targetlist worksheet
Simulate 60 mm mortars to MLRS ballistics
Can be integrated with AAR
GameTech 2012 VBS2Fires 6
GameTech 2012 VBS2Fires
Terrain
Distance > 5000
Click Advanced
Draw Distance >
3000
7
GameTech 2012 VBS2Fires
Disable Realistic Fatigue
8
Add an observer
Add guns
Configure a Gunline Object
Add Targets
Process Missions
GameTech 2012 VBS2Fires 9
1 Computer will run VBS2Fires (no VBS2)
1 Computer will run VBS2 (no Fires)
Connect together in the same scenario
GameTech 2012 VBS2Fires 11
cmd ipconfig
Connection-specific DNS Suffix :
Link-local IPv6 Address . . : fe80::7970:e0
IPv4 Address . . . . . . : 192.168.1.10
Subnet Mask . . . . . . : 255.255.255.0
Default Gateway . . . . . : 192.168.1.1
GameTech 2012 VBS2Fires 12
GameTech 2012 VBS2Fires
127.0.0.1
Navigate to this file
13
198.168.1.15
//127.0.0.1
192.168.1.10
Add the address of computer running Fires
192.168.1.15
GameTech 2012 VBS2Fires 14
Select firing unit…
GameTech 2012 VBS2Fires
Type of mission and/or type of target location
…click “Transmit”
15
GameTech 2012 VBS2Fires
Enter target grid…
…click “Transmit”
16
Use drop down menus…
GameTech 2012 VBS2Fires
…or enter text (must be words
VBS2Fires recognizes)
17
GameTech 2012 VBS2Fires
Make selections if needed click “Transmit”
18
GameTech 2012 VBS2Fires
Observer will make adjustments
Radio messages from
VBS2Fires will appear here
19
Enter adjustments
Left, Drop, and Down must be (-)…
GameTech 2012 VBS2Fires
…click “Transmit”
20
Record as target or end mission
GameTech 2012 VBS2Fires
…click “Transmit”
21
Requires scripting knowledge
Build your own GUI
Creates the correct text message
Sends message to VBS2 using the Fires plugin
Before we start, end all active missions!
GameTech 2012 VBS2Fires 22
GameTech 2012 VBS2Fires
Enter commands here and click “Execute Global”
23
GameTech 2012 VBS2Fires 24
Command syntax: fusionFunction [“VBS2FiresPlugin”,
];
Replace “text string” with message to VBS2Fires
“@ 20 THIS IS R2
”
“@ 20 THIS IS R2
”
“@ 20 THIS IS R2
”
GameTech 2012 VBS2Fires 25
GameTech 2012 VBS2Fires
Create custom
GUIs within VBS2 and communicate with VBS2Fires
26
GameTech 2012 VBS2Fires 27
GameTech 2012 VBS2Fires 28
GameTech 2012 VBS2Fires 29
General questions les.corpus@bisimulations.com
Sales enquires sales@simct.com
SimCentric Website www.simct.com
SimCentric Support support@simct.com
GameTech 2012 VBS2Fires 30