Chapter 2 Atoms, Ions, and Molecules: The Building Blocks of Matter Copyright © 2020 W. W. Norton & Company Electrons • J. J. Thomson (1897) • Beam from cathode ray tube was deflected toward positively charged plate. • Atoms contain negatively charged particles with constant mass-to-charge ratio. Millikan’s Oil Drop Experiment Robert Millikan (1909) • Determined the mass and charge of an electron with oil-drop experiment. e = −1.602 × 10−19 C me = 9.109 × 10−31 kg Thomson’s Plum-Pudding Model In this model, electrons are distributed throughout a diffuse, positively charged sphere. Radioactivity • Henri Becquerel (1896) found that pitchblende produced invisible radiation. • The work of Becquerel, Marie and Pierre Curie, and Ernest Rutherford showed that this radiation was due to several types of radioactivity. • Beta particles (β, high-energy electrons) • Alpha particles (α, 2+ charge, mass = He nucleus) Rutherford’s Gold Foil Experiment In this experiment, Rutherford and his students bombarded a thin gold foil with alpha particles to test Thomson’s model of an atom. Rutherford’s Results Expected results from “plum-pudding” model Actual results The Nuclear Atom • The new atomic model assumed that there was a tiny, positively charged nucleus that contained nearly all the mass of the atom. • Consists of two types of particles: • Proton: positively charged subatomic particle • Neutron: electronically neutral subatomic particle Subatomic particles • Masses of atoms and subatomic particles are expressed in unified atomic mass units (u). • Equal to 1/12 of the mass of a carbon atom (6 protons + 6 neutrons = 12 u) Isotopes: Experimental Evidence • When positively charged neon ions were passed through Aston’s modified cathode ray tube, two bright spots were observed. • There must have been Ne+ ions with two different masses. • Isotopes are atoms of an element containing the same numbers of protons but different numbers of neutrons. Symbols of Isotopes or Nuclides •X represents the one- or two-letter symbol for the element •Z represents the nuclear charge or atomic number •A represents the atomic mass of the nuclide Symbols of Isotopes: Example Most elements have two or more isotopes, atoms that have the same atomic number (Z) but different mass numbers (A). 10 protons 12 neutrons (22 – 10) 10 protons 10 neutrons (20 – 10) 12 Sample Exercise 2.1: Relating the Symbols of Nuclides to the Composition of Their Nuclei Sample Exercise 2.1: Relating the Symbols of Nuclides to the Composition of Their Nuclei Collect, Organize, and Analyze Sample Exercise 2.1: Relating the Symbols of Nuclides to the Composition of Their Nuclei Solve Sample Exercise 2.1: Relating the Symbols of Nuclides to the Composition of Their Nuclei Think About It Sample Exercise 2.1: Relating the Symbols of Nuclides to the Composition of Their Nuclei Summary Sample Exercise 2.2: Identifying Ionic Nuclides and Writing Their Isotopic Symbols Complete the table by determining the numbers of protons, neutrons, and electrons in each 134Cs+ and 131I– ion and by writing the AXQ symbols of ionic nuclides (c) and (d), where Q is the charge of each ion. Sample Exercise 2.2: Identifying Ionic Nuclides and Writing Their Isotopic Symbols Collect, Organize, and Analyze Complete the table by determining the numbers of protons, neutrons, and electrons in each 134Cs+ and 131I– ion and by writing the AXQ symbols of ionic nuclides (c) and (d), where Q is the charge of each ion. We need to connect the numbers of neutrons, protons, and electrons to the AXQ symbols for four single-atom ions. The number of protons in the nucleus of an atom or monatomic ion defines its atomic number, which in turn determines the identity of the element (X). The sum of the number of protons plus neutrons is the mass number (A), and the charge (Q) is the difference between the number of protons and the number of electrons. Sample Exercise 2.2: Identifying Ionic Nuclides and Writing Their Isotopic Symbols Solve Complete the table by determining the numbers of protons, neutrons, and electrons in each 134Cs+ and 131I– ion and by writing the AXQ symbols of ionic nuclides (c) and (d), where Q is the charge of each ion. a. b. c. d. Cs is the symbol of cesium, which has an atomic number of 55. Therefore, the nucleus of a 134Cs+ ion has 55 protons and 134 − 55 = 79 neutrons. The ion has a 1+ charge, which means it has one fewer electron than protons, or 54 electrons. I is the symbol of iodine, whose atomic number is 53. Therefore, the nucleus of a 131 − I ion has 53 protons and 131 − 53 = 78 neutrons. The charge on the ion is 1−, which means it has one more electron than protons, or 53 + 1 = 54 electrons. The ion has 55 protons, which makes it cesium (Cs). Its mass number (A) is 55 + 82 = 137, and its charge is 55 − 54 = 1+. The charge symbol of an ion with a single positive charge is simply +, so the symbol of the ion is 137Cs+. The ion has 94 protons, which makes it plutonium (Pu). Its mass number (A) is 94 + 145 = 239, and its charge is 94 − 90 = 4+. The symbol of the ion is 239Pu4+. Sample Exercise 2.2: Identifying Ionic Nuclides and Writing Their Isotopic Symbols Think About It Complete the table by determining the numbers of protons, neutrons, and electrons in each 134Cs+ and 131I– ion and by writing the AXQ symbols of ionic nuclides (c) and (d), where Q is the charge of each ion. The value of Q is the sum of the positive charges in the nucleus and the negative charges of the electrons surrounding the nucleus. If an atom or ion has more electrons than protons, Q has a negative value; if fewer electrons than protons are present, Q has a positive value; and when numbers of electrons and protons are equal, Q is zero and the particle is a neutral atom. Sample Exercise 2.2: Identifying Ionic Nuclides and Writing Their Isotopic Symbols Summary Collect, Organize, and Analyze: We need to connect the numbers of neutrons, protons, and electrons to the AXQ symbols for four single-atom ions. The number of protons in the nucleus of an atom or monatomic ion defines its atomic number, which in turn determines the identity of the element (X). The sum of the number of protons plus neutrons is the mass number (A), and the charge (Q) is the difference between the number of protons and the number of electrons. Solve: Symbol Protons Neutrons Electrons (a) 134 Cs+ 55 79 54 (b) 131 – I 53 78 54 (c) 137 Cs+ 55 82 54 (d) 239 Pu4+ 94 145 90 Think About It: The value of Q is the sum of the positive charges in the nucleus and the negative charges of the electrons surrounding the nucleus. If an atom or ion has more electrons than protons, Q has a negative value; if fewer electrons than protons are present, Q has a positive value; and when numbers of electrons and protons are equal, Q is zero and the particle is a neutral atom. Mendeleev’s Periodic Table • Elements were ordered by increasing atomic mass. • Arranged elements in columns based upon similar chemical and physical properties • Left spaces open for elements not yet discovered The Modern Periodic Table • Elements are arranged in order of increasing atomic number. • Elements in columns have similar chemical and physical properties. Categories of Elements • Metals • Shiny, solid, conductor (of heat and electricity) • Malleable and ductile • Exception: Mercury is liquid. • Nonmetals • Solids (brittle), liquids, and gases • Nonconductors • Metalloids • Shiny (like metals) but brittle (like nonmetals) • Semiconductors Periodic Trends in Charges of Monatomic Ions • Charges of the common ions vary across the groups in the periodic table. 26 Commonly Used Names of Groups Sample Exercise 2.3: Navigating the Periodic Table The following elements are the major components of Portland cement, used in construction to make concrete and mortar. Which elements are they? a. The group 13 element in the third row (period) b. The group 16 element with the smallest atomic number c. The third-row metalloid d. The fourth-row alkaline earth element Sample Exercise 2.3: Navigating the Periodic Table Collect, Organize, and Analyze The following elements are the major components of Portland cement, used in construction to make concrete and mortar. Which elements are they? a. The group 13 element in the third row (period) b. The group 16 element with the smallest atomic number c. The third-row metalloid d. The fourth-row alkaline earth element We are asked to identify elements from the locations of their symbols in the periodic table. In parts a, c, and d, we are given the row number; in b we are not given the row number directly, but we know that the element has the lowest atomic number of all the elements in its group. Information about group locations comes from the group number in a and b, the type of element in c, and the group name in d. Sample Exercise 2.3: Navigating the Periodic Table Solve The following elements are the major components of Portland cement, used in construction to make concrete and mortar. Which elements are they? a. The group 13 element in the third row (period) b. The group 16 element with the smallest atomic number c. The third-row metalloid d. The fourth-row alkaline earth element a. b. c. d. The cell address is group 13, row 3: Al, aluminum. The element at the top of group 16 is O, oxygen. The only metalloid in row 3 is in group 14: Si, silicon. All the alkaline earths, including the one in row 4, are in group 2: Ca, calcium. Sample Exercise 2.3: Navigating the Periodic Table Think About It The following elements are the major components of Portland cement, used in construction to make concrete and mortar. Which elements are they? a. The group 13 element in the third row (period) b. The group 16 element with the smallest atomic number c. The third-row metalloid d. The fourth-row alkaline earth element Each element has a unique location in the periodic table that is linked to both its atomic number and its chemical properties. Chemists usually describe element locations in terms of their group number or name (the column they’re in) and their row number. Sample Exercise 2.3: Navigating the Periodic Table Summary Collect, Organize, and Analyze: We are asked to identify elements from the locations of their symbols in the periodic table. In parts a, c, and d, we are given the row number; in b we are not given the row number directly, but we know that the element has the lowest atomic number of all the elements in its group. Information about group locations comes from the group number in a and b, the type of element in c, and the group name in d. Solve: a. The cell address is group 13, row 3: Al, aluminum. b. The element at the top of group 16 is O, oxygen. c. The only metalloid in row 3 is in group 14: Si, silicon. d. All the alkaline earths, including the one in row 4, are in group 2: Ca, calcium. Think About It: Each element has a unique location in the periodic table that is linked to both its atomic number and its chemical properties. Chemists usually describe element locations in terms of their group number or name (the column they’re in) and their row number. Average Atomic Mass • Neon has three natural isotopes: The average atomic mass is calculated by taking the weighted average of masses of all isotopes of an element. Calculating Average Atomic Mass mNe = (19.9924 u × 0.904838) + (20.9940 u × 0.002696) + (21.9914 u × 0.092465) mNe = 20.1799 u Sample Exercise 2.5: Calculating Natural Isotope Abundances Silver (Ag) has two stable isotopes: 107Ag, 106.90 u and 109Ag, 108.90 u. The average atomic mass of silver is 107.87 u. What is the natural abundance of each isotope? Sample Exercise 2.5: Calculating Natural Isotope Abundances Collect and Organize Silver (Ag) has two stable isotopes: 107Ag, 106.90 u and 109Ag, 108.90 u. The average atomic mass of silver is 107.87 u. What is the natural abundance of each isotope? We know the masses of both isotopes of silver and its average atomic mass. We are asked to calculate the natural abundance of each. Sample Exercise 2.5: Calculating Natural Isotope Abundances Analyze Silver (Ag) has two stable isotopes: 107Ag, 106.90 u and 109Ag, 108.90 u. The average atomic mass of silver is 107.87 u. What is the natural abundance of each isotope? Sample Exercise 2.5: Calculating Natural Isotope Abundances Solve Silver (Ag) has two stable isotopes: 107Ag, 106.90 u and 109Ag, 108.90 u. The average atomic mass of silver is 107.87 u. What is the natural abundance of each isotope? Therefore, the percent natural abundances are the following: 107 Ag: 0.5050 × 100 = 50.5% 109 Ag: 0.4950 × 100 = 49.5% Sample Exercise 2.5: Calculating Natural Isotope Abundances Think About It Silver (Ag) has two stable isotopes: 107Ag, 106.90 u and 109Ag, 108.90 u. The average atomic mass of silver is 107.87 u. What is the natural abundance of each isotope? We predicted that the natural abundances of 107Ag and 109Ag would be nearly equal, and the calculated abundances are consistent with our prediction. Note that this approach works only for elements that have two isotopes. Sample Exercise 2.5: Calculating Natural Isotope Abundances Summary Collect and Organize: We know the masses of both isotopes of silver and its average atomic mass. We are asked to calculate the natural abundance of each. Analyze: We can’t insert values directly into the first equation below because we do not know the coefficients a1 and a2. However, if we let x = a1 (the natural abundance of one of the isotopes expressed as a decimal), the natural abundance of the other isotope (a2) = 1 − x. Solve: The percent natural abundances are the following: 107 Ag: 0.5050 × 100 = 50.5% 109 Ag: 0.4950 × 100 = 49.5% Think About It: The natural abundances of 107Ag and 109Ag are nearly equal, which make sense given that the average mass (107.87 u) is approximately halfway between the exact masses of the two isotopes. Molecular Mass • The molecular mass is the sum of all the average atomic masses of the atoms that are chemically bonded together. For sulfur dioxide (SO2), Formula Mass The formula mass is used for ionic compounds. • The formula unit is used since there are no molecules present. For calcium chloride (CaCl2): The Mole • The mole is the SI unit for expressing quantities of substances. • 1 mole = 6.022 × 1023 particles (Avogadro’s constant) • A mole is the number of atoms in exactly 12 grams of carbon-12. Conversions Using Avogadro’s Constant • Avogadro’s constant can be used to convert between number of particles and the number of moles of a substance (or vice versa). Sample Exercise 2.6: Converting Number of Moles into Number of Particles The silicon used to make computer chips must be extremely pure. For example, it must contain less than 3 × 10−10 moles of phosphorus (a common impurity in silicon) per mole of silicon. What is that level of impurity expressed in atoms of phosphorus per mole of silicon? Sample Exercise 2.6: Converting Number of Moles into Number of Particles Collect and Organize The silicon used to make computer chips must be extremely pure. For example, it must contain less than 3 × 10−10 moles of phosphorus (a common impurity in silicon) per mole of silicon. What is that level of impurity expressed in atoms of phosphorus per mole of silicon? The problem states the maximum number of moles of phosphorus allowed per mole of silicon and asks us to calculate the equivalent number of atoms of phosphorus per mole of silicon. The Avogadro constant defines the number of atoms in one mole of an element: 6.022 × 1023. Sample Exercise 2.6: Converting Number of Moles into Number of Particles Analyze The silicon used to make computer chips must be extremely pure. For example, it must contain less than 3 × 10−10 moles of phosphorus (a common impurity in silicon) per mole of silicon. What is that level of impurity expressed in atoms of phosphorus per mole of silicon? We can convert a number of moles into an equivalent number of atoms by multiplying by the Avogadro constant because its denominator contains our initial unit (mol) and its numerator contains the units we seek (atoms). We can estimate the correct answer by rounding each starting value to the nearest power of 10 and combining exponents: 1024 × 10−10 = 1014. Sample Exercise 2.6: Converting Number of Moles into Number of Particles Solve The silicon used to make computer chips must be extremely pure. For example, it must contain less than 3 × 10−10 moles of phosphorus (a common impurity in silicon) per mole of silicon. What is that level of impurity expressed in atoms of phosphorus per mole of silicon? Sample Exercise 2.6: Converting Number of Moles into Number of Particles Think About It The silicon used to make computer chips must be extremely pure. For example, it must contain less than 3 × 10−10 moles of phosphorus (a common impurity in silicon) per mole of silicon. What is that level of impurity expressed in atoms of phosphorus per mole of silicon? The result reveals that even a very small number of moles of an impurity translates to a very large number of atoms. The exponent of our calculated value matches our estimate, so our answer is reasonable. Sample Exercise 2.6: Converting Number of Moles into Number of Particles Summary Collect and Organize: The problem states the maximum number of moles of phosphorus allowed per mole of silicon and asks us to calculate the equivalent number of atoms of phosphorus per mole of silicon. The Avogadro constant defines the number of atoms in one mole of an element: 6.022 × 1023. Analyze: We can convert a number of moles into an equivalent number of atoms by multiplying by the Avogadro constant because its denominator contains our initial unit (mol) and its numerator contains the units we seek (atoms). We can estimate the correct answer by rounding each starting value to the nearest power of 10 and combining exponents: 1024 × 10−10 = 1014. Solve: Think About It: The result reveals that even a very small number of moles of an impurity translates to a very large number of atoms. The exponent of our calculated value matches our estimate, so our answer is reasonable. Molar Mass • The molar mass is the mass (in grams) of one mole of a substance (atom, molecule, or formula unit). • It has the same numerical value as the mass in u. Conversions among Moles, Mass, and Particles Sample Exercise 2.10: Interconverting Grams, Moles, Molecules, and Formula Units The ionic compound calcium carbonate, CaCO3, is the active ingredient in a popular antacid tablet. a. How many moles of CaCO3 are in a tablet with a mass of 502 mg? b. How many formula units of CaCO3 are in that tablet? Sample Exercise 2.10: Interconverting Grams, Moles, Molecules, and Formula Units Collect and Organize The ionic compound calcium carbonate, CaCO3, is the active ingredient in a popular antacid tablet. a. How many moles of CaCO3 are in a tablet with a mass of 502 mg? b. How many formula units of CaCO3 are in that tablet? We are asked to convert a given mass of CaCO3 into the number of moles and formula units in that mass. The molar masses of the elements in CaCO3 are 40.078 g/mol of Ca, 12.011 g/mol of C, and 15.999 g/mol of O. The number of formula units in a mole of an ionic compound is equal to the Avogadro constant (6.022 × 1023). Sample Exercise 2.10: Interconverting Grams, Moles, Molecules, and Formula Units Analyze The ionic compound calcium carbonate, CaCO3, is the active ingredient in a popular antacid tablet. a. How many moles of CaCO3 are in a tablet with a mass of 502 mg? b. How many formula units of CaCO3 are in that tablet? To convert a mass of a compound in milligrams into an equivalent number of moles, we need to convert the mass from milligrams into grams and then divide by the molar mass. The molar mass of CaCO3 is the sum of the molar masses of Ca and C plus three times the molar mass of O. Multiplying the number of moles by the Avogadro constant will give us the number of formula units. To estimate our answers, let’s round the mass of the tablet to 500 mg, or 0.5 g, and approximate the molar mass of CaCO3 by using whole-number values for the molar masses of Ca, C, and O: (1 mol Ca × 40 g/mol) + (1 mol C × 12 g/mol) + (3 mol O × 16 g/mol) = 100 g/mol CaCO3 Therefore, the answer to part a should be about 0.5 g/100 g/mol = 0.005 mol, and the answer to part b should be about 0.005 mol × (6 × 1023 formula units/mol), or about 3 × 1021 formula units. Sample Exercise 2.10: Interconverting Grams, Moles, Molecules, and Formula Units Solve The ionic compound calcium carbonate, CaCO3, is the active ingredient in a popular antacid tablet. a. How many moles of CaCO3 are in a tablet with a mass of 502 mg? b. How many formula units of CaCO3 are in that tablet? Sample Exercise 2.10: Interconverting Grams, Moles, Molecules, and Formula Units Think About It The ionic compound calcium carbonate, CaCO3, is the active ingredient in a popular antacid tablet. a. How many moles of CaCO3 are in a tablet with a mass of 502 mg? b. How many formula units of CaCO3 are in that tablet? The calculated values agree well with our estimates. As expected, the number of formula units in a relatively small mass is so enormous that we have no practical way to “count them.” However, combining the concept of molar mass with the Avogadro constant allows us to calculate how many formula units are in a sample of known mass. Sample Exercise 2.10: Interconverting Grams, Moles, Molecules, and Formula Units Summary Mass Spectrometry Atoms are converted into ions (M+) and then separated based upon their mass-to-charge ratio. Mass Spectra The graphical display of the intensity versus m/z value is called a mass spectrum. Sample Exercise 2.11: Determining Molecular Mass by Mass Spectrometry The explosive compound TATP (triacetone triperoxide) is a major concern for law enforcement officials because it can be synthesized from readily available ingredients. Fortunately for airport security, TATP can be detected by its mass spectrum, shown below. a. What is the mass of the molecular-ion peak in Figure 2.23? b. Show that this mass is consistent with the formula of TATP: C9H18O6. Sample Exercise 2.11: Determining Molecular Mass by Mass Spectrometry Collect, Organize, and Analyze The explosive compound TATP (triacetone triperoxide) is a major concern for law enforcement officials because it can be synthesized from readily available ingredients. Fortunately for airport security, TATP can be detected by its mass spectrum, shown below. a. What is the mass of the molecular-ion peak in Figure 2.23? b. Show that this mass is consistent with the formula of TATP: C9H18O6. The peak with the highest mass in a mass spectrum is often the molecular-ion peak. Its mass is the molecular mass of the compound. Once we determine the molecular mass, we can compare it with the molecular mass derived from the chemical formula. To obtain a compound’s molecular mass, we need the average atomic masses of its elements: 1.0079 u/atom of H, 12.011 u/atom of C, and 15.999 u/atom of O. Sample Exercise 2.11: Determining Molecular Mass by Mass Spectrometry Solve The explosive compound TATP (triacetone triperoxide) is a major concern for law enforcement officials because it can be synthesized from readily available ingredients. Fortunately for airport security, TATP can be detected by its mass spectrum, shown below. a. What is the mass of the molecular-ion peak in Figure 2.23? b. Show that this mass is consistent with the formula of TATP: C9H18O6. a. b. The molecular-ion peak for TATP is observed at m/z = 222 u. If we assume that z = +1, the molecular mass of TATP is 222 u/molecule. To calculate the molecular mass of C9H18O6, we simply add the average atomic masses of the atoms in each of its molecules: 9 carbon atoms, 18 hydrogen atoms, and 6 oxygen atoms: Sample Exercise 2.11: Determining Molecular Mass by Mass Spectrometry Think About It The explosive compound TATP (triacetone triperoxide) is a major concern for law enforcement officials because it can be synthesized from readily available ingredients. Fortunately for airport security, TATP can be detected by its mass spectrum, shown below. a. What is the mass of the molecular-ion peak in Figure 2.23? b. Show that this mass is consistent with the formula of TATP: C9H18O6. Detection of the m/z ratio of a molecular ion in the mass spectrum that corresponds to the molecular mass of TATP is strong evidence of the presence of the compound. The fragmentation pattern of the sample should also match that of TATP when analyzed in a comparable mass spectrometer, confirming the presence of TATP in the sample. Sample Exercise 2.11: Determining Molecular Mass by Mass Spectrometry Summary Collect, Organize, and Analyze: The peak with the highest mass in a mass spectrum is often the molecular-ion peak. Its mass is the molecular mass of the compound. Once we determine the molecular mass, we can compare it with the molecular mass derived from the chemical formula. To obtain a compound’s molecular mass, we need the average atomic masses of its elements: 1.0079 u/atom of H, 12.011 u/atom of C, and 15.999 u/atom of O. Solve: a. The molecular-ion peak for TATP is observed at m/z = 222 u. If we assume that z = +1, the molecular mass of TATP is 222 u/molecule. b. Think About It: Detection of the m/z ratio of a molecular ion in the mass spectrum that corresponds to the molecular mass of TATP is strong evidence of the presence of the compound. The fragmentation pattern of the sample should also match that of TATP when analyzed in a comparable mass spectrometer, confirming the presence of TATP in the sample.
0
You can add this document to your study collection(s)
Sign in Available only to authorized usersYou can add this document to your saved list
Sign in Available only to authorized users(For complaints, use another form )