Strength of Materials IIB
MSMV202
2025 Sem 2 Term Test 01
date: 5th September 2025
total marks: 50 marks = 100%
QUESTION 1 – Bending: Flexure Theory
duration: 120 [mins]
[24]
Consider the beam section depicted on the right which is subjected
to an applied moment of 4 [kNm].
a) Determine the maximum tensile and compressive stress in
the beam.
b) Determine the resultant force the bending stresses produce on
the horizontal top flange plate AB.
c) Determine the resultant force the bending stresses produce on
the web CD.
Support all your answers with detailed sketches.
QUESTION 2 – Bending: Unsymmetrical Beams
[26]
A beam is made up of two L125x75x8 unequal leg
angle sections attached firmly back-to-back to
form a lintel beam which supports two courses of
a brick façade as shown in the diagram.
Find the orientation of the neutral axis and
calculate the maximum tensile stress &
maximum compressive stress in the beam if, at
the cross-section of maximum moment, an
effective moment of M = 3.5 [kNm] is applied at an
angle of θ = 30º.
Sketch the 3D normal stress distribution at this cross-section by tabulating all the resultant stress
values at each section vertex...clearly label all your data as well as the vertex points on a sketch.
Support all your answers with detailed sketches.
Strength of Materials IIB
MSMV202
2025 Sem 2 Term Test 01
date: 5th September 2025
total marks: 50 marks = 100%
duration: 120 [mins]