Phase diagrams – equilibrium- microstructural development
Microstructures
(central issue of material property)
1.How microstructure is developed (at what condition?)
(temperature and chemical composition)
2.How fast will the microstructure form at a given temperature
3. What temperature versus time history will result in an
optimal microstructure
Understanding above via phase diagrams
Phase rule is used to identify the number of microscopic
phases associated with a given state condition, a set of values
for temperature, pressure and other variables that describe
the nature of the materials.
What is a phase?
Chemically and structurally homogeneous portion
of the microstructure.
A single phase can be polycrystallines, but each crystal grain
differs only in crystalline orientation, not in
chemical composition (component).
Component: can be single element or compound
Two elements can also
form a singe phase
(Ni-Cu alloy) – solid solution
or two compounds form a single
Phase (MgO-NiO)
In addition to phase and component, degrees of freedom
is often used to describe material’s microstructure.
Degrees of freedom
e.g. a pure metal at melting point has no degree of freedom.
At this state (or condition) metal exists in two phases in
equilibrium (liquid and solid)
State variables: temperature, pressure and composition
Gibbs* phase rule
F=C-P+2
F: number of degrees of freedom
C: number of components
P: number of phase
2 = temperature + pressure
If pressure is set at 1 atm
F=C–P+1
Now we understand why a pure metal at melting point
has no degrees of freedom
For pure metal C = 1, P = 2 (liquid and solid)
F=1–2+1=0
For an alloy consisting of two elements (C = 2)
at melting point (P = 2, liquid and solid)
F=C–P+1=2–2+1=1
F = 1 means that alloy can be maintained at two
phases by controlling the temperature.
A phase diagram is any graphical representation
of the state variables associated with
microstructures through Gibbs phase rule.
two-phase region
A eutectic alloy is a mixture of two or more metals that solidifies at
a lower temperature than the melting points of the individual
components, resulting in unique properties and applications.
When a non-eutectic alloy freezes, one component of the alloy
crystallizes at one temperature and the other at a different
temperature. With a eutectic alloy, the mixture freezes as one
at a single temperature. A eutectic alloy therefore has a sharp
melting point, and a non-eutectic alloy exhibits a plastic
melting range.
Eutectic diagram with no solid solution
Eutectic diagram with limited solid solution
The lever rule
(mass balance)
Amount of component
in a single phase can be
Easily determined.
Amount of component
in two-phase region
needs to be
determined via
lever rule.
mL + mSS = 100…(1)
0.3mL + 0.8mSS
= 0.5(100g) = 50g..(2)
Two equations and
two unknowns
So mL = 60 g
mSS = 40 g
The lever rule
-
-
m
m+m =
m
m+m
=
-
-