TUTORIAL #5
1.
An underground cable has a cross section as shown below. Region 1 and 4 are
conductors. Region 2 is a polystyrene with relative permittivity εr = 2.7. While
region 3 is a paper with relative permittivity εr = 3.0. Calculate:
(a)
ρs on the conducting surfaces
(b)
ρsb on the surfaces of the dielectric media
(c)
ρvb in the dielectric media
(d)
Potential difference between the two conductors
(e)
Energy per unit length stored in the cable
(f)
Capacitance per unit length for this cable
#4
#3
#2
#1
a
d
b
c
Answer: C ' =
2.
2πε1ε 2
Fm-1
ε 2 ln(b / a) + ε 1 ln(c / b)
A boundary separates a free space and a dielectric medium. At a point near the
interface, the electric field intensity in the free space region is
E = Eo (4 xˆ + 2 yˆ + 5 zˆ )
while in the region of dielectric medium, the field is
E = 3Eo ( xˆ + zˆ )
where Eo is a constant. Determine the permittivity ε for this dielectric medium.
Answer: εr = 2
3.
The region 4x + 3y > 10 consists of a dielectric medium with permittivity ε1 =
1.9εo and the region 4x + 3y < 10 is a dielectric medium with permittivity ε2 =
4.0εo. The electric field in the medium with permittivity ε1 is given as
E = 2 xˆ − 7 yˆ + 5 zˆ
Vm -1
Find D and P in both media and ρsb at the interface.
Answer: E 2 = 3.092 xˆ − 6.181 yˆ + 5 zˆ Vm -1
ρ sb = −1.3658ε 0
4.
C / m2
Given a structure consists of 3 layers of dielectric materials in between two thin
conducting planes which have similar magnitude of surface charge density, ρs
Cm-2. This structure is place at z = 0 plane as shown in the figure below.
Assuming the thickness of the conducting planes are negligible, find
(a)
Electric field in each region of dielectric medium
(b)
Potential difference between z = 0 and z = 3L
(c)
Capacitance per unit area for this structure
z
conductor
3L
εr1
2L
εr2
L
conductor
εr3
0
y
Answer: C '' =
5.
εo
1
1
1
L
+
+
ε r1 ε r 2 ε r 3
Fm-2
Two parallel conductors with infinite length and each with radius a (m) is placed
in free space. The distance between the two conductors is d (m). Calculate the
capacitance per unit length for this structure.
2a
d
Answer: C/l=πε0/ln(d/a) Fm-1