Structures & Properties of
Ceramics
ME251 Materials Science and Eng II
Fall 2016
What to address in this lecture?
• What is Ceramic? √
• Ceramic Bonding, Structure and Types
• Imperfections in Ceramics
• Phase Diagrams
• Mechanical Properties
ป
ขู
What is Ceramic?
Alloy
•Mechanical
Properties
2metals
-
• At least combination of a non-metal
and a metal
_
OR two non-metallic elemental solids. One NMES and non-metallic
gaseous element
• Two metallic elements nor two non-metallic gaseous element
Atomic Bonding
• Defines structure and properties of materials
• Types of bonding:
– Ionic Seram!s
– Covalent Gasses
– Metallic
– Van der Waals
– Hydrogen
Primary bonding (strong)
Secondary bonding (weak)
Ceramics – (Ionic & Covalent bonding) large bond
energy, high melting point, high modulus, low
thermal expansion
Electrons and Bonding
• Bonding of adjacent atoms
• Transfer of electrons
– Ionic bonds
• Sharing of Electrons
– Metallic bonds
– Covalent bonds
• Secondary Mechanisms
– Hydrogen bonds
– Van der Waals
– Dipole interactions
Ionic Bonding
? ⑦
ㅱ
⑮and
so
• Occurs between + and - ions.
• Requires electron transfer.
• Large difference in electronegativity required.
• Example: NaCl
Na (metal)
unstable
Cl (nonmetal)
unstable
electron
Na (cation)
stable
+ Coulombic
Attraction
-
Cl (anion)
stable
Examples: Ionic Bonding
• Predominant bonding in Ceramics
NaCl
MgO
CaF 2
CsCl
Give up electrons
Acquire electrons
Adapted from Fig. 2.7, Callister 7e. (Fig. 2.7 is adapted from Linus Pauling, The Nature of the Chemical Bond, 3rd
edition, Copyright 1939 and 1940, 3rd edition. Copyright 1960 by Cornell University.
Elektron
paylaşıyo
Covalent Bonding
Cooperative sharing of valence electrons between two adjacent atoms
Very directional
Atoms want to have their valence shell filled
For s and p subshells, this means sharing 8 electrons
Hydrogen and the transition metals are exceptions
• Similar electronegativity share electrons
• Bonds determined by valence – s & p orbitals dominate bonding
• Example: CH4
C: has 4 valence e-,
needs 4 more
CH 4
H: has 1 valence e-,
needs 1 more
H
Electronegativities
are comparable.
H
shared electrons
from carbon atom
C
H
H
shared electrons
from hydrogen
atoms
Adapted from Fig. 2.10, Callister 7e.
Examples of Covalent Bonding
B4C
SiC
Adapted from Fig. 2.7, Callister & Rethwisch 8e. (Fig. 2.7 is adapted from Linus Pauling, The Nature of the Chemical
Bond, 3rd edition, Copyright 1939 and 1940, 3rd edition. Copyright 1960 by
Cornell University.)
Degree of Ionic Character
% ionic character100{1- exp[-0.25(X A X B )2 ]}
Factors that Determine Crystal Structure
1. Relative sizes of ions – Formation of stable structures:
--maximize the # of oppositely charged ion neighbors.
-
+
-
-
-
unstable
+
-
stable
2. Maintenance of
Charge Neutrality :
--Net charge in ceramic
should be zero.
--Reflected in chemical
formula:
CaF 2 :
-
+
Adapted from Fig. 12.1,
Callister & Rethwisch 8e.
-
stable
Ca 2+
cation
F-
+
anions
F-
A mXp
m, p values to achieve charge neutrality
Coordination # and Ionic Radii
r
• Coordination # increases with
cation
r anion
To form a stable structure, how many anions can
surround around a cation?
r cation
r anion
ZnS
(zinc blende)
< 0.155
Coord
#
2
linear
0.155 - 0.225
3
triangular
0.225 - 0.414
4
tetrahedral
0.414 - 0.732
6 octahedral
0.732 - 1.0
8
Adapted from Table 12.2,
Callister & Rethwisch 8e.
cubic
Adapted from Fig. 12.4,
Callister & Rethwisch 8e.
NaCl
(sodium
chloride)
Adapted from Fig. 12.2,
Callister & Rethwisch 8e.
CsCl
(cesium
chloride)
Adapted from Fig. 12.3,
Callister & Rethwisch 8e.
Rock Salt Structure (AX)
MgO and FeO
MgO and FeO also have the NaCl structure
O2-
rO = 0.140 nm
Mg2+
rMg = 0.072 nm
rMg/rO = 0.514
cations prefer octahedral sites
Adapted from Fig. 12.2,
Callister & Rethwisch 8e.
So each Mg2+ (or Fe2+) has 6 neighbor oxygen atoms
Cesium Chloride Structure (AX)
AX–Type Crystal Structures include NaCl, CsCl, and zinc blende
Cesium Chloride structure:
rCs 0.170
0.939
rCl 0.181
Since 0.732 < 0.939 < 1.0,
cubic sites preferred
+
Adapted from Fig. 12.3,
Callister & Rethwisch 8e.
So each Cs has 8 neighbor Cl
-
Zinc Blende Structure (AX)
AX2 Crystal Structures
Fluorite structure
• Calcium Fluorite (CaF2)
• Cations in cubic sites
• UO2, ThO2, ZrO2, CeO2
• Antifluorite structure –
positions of cations and
anions reversed
Adapted from Fig. 12.5,
Callister & Rethwisch 8e.
ABX3 Crystal Structures
• Perovskite structure
Ex: complex oxide
BaTiO3
Adapted from Fig. 12.6,
Callister & Rethwisch 8e.
Density Computations for Ceramics
Number of formula units/unit cell
n(AC AA )
VCNA
Avogadro’s number
Volume of unit cell
AC = sum of atomic weights of all cations in formula unit
AA= sum of atomic weights of all anions in formula unit
Silicate Ceramics
Most common elements on earth are Si & O
Si4+
O2Adapted from Figs.
12.9-10, Callister &
Rethwisch 8e
crystobalite
• SiO2 (silica) polymorphic forms are quartz, crystobalite, &
tridymite
• The strong Si-O bonds lead to a high melting temperature
(1710ºC) for this material
20
Silicates
Bonding of adjacent SiO44- accomplished by the sharing of
common corners, edges, or faces
Mg2SiO4
Ca2MgSi2O7
Adapted from Fig.
12.12, Callister &
Rethwisch 8e.
Presence of cations such as Ca2+, Mg2+, & Al3+
1. maintain charge neutrality, and
2. ionically bond SiO44- to one another
21
Glass Structure
• Basic Unit:
4Si0 4 tetrahedron
Si 4+
O 2-
• Quartz is crystalline
SiO2:
Glass is noncrystalline (amorphous)
• Fused silica is SiO2 to which no
impurities have been added
• Other common glasses contain
impurity ions such as Na+, Ca2+,
Al3+, and B3+
Na +
They're
because
heavythe
Of
crystal
structure
Si 4+
O 2-
.
(soda glass)
Adapted from Fig. 12.11,
Callister & Rethwisch 8e.
22
Layered Silicates
• Layered silicates (e.g., clays, mica, talc)
– SiO4 tetrahedra connected
together to form 2-D plane
• A net negative charge is associated with
each (Si2O5)2- unit
• Negative charge balanced by
adjacent plane rich in positively charged
cations
Adapted from Fig.
12.13, Callister &
Rethwisch 8e.
23
Layered Silicates (cont.)
• Kaolinite clay alternates (Si2O5)2- layer with Al2(OH)42+ layer
Adapted from Fig. 12.14,
Callister & Rethwisch 8e.
Note: Adjacent sheets of this type are loosely bound to one
another by van der Waal’s forces.
24
Polymorphic Forms of Carbon
Diamond
– tetrahedral bonding of
carbon
• hardest material known
• very high thermal conductivity
– large single crystals – gem
stones
– small crystals – used to
grind/cut other materials
– diamond thin films
• hard surface coatings – used
for cutting tools, medical
devices, etc.
Adapted from Fig. 12.15,
Callister & Rethwisch 8e.
25
Polymorphic Forms of Carbon (cont)
Graphite
– layered structure – parallel hexagonal arrays of carbon
atoms
Adapted from Fig.
12.17, Callister &
Rethwisch 8e.
– weak van der Waal’s forces between layers
– planes slide easily over one another -- good lubricant
26
Polymorphic Forms of Carbon (cont)
Fullerenes and Nanotubes
• Fullerenes – spherical cluster of 60 carbon atoms, C60
– Like a soccer ball
• Carbon nanotubes – sheet of graphite rolled into a tube
– Ends capped with fullerene hemispheres
Adapted from Figs. 12.18
& 12.19, Callister &
Rethwisch 8e.
27
Point Defects in Ceramics (i)
• Vacancies
-- vacancies exist in ceramics for both cations and anions
• Interstitials
-- interstitials exist for cations
-- interstitials are not normally observed for anions because anions
are large relative to the interstitial sites
Cation
Interstitial
Cation
Vacancy
then
never
Anion
Vacancy
Adapted from Fig. 12.20, Callister &
Rethwisch 8e. (Fig. 12.20 is from
W.G. Moffatt, G.W. Pearsall, and J.
Wulff, The Structure and Properties
of Materials, Vol. 1, Structure, John
Wiley and Sons, Inc., p. 78.)
28
Point Defects in Ceramics (ii)
• Frenkel Defect
-- a cation vacancy-cation interstitial pair.
• Shottky Defect
so
-- a paired set of cation and anion vacancies.
· @
Shottky
Defect:
¿
• Equilibrium concentration of defects
Adapted from Fig.12.21, Callister &
Rethwisch 8e. (Fig. 12.21 is from
W.G. Moffatt, G.W. Pearsall, and J.
Wulff, The Structure and Properties
of Materials, Vol. 1, Structure, John
Wiley and Sons, Inc., p. 78.)
Frenkel
Defect
eQD /k T
29
Imperfections in Ceramics
• Electroneutrality (charge balance) must be maintained
when impurities are present
+
Na
Cl
• Ex: NaCl
• Substitutional cation impurity
cation
vacancy
Ca 2+
、
Na +
Na +
without impurity
Ca 2+ impurity
• Substitutional anion impurity
O 2-
without impurity
Cl Cl O 2- impurity
'
ㄴ
、
Ca 2+
with impurity
an ion vacancy
with impurity
30
Ceramic Phase Diagrams
MgO-Al2O3 diagram: One
theeas!est
of
d!agram
prese
to
observe
&
Adapted from Fig.
12.25, Callister &
Rethwisch 8e.
31
Mechanical Properties
Ceramic materials are more brittle than metals.
Why is this so?
• Consider mechanism of deformation
– In crystalline, by dislocation motion
– In highly ionic solids, dislocation motion is
difficult
• few slip systems
• resistance to motion of ions of like charge
(e.g., anions) past one another
32
Mechanical Properties
•Very brittle in tension ( brittle fracture and limited energy
absorption)
•Limited load carrying capacity
•The strength of ceramic materials is strongly dependent on the
processing
•Ceramics are usually much stronger in compression than in
tension
•At room T, both crystalline and
amorphous ceramics fracture before
plastic deformation occurs
Ceramics don’t dent
Flexural Tests – Measurement of Elastic
Modulus
X
• Room T behavior is usually elastic, with brittle failure.
• 3-Point Bend Testing often used.
-- tensile tests are difficult for brittle materials.
cross section
d
b
rect.
F
L/2
L/2
Adapted from Fig. 12.32,
Callister & Rethwisch 8e.
R
d = midpoint
circ.
deflection
• Determine elastic modulus according to:
F
x
F
slope =
d
d
linear-elastic behavior
F L3
E
d 4bd3
(rect. cross section)
F L3
(circ. cross section)
E
4
d 12R
34
Flexural Tests – Measurement of Flexural
Strength
√
• 3-point bend test to measure room-T flexural strength.
cross section
d
b
rect.
L/2
F
L/2
Adapted from Fig. 12.32,
Callister & Rethwisch 8e.
R
d = midpoint
circ.
deflection
location of max tension
• Flexural strength:
3Ff L
sfs
(rect. cross section)
2
2bd
Ff L
sfs 3 (circ. cross section)
R
• Typical values:
sfs (MPa) E(GPa)
Si nitride
250-1000 304
Si carbide
100-820 345
Al oxide
275-700 393
glass (soda-lime) 69
69
Material
Data from Table 12.5, Callister & Rethwisch 8e.
35
SUMMARY
• Interatomic bonding in ceramics is ionic and/or covalent.
• Ceramic crystal structures are based on:
-- maintaining charge neutrality
-- cation-anion radii ratios.
• Imperfections
-- Atomic point: vacancy, interstitial (cation), Frenkel, Schottky
-- Impurities: substitutional, interstitial
-- Maintenance of charge neutrality
• Room-temperature mechanical behavior – flexural tests
-- linear-elastic; measurement of elastic modulus
-- brittle fracture; measurement of flexural modulus
36
Applications and Processing of
Ceramics
ME251 Materials Science and Eng II
Fall 2016
Classification of Ceramics
Ceramic Materials
Glasses
Clay Refractories
products
Abrasives Cements
Advanced
ceramics
-optical
-whiteware -bricks for -sandpaper -composites -engine
-composite -structural high T
-cutting
-structural
rotors
(furnaces) -polishing
reinforce
valves
-containers/
bearings
Adapted from Fig. 13.1 and discussion in
-sensors
household
Section 13.2-8, Callister & Rethwisch 8e.
38
Ceramics Applications
39
Ceramics Application: Die Blanks
• Die blanks:
-- Need wear resistant properties!
die
Ao
die
• Die surface:
-- 4 mm polycrystalline diamond
particles that are sintered onto a
cemented tungsten carbide
substrate.
-- polycrystalline diamond gives uniform
hardness in all directions to reduce
wear.
Ad
tensile
force
Adapted from Fig. 11.8(d),
Callister & Rethwisch 8e.
d"amond
↑
Courtesy Martin Deakins, GE
Superabrasives, Worthington,
OH. Used with permission.
40
Ceramics Application: Cutting Tools
• Tools:
-- for grinding glass, tungsten,
carbide, ceramics
-- for cutting Si wafers
-- for oil drilling
• Materials:
-- manufactured single crystal
or polycrystalline diamonds
in a metal or resin matrix.
-- polycrystalline diamonds
resharpen by microfracturing
along cleavage planes.
oil drill bits
blades
Single crystal
diamonds
polycrystalline
diamonds in a resin
matrix.
Photos courtesy Martin Deakins,
GE Superabrasives, Worthington,
OH. Used with permission.
41
Ceramics Application: Sensors
• Example: ZrO2 as an oxygen sensor
Ca 2+
• Principle: Increase diffusion rate of oxygen
to produce rapid response of sensor signal to
change in oxygen concentration
• Approach:
A substituting Ca2+ ion
removes a Zr 4+ ion and
an O2- ion.
Add Ca impurity to ZrO2:
-- increases O2- vacancies
-- increases O2- diffusion rate
• Operation:
-- voltage difference produced when
sensor
gas with an
reference
O2- ions diffuse from the external unknown, higher
gas at fixed
O2surface through the sensor to the oxygen content
oxygen content
diffusion
reference gas surface.
-- magnitude of voltage difference
partial pressure of oxygen at the
+
voltage
difference
produced!
external surface
42
Refractories
• Materials to be used at high temperatures (e.g., in
high temperature furnaces).
• Consider the Silica (SiO2) - Alumina (Al2O3) system.
• Silica refractories - silica rich - small additions of alumina
depress melting temperature (phase diagram):
2200
T(ºC)
2000
3Al2O3-2SiO2
Liquid
(L)
1800
mullite
alumina + L
mullite
+L
crystobalite
+L
1600
1400
0
mullite
+ crystobalite
20
alumina
+
mullite
40
60
80
100
Composition (wt% alumina)
Fig. 12.27, Callister &
Rethwisch 8e. (Fig. 12.27
adapted from F.J. Klug and
R.H. Doremus, J. Am. Cer.
Soc. 70(10), p. 758, 1987.)
43
Advanced Ceramics:
Materials for Automobile Engines
• Advantages:
– Operate at high
temperatures – high
efficiencies
– Low frictional losses
– Operate without a cooling
system
– Lower weights than current
engines
• Disadvantages:
– Ceramic materials are
brittle
– Difficult to remove internal
voids (that weaken
structures)
– Ceramic parts are difficult
to form and machine
• Potential candidate materials: Si3N4, SiC, & ZrO2
• Possible engine parts: engine block & piston coatings
44
Advanced Ceramics:
Materials for Ceramic Armor
Components:
-- Outer facing plates
-- Backing sheet
Properties/Materials:
-- Facing plates -- hard and brittle
— fracture high-velocity projectile
— Al2O3, B4C, SiC, TiB2
-- Backing sheets -- soft and ductile
— deform and absorb remaining energy
— aluminum, synthetic fiber laminates
45
Ceramic Fabrication Method
GLASS
FORMING
PARTICULATE CEMENTATION
FORMING
Sheet Glass Forming
• Sheet forming – continuous casting
– sheets are formed by floating the molten glass on a pool of molten tin
Adapted from Fig. 13.9,
Callister & Rethwisch 8e.
47
49
Anneal!ng
Furnace
50
Heat Treating Glass
• Annealing:
-- removes internal stresses caused by uneven cooling.
• Tempering:
-- puts surface of glass part into compression
-- suppresses growth of cracks from surface scratches.
-- sequence:
before cooling
initial cooling
hot
cooler
hot
cooler
büzüşeeat room temp. baskt
wr!t
L!ste
=-
-- Result: surface crack growth is suppressed.
compression
tension gar!l!u
compression
baskı
51
Tempered Glass
Laminated Glass (Extra)
Glass Forming Bottle
• Blowing of Glass Bottles:
Pressing
Gob
operation
Parison
mold
Compressed
air
Suspended
parison
Finishing
mold
Adapted from Fig. 13.8, Callister & Rethwisch 8e. (Fig. 13.8 is adapted from C.J.
Phillips, Glass: The Miracle Maker, Pittman Publishing Ltd., London.)
55
Glass Forming: Fiber
Molten
Glass
56 56
Glass Properties
• Specific volume (1/) vs Temperature (T):
• Crystalline materials:
Specific volume
Liquid
(disordered)
Supercooled
Liquid
• Glasses:
Glass
(amorphous solid)
Crystalline
(i.e., ordered)
Tg
-- crystallize at melting temp, Tm
-- have abrupt change in spec.
vol. at Tm
Tm
Adapted from Fig. 13.6,
Callister & Rethwisch 8e.
solid
T
-- do not crystallize
-- change in slope in spec. vol. curve at
glass transition temperature, Tg
-- transparent - no grain boundaries to
scatter light
57
Glass Properties: Viscosity
• Viscosity, h:
-- relates shear stress () and velocity gradient (dv/dy):
glass
dv
dy dv
dy
h
dv / dy
velocity gradient
h has units of (Pa-s)
58
Log Glass Viscosity vs. Temperature
• Viscosity decreases with T
• soda-lime glass: 70% SiO2
balance Na2O (soda) & CaO (lime)
• borosilicate (Pyrex):
13% B2O3, 3.5% Na2O, 2.5% Al2O3
• Vycor: 96% SiO2, 4% B2O3
Viscosity [Pa-s]
• fused silica: > 99.5 wt% SiO2
10 14
10 10
10 6
10 2
1
200
strain point
annealing point
Working range:
glass-forming carried out
Tmelt
600 1000 1400 1800 T(ºC)
Adapted from Fig. 13.7, Callister & Rethwisch
8e. (Fig. 13.7 is from E.B. Shand,
Engineering Glass, Modern Materials, Vol. 6,
Academic Press, New York, 1968, p. 262.)
59
Hydroplasticity of Clay
• Clay is inexpensive
• When water is added to clay
Shear
-- water molecules fit in between
layered sheets
-- reduces degree of van der Waals
bonding
-- when external forces applied – clay
particles free to move past one
another – becomes hydroplastic
• Structure of
Kaolinite Clay:
Adapted from Fig. 12.14, Callister &
Rethwisch 8e. (Fig. 12.14 is adapted from
W.E. Hauth, "Crystal Chemistry of
Ceramics", American Ceramic Society
Bulletin, Vol. 30 (4), 1951, p. 140.)
charge
neutral
weak van
der Waals
bonding
4+
charge
neutral
Si
3+
Al
OH
2O
Shear
60
Slip Casting
Slip casting:
• Mill (grind) and screen constituents: desired particle size
• Mix with water and other constituents to form slip
• Slip casting operation
• Dry and fire the cast piece
61
Slip Casting
62
Hydroplastic Forming
• Mill (grind) and screen constituents: desired particle size
• Extrude this mass (e.g., into a brick)
• Dry and fire the formed piece
63
Tape Casting
• Thin sheets of green ceramic cast as flexible tape
• Used for integrated circuits and capacitors
• Slip = suspended ceramic particles + organic liquid
(contains binders, plasticizers)
Fig. 13.18, Callister &
Rethwisch 8e.
64
Drying and Firing
• Drying: as water is removed - interparticle spacings decrease
– shrinkage .
Adapted from Fig.
13.13, Callister &
Rethwisch 8e. (Fig.
13.13 is from W.D.
Kingery, Introduction
to Ceramics, John
Wiley and Sons,
Inc., 1960.)
wet body
partially dry
completely dry
• Firing:
micrograph of porcelain
Drying too fast causes sample to warp or crack due to non-uniform shrinkage
Si02 particle
(quartz)
-- heat treatment between
glass formed
900-1400ºC
around
the particle
-- vitrification: liquid glass forms
from clay and flux – flows
between SiO2 particles. (Flux
70mm
from Fig. 13.14, Callister & Rethwisch 8e.
lowers melting temperature). Adapted
(Fig. 13.14 is courtesy H.G. Brinkies, Swinburne
University of Technology, Hawthorn Campus,
Hawthorn, Victoria, Australia.)
65
Pressureless Sintering
Sintering
Hot Press
Sintering
Sintering occurs during firing of a piece that has
been powder pressed
-- powder particles coalesce and reduction of pore size
Cementation
• Hardening of a paste – paste formed by mixing cement
material with water
• Formation of rigid structures having varied and complex
shapes
• Hardening process – hydration (complex chemical
reactions involving water and cement particles)
• Portland cement – production of:
-- mix clay and lime-bearing minerals
-- calcine (heat to 1400ºC)
-- grind into fine powder
68
Summary
• Categories of ceramics:
-- glasses
-- clay products
-- refractories
-- cements
-- advanced ceramics
• Ceramic Fabrication techniques:
-- glass forming (pressing, blowing, fiber drawing).
-- particulate forming (hydroplastic forming, slip casting,
powder pressing, tape casting)
-- cementation
• Heat treating procedures
-- glasses—annealing, tempering
-- particulate formed pieces—drying, firing (sintering)
69
0
You can add this document to your study collection(s)
Sign in Available only to authorized usersYou can add this document to your saved list
Sign in Available only to authorized users(For complaints, use another form )