University of Baghdad
College of engineering
Civil engineering department
Second year / Class B
“How calculus keeps bridges standing”
Made by :
Ruqaya Ayad , Narjis Haider , Jannah Ali , Hadeel Saddam
Introduction :
Calculus is a cornerstone of civil engineering, providing the tools needed to analyze
and solve complex problems related to structure, motion, and change.
In bridge engineering, calculus is used to calculate load distributions, bending
moments, and structural deflection. Ensuring safety, stability, and efficiency.
Understanding structures :
When designing any type of structure, a civil engineer must consider all types of loads
that impact the integrity of the structure.
Dead loads : Are the weights of structural members and permanently attached
objects.
Live Loads : They vary in magnitude and location, caused by temporarily placed
objects, moving vehicles, or natural forces, the primary live loads on bridge spans are
those due to traffic.
Highway Bridge Loads : The primary live loads on bridge spans are those due to traffic,
and the heaviest vehicle loading encountered is that caused by a series of trucks.
Impact Loads : Moving vehicles may bounce or sidesway as they move over a bridge,
and therefore they impart an impact to the deck.
Wind Loads : When structures block the flow of wind, the wind’s kinetic energy is
converted into potential energy of pressure , which causes a wind loading.
Earthquake Loads : Earthquakes produce loadings on a structure through its
interaction with the ground and its response characteristics .These loadings result
from the structure’s distortion caused by the ground’s motion and the lateral
resistance of the structure.
Understanding the different types of loads is the necessary first step , where their
precise magnitude and distribution are then used to calculate the resulting deflection
and structural deformation.
2
Deflection :
It's perfectly normal for any structure to
deflect in response to a load. Unless this
deflection is too large for the purpose of the
structure. Deflections can occur from various
sources, such as loads, temperature,
fabrication errors or settlements. It's not a
"fault" but an essential characteristic without
which no structure would be able to work. To
ensure integrity and stability, deflections must be limited to prevent cracking of brittle
materials like concrete. Additionally, severe vibrations or deflections can affect the
perceived safety for occupants.
Accurate determination of deflections at specific points is essential for analyzing
statically indeterminate structures.
This equation represents a nonlinear second-order differential equation and it forms
the basis for the deflection methods we just mentioned :
𝒅𝟐 𝒗
𝑴
𝒅𝒙𝟐
=
𝑬𝑰
𝒅𝒗 𝟐 𝟑𝟐
[𝟏+( ) ]
𝒅𝒙
Its solution, 𝑣 = 𝑓(𝑥) , gives the exact shape of the elastic curve, assuming that beam
deflections occur only due to bending.
In order to facilitate the solution of a greater number of problems, the equation will be
modified by making an important simplification. Since the slope of the elastic curve for
𝑑𝑣
most structures is very small, we will use small deflection theory and assume
≈ 0.
𝑑𝑥
Consequently, its square will be negligible compared to unity and therefore :
𝒅𝟐 𝒗
𝑴
=
𝒅𝒙𝟐
𝑬𝑰
This is the fundamental differential equation for the Elastic Curve of a Beam, which is
essential in structural engineering for calculating how a beam bends, or deflects,
under a load.
3
Stress and strain :
Stress tells us how hard (with how much force) the atoms at any given point are being
pulled apart, and strain tells us how far they are being pulled apart (by what proportion
the bonds between the atoms are stretched)
Calculating stress and strain is crucial when it comes to bridges because it prevents
failure and shows how materials respond to load. it helps ensure safety, predict
deformation and identify weak points.
Calculating stress and strain : Elastic materials have a uniform cross section (area
A), the normal stress (σ) is
𝑃
𝐴
and it's constant along their length. The strain (ε) is the
ratio of total deformation (𝛿) to the length (L) and is also consistent. However, in a
bending beam that has a variable cross-sectional area, normal stress varies. To define
stress at a point the equation becomes :
𝝈=
𝒅𝑷
𝒅𝑨
And to define strain at a point, consider a small undeformed length (Δx) and the
deformation (𝛿) of that element under load, the normal strain will be:
∆𝜹 𝒅𝜹
=
∆𝒙→𝟎 ∆𝒙
𝒅𝒙
𝝐 = 𝐥𝐢𝐦
One of the applications of Calculus in the stress analysis of bridges is
Suspension bridges :
The main elements composing a suspension bridge are four towers, a rectangular
deck, two sustaining cables and some hangers.
The hangers link the deck to the main cables, obtaining a structural configuration
optimal to bear the weight of decks having long span. The most common suspension
bridges have two minor side spans and a central main span.
One of the most significant applications of calculus in suspension bridges is
determining the curve of the bridge's main cables.
4
A "free-hanging" chain or cable naturally forms a curve called a catenary, defined by
𝑥
the hyperbolic cosine function: 𝑦 = 𝑎 cosh
𝑎
The Parabola However, when a cable supports a uniform horizontal load (like the
massive weight of a bridge deck), the curve changes. Using integration, engineers prove
that the shape becomes a parabola.
To find the shape, we look at a small segment of the cable. We balance the horizontal
tension (Tx ), the vertical tension (Ty ), and the weight of the segment. The relationship is
expressed as:
𝑑𝑦 𝑤𝑥
=
𝑑𝑥
𝑇𝑥
By integrating both sides with respect to x , we derive the parabolic equation:
𝑤 2
𝑦=
𝑥 +𝐶
2𝑇𝑥
5
The exact length of the cable needed also needs to be calculated. Because the cable
isn't a straight line, we use the Arc Length Formula:
𝑑𝑦 2
𝑆 = ∫ √1 + ( ) 𝑑𝑥
𝑑𝑥
𝑎
𝑏
This integral tells engineers exactly how much steel cable is required to span the
distance between two towers while accounting for the "sag" in the middle.
An example for the importance of correctly analyzing stresses on suspension bridges is
the 1940 Tacoma Narrows Bridge .
It’s one of history's most significant
engineering failures. Located in Washington
State, it was the third-longest suspension
bridge in the world when it opened in 1940,
only to collapse dramatically four months
later.
the collapse was trigged by violent winds
causing the bridge to vibrate, and the
vibrations grew until the bridge tore apart.
One of the reasons for the collapse is that
engineers underestimated wind-induced
dynamic stress and focused on static loads.
The Tacoma narrows bridge before collapsing
This failure highlights the necessity of
comprehensive stress analysis for bridges
to ensure their structural integrity and
safety.
Calculating dynamic loads :
The movement of a bridge deck can be
modeled as a damped harmonic
oscillator (basically a vibrating system
that eventually slows down and stops).
The vertical displacement 𝑣(𝑡) of the deck
The Tacoma narrows bridge after collapsing
6
over time is described by a second-order linear differential equation:
𝑑2𝑣
𝑑𝑣
𝑚 2 +𝑐
+ 𝑘𝑣 = 𝐹(𝑡)
𝑑𝑡
𝑑𝑡
Where :
𝒎
𝒅𝟐 𝒗
𝒅𝒕𝟐
∶ Inertia Force based on the second derivative of position (acceleration).
𝒅𝒗
𝒄
∶ Damping Force based on the first derivative (velocity), it represents the energy
𝒅𝒕
lost to friction or internal resistance.
𝒌𝒗 : Restoring Force, the stiffness of the bridge material.
𝑭(𝒕) ∶ External Force, periodic forces like wind gusts or traffic
We also need to calculate the natural frequency 𝑤(𝑛) of the bridge. If the external force
𝐹(𝑡) has a frequency that matches 𝑤(𝑛) the amplitude of the vibrations increases
exponentially. This is the mathematical explanation for why the Tacoma Narrows
Bridge vibrations "grew until the bridge tore apart.
Modern civil engineering software also uses calculus to divide the bridge into
thousands of tiny "finite elements". The software solves a system of differential
𝒅𝑷
equations for every single element to ensure the stress 𝝈 =
remains within safe
𝒅𝑨
limits across the entire structure.
Conclusion :
Calculus is the essential language that allows civil engineers to translate physical
forces into safe structural designs. From the parabolic curves of the main cables to the
complex differential equations governing deflection and vibration, these mathematical
tools ensure that massive spans like the Golden Gate or modern bridges in Iraq can
withstand the test of time, wind, and weight
7
References :
1. R.C Hibbeler. “Structural analysis”
2. J.E Gordon. “Structures or why things don't fall”
3. Beer, Johnston, DeWolf and Mazurek. “Mechanics of materials”
4. Billah, K. and Scanlan, R. "Resonance, Tacoma Narrows Bridge Failure, and
Undergraduate Physics Textbooks," American Journal of Physics 59
5. Falocchi, A. (2019). PhD Thesis, Politecnico di Milano
6. Clough, R.W. and Penzien, J. "Dynamics of Structures."
8