Page 1 of 2
Term Project
Situation:
During winter, snowstorms in Montreal can change the road conditions in a matter of minutes. The roads
become slippery as the coefficient of friction of the road changes with temperature, snow, and ice conditions.
It is desirable to analyze the problem to help road users understand the physics of the phenomenon. To
achieve your goal, you need to apply the correct kinematic techniques and use suitable equations to relate
displacement, velocity, acceleration, and time. In addition, you are required to select the most
suitable kinetic technique for the defined situation.
https://www.youtube.com/watch?v=0BhhsEuYXZQ
Problem Description:
Bus drivers often need to drive up or down a hill in Montreal. Some of these buses are rear-wheel driven
(motor torque only transfers to rear wheel; front wheel spins freely). Your job is to describe the forces
involved in a bus travelling up or down a 20º inclined hill.
The two conditions are:
1) Driving up the hill
Hint: assume that the bus is a rear-wheel drive, accordingly friction is only applied to the rear wheels
(i.e., the front wheels do not have friction).
2) Braking down the hill
Hint: brakes are applied to lock all wheels; accordingly, all wheels have friction.
For BOTH of the Two Conditions Above:
a) Draw the free body diagrams of the bus with its passengers.
b) Determine if/how the number of passengers (𝑛𝑛𝑝𝑝 ) on the bus affects whether the bus can move up or
down the hill in a controlled manner at constant velocity under the following road conditions:
• Dry road: 𝜇𝜇𝑠𝑠 = 0.7 𝑎𝑎𝑎𝑎𝑎𝑎 𝜇𝜇𝑘𝑘 = 0.6
• Wet road: 𝜇𝜇𝑠𝑠 = 0.55 𝑎𝑎𝑎𝑎𝑎𝑎 𝜇𝜇𝑘𝑘 = 0.4
• Icy road: 𝜇𝜇𝑠𝑠 = 0.15 𝑎𝑎𝑎𝑎𝑎𝑎 𝜇𝜇𝑘𝑘 = 0.1
• Hints:
i. You may need to find the proportional loading of each wheel
ii. Recall that friction is a reactive force where F =µsN is the maximum threshold for no slip
iii. A negative 𝑛𝑛𝑝𝑝 is not necessarily incorrect. Please think about what it means.
c) Describe in your own words what is the meaning of the numbers found, according to the situation
described above.
Page 2 of 2
Case Study Analysis:
• There is a total of 6 cases to analyze: 3 with driving up and 3 with braking down.
• Your case study needs to include the analysis of all the cases while the bus is going up and down,
in the three illustrated road conditions (dry, wet, and icy).
Bus Specification (2D):
• Length: 12.19 m and Height: 4.38 m (includes height of wheel)
• Mass: 11000 kg (mass uniformly distributed in the bus)
• Wheels: 2 m from front and back
People on Board:
• Driver: 1 person, 80 kg, located at 1 m from the front
• Passengers: 𝑛𝑛𝑝𝑝 persons, 60 kg per person, assume equivalent
point mass of all passengers is located at 3 meters from the back
of the bus.
• Height-wise, the center of mass of all persons is located in the
middle of the bus (i.e., h = 4.38/2 = 2.19 m from the ground).
Hibbeler Engineering Mechanics: Dynamics, Fourteenth Edition, Pearson, 2016
Project Submission:
• This project is an individual or a group submission.
• If you choose to do the project in a group, then your group can be made up of a maximum
of 2 students who must be from the same tutorial section.
• Due date:
The project needs to be submitted in person during the lecture and no later than
Thursday, April 9th, 2026.