Mono-atomic gas
Why vibrational motions is not considered ?
Find molar heat capacity at constant
volume for mono-atomic perfect gas
Why different substances have
different heat capacities?
Adiabatic Expansion of a perfect gas
The internal energy of a perfect gas is independent of its
volume and depends only on its temperature.
The standard enthalpy of formation, of a substance is the standard reaction enthalpy for the
formation of the compound from its elements in their reference states. The reference state of an
element is its most stable state at the specified temperature and 1 bar
● The standard enthalpies of formation of elements in their reference states are zero at all
temperatures
● Finding standard enthalpies of individuals ions is possible by defining
At all temperatures
Kelvin Statement
Is it towards minimum of total energy?
NO
For free expansion
Energy lost by system = Energy
gained by surroundings
Measure of the disorderness in the system
•More heat released – more
disorderness
•Heat at low temperature produces
more disorderness
•Surroundings is at constant pressure or
volume
• U and H are state functions
0
For isothermal expansion of ideal gas:
• Total entropy change = 0
• Reversible processes are non-spontaneous
Find 𝜟S for isothermal free
expansion.
100 J
-95 J
20 J
25 J
-75 J
5J
+75 J
For an isolated system dq = 0 Hence entropy increases for a spontaneous change
Coefficient of performance
For reversible process
Wide range of liquids have
~ 85 J/K/mole
Liquid 🡪 vapor : comparable change in volume: comparable change in microstates
At constant Pressure
reversible Isothermal
expansion
heating at constant
volume
W= No. of microstates
Individual entropies can be obtained by
measuring heat capacities from 0 to 369 K
For most molecules W=1 at T=0 and hence S=0.
When w is not equal to zero at T=0 we have a residual entropy
For N water molecules it is found that W=(3/2)N
This is because of different orientation of water molecules in crystal without change in
energy
The reaction is
spontaneous and vigorous.
Why?
When dealing with entropy we have to consider both system and surroundings
At constant volume
At constant presure
At constant volume
At constant Temperature
Condition for spontaneous change solely based on system properties
&
At constant temperature
From Clausius inequality and first law
A is total energy of system – energy stored as
energy of thermal motion.
&
At constant pressure and temperature
The maximum additional non-expansion work is given by dG
From H=U+pv
For reversible isothermal process
At constant pressure
and for a Closed system
At given temperature and pressure the
phase with less molar Gibbs free energy (or
chemical potential) is more stable. If the
chemical potential of both the phases is
same then we have a physical equilibrium.
Thermodynamics does not discuss about the
rate at which physical transition takes place
Diamond is a metastable phase of carbon
under standard conditions
At given pressure, the temperature at which vapour pressure is
equal to the external pressure is called boiling point
Standard boiling point is boiling point at standard pressure
Density of vapour pressure increases and that of liquid
decreases.
At critical temperature the density of vapour and liquid
becomes equal and we have a single phase. The
vapour pressure at this point is critical pressure.
Above the critical temperature, with
pressure, only the density of the
supercritical fluid increases
At melting point, liquid and solid phase
co-exists
At triple point all the three phases co-exist
It is unique for a pure substance.
Water has triple point at 0 0C and 611 Pa
Triple point and critical temperature
determine the lowest and highest
temperature at which a liquid state can
exist
For CO2 the triple point is above 1 atm
For a one component system or pure substance
Can we find precisely at which T and P, two phases co exist ?
Clapeyron equation is applicable to any phase equilibrium of pure substance
Enthalpy of fusion is in general positive (except for He-3)
Change in molar volume is in general small and positive (water
is an exception) and hence slope is positive in general
For water: molar volume change is negative (small)
Unusual behaviour of water
For water: molar volume change is negative (small) resulting in steep negative slope at ice-I
water phase boundary.
When ice-I melts to water, its open structure collapses and the liquid is denser than solid
•Enthalpy of vaporisation is +ve
•Molar volume change is +ve but large
•Hence slope is not as steep as in solid-liquid boundary
•Hence Boiling point is sensitive to pressure
Change of boiling point with P for a perfect gas
Describes how the vapor pressure
changes with temperature
assuming it an ideal behavour
Similar to Liquid-gas equilibrium except that enthalpy of
vaporisation is replaced by enthalpy of sublimation
Why it is called chemical potential?
We will soon see that μJ is the
ability of J to bring about a physical
or chemical change.
For perfect gases:
(at constant T)
pJ is the partial pressure relative to 1 bar
Higher the partial pressure of the gas, higher is its
chemical potential and hence more active
chemically
For pure substance: Molar Gibbs free energy is same for all phases in equilibrium.
For a substance (more than one component): Chemical potential of each component is
same through out the system in an equilibrium state.
Mixing of gasses is spontaneous. Why?
Before Mixing:
After Mixing:
Entropy of Mixing:
Enthalpy of Mixing:
Enthalpy of mixing is zero indicates that there is not interaction b/n the molecules and no
heat is given or taken from surroundings. Entropy change is surrounding is zero.
Entropy change is system is positive as mixed gas is more disordered
Raoult’s law is more reliable when both components have similar molecular shapes
All real mixtures show deviations from the Raoult’s law
Raoult’s law is called as limiting law as it is more reliable for dilute solutions.
Theoretical importance of the Raoult’s law: It is useful in defining the chemical potential of
the components of liquid mixture in terms of partial pressures.
When a liquid A in a mixture is in equilibrium with
its vapor at partial pressure pA
Chemical potential of A, in liquid mixture:
Here change in enthalpy is zero because average solvent-solvent, solute-solute and
solvent-solute interactions are all same .
Raoult’s law gives good description of vapor pressure of solvent in dilute solutions where
solvent A is almost pure.
What about vapor pressure of solute ?
Chemical potential of solute
Concentration is used instead of molefraction
For real solutions
When a mixture of reactants is given, Chemical thermodynamics predicts if the formation of
the products is spontaneous.
It gives us the composition of reactants and products at equilibrium (dynamic)
Thermodynamics does not talk about the rate at
which the reaction takes place.
Thermodynamics will give how the equilibrium
composition is modified by changing the
conditions
In industry or biological system , chemical
equilibrium is always avoided.
Simple isomerisation
(Approximate calculations)
For electrolyte solutions activity coefficients deviate much from 1 even for dilute solutions
At low pressures, we can assume as ideal gasses
Allowed to chemical equilibrium with
ammonia at constant volume
Activity coefficients must be evaluated at the equilibrium compositon
Each reactant and product
have their energy spacings
Boltzmann distribution is
irrespective of reactant and
product.
Let product have high
energy (endothermic)
When A and B have equal
spacing, Population of A is
more at equilibrium
When B spacing is less,
population of B is more at
equilibrium.
Because K depends on Standard Gibbs’s free energy which is
defined at 1 bar.
But equilibrium composition changes with pressure.
What happens if the reaction mixture is compressed.
What happens if pressured is increased by adding inert gas ?
K
Electrolyte is an electrically conducting solution and the ions are charge carriers
Resistance
units
Conductance
units
units
or
Strong electrolyte:
Slight decrease is due to retarding effect on the ions
on the motion of other ions
For Strong electrolytes
Limiting molar conductivities of anion and cation, respectively
If we approximate denominator be 1 then degree of dissociation is inversely
proportional to the square root of the concentration.
Electrolytic solutions show non-ideal behavior even at low concentrations
Reason:
Activity of solute
Consider a salt of one anion and one cation
Estimation of mean activity coefficient in dilute solutions
(strong electrolyte)
Time averaged spherical haze around the central ion have
more counter ions and have net charge equal and opposite of
the central ion.
That lowering of energy appears as
Is used
At higher ionic strength (or molality) extended law is in
better agreement with the experiment than the limiting law
An electrochemical cell consists of two electrodes (metalic
conductors) in contact with an electrolyte (ionic conductor)
When electrolyte in the two electrode compartments is
different, salt bridge (KCl in agar jelly) connects them
A galvanic cell (voltaic cell) produces electricity as a result of
spontaneous reaction
An electrolysis cell uses electrical energy to drive a
non-spontaneous reaction. (ex. Commercial production of F2)
Dry cells, mercury cells, Nickel –Cadmium cells uses
substances built into them at manufacture
For Fuel cells, the reagents (H2 and O2 or methane and O2) are
continuously supplied from outside
Redox reactions proceed via much complex mechanisms where
electrons are never free
Oxidation takes place at anode; Reduction takes place at cathode
Galvanic cell : cathode has higher electric potential
Potential difference between the electrodes
Electrical work is directly proportional to the cell potential
To apply this the cell reaction should be reversible and
composition reaction mixture
is defined at a fixed
Both these are achieved by measuring the cell potential (emf) when it is balanced by an
exactly opposing source of potential so that the composition is constant; no current flows
Electric work = charge transported × E
Moles of electrons transported
Application: Determination of pH of a solution
At equilibrium, no change in the chemical composition and hence no change in the E
At equilibrium
Galvanic cell is combination of two electrodes.
Can we find the contribution of each electrode to the emf of the cell ?
To make it possible we define the potential of one electrode is 0 and assign the value of
others based on it.
Standard conditions: hydrogen gas should be at 1 bar and pH should be 0
Of any other electrode is assigned the value by constructing a
cell in which SHE is the right hand electrode.
Example:
Cell Reaction:
SHE = 0
As reaction is at 1 bar
Mean activity coefficient of
ions of HCl of molality b in
our previous example
Assuming standard enthalpy and entropy weakly
depends on temperature
Glass electrode is sensitive to Hydrogen ion activity
and potential proportional to the pH
E is set to 0 when the solution has pH = 7
When dipped in solution the outer layer is modified
according to the activity of hydrogen ion
When dipped in solution the outer layer is modified
according to the activity of hydrogen ion
Charge modification of outer layer is transmitted to
inner layer Sodium and Li ions in the glass. This
results in the membrane potential
In the presence of external electric field, ions moves to the electrode with a speed called the
drift speed
Electric field accelerates the ion and frictional force drags it back and it reaches an average
speed
= viscosity
Ionic mobility increases with charge and decreases
with radius and viscosity
Reason: In the formula we have to use
hydrodynamic radius
Then Why proton has highest mobility
=
=
=
Limiting conductivity
In deriving this, the relaxation effect and electrophoretic effect are
considered
Agreement with the experiment is quite good fro the solutions of low
ionic strength