THE EFFECT OF THE BUILDING’S
DESIGN ON ENERGY
CONSUMPTION
How Design Choices Influence Energy Efficiency
PRESENTED BY :
RUQAYA AYAD
NARJIS HAIDER
HADEEL SADDAM
INTRODUCTION
Energy consumption in the building sector is about 40% of total energy
consumed globally. It is a critical factor influencing architectural and
engineering decisions. As buildings contribute significantly to global energy
use, engineers must consider energy efficiency in the design phase.
Integrating advanced technologies and sustainable practices minimizes
energy demand while ensuring occupant comfort. Strategies include using
energy-efficient materials, optimizing natural light, and incorporating
renewable energy sources. Smart building management systems enhance
energy performance through real-time monitoring and adjustments. Energyefficient design is essential as the world pursues a sustainable future.
THE ROLE OF BUILDING DESIGN IN ENERGY
CONSUMPTION
DESIGN ELEMENTS AFFECTING ENERGY
CONSUMPTION
1. Building Orientation and Layout:
It affects how the structure interacts with solar radiation and
geographical direction.
Orientation impacts:
Thermal load
Occupant comfort
Influences ventilation.
Affects energy consumption required for maintaining thermal
conditions.
Using south facing windows, overhangs, and shading devices
help control solar gain.
Optimizing window placement to maximize daylight
which Reduces reliance on artificial lighting.
References: Lechner, N. (2014). Heating, Cooling, Lighting.
Ashmawy, R.E. (2015), “Buildings orientation and it's
impact on the electricity consumption”
DESIGN ELEMENTS AFFECTING ENERGY
CONSUMPTION
2. Material selection and insulation:
The building envelope, including walls, roofs, and windows, plays a
crucial role in energy consumption. Well-insulated buildings retain
heat during winter and reduce heat gain during summer, lowering
heating and cooling requirements.
Proper insulation materials (spray foam, fiberglass, foam boards) improve
a building's energy efficiency by reducing thermal bridging and air leakage.
High thermal mass materials (concrete, brick, stone) help stabilize
indoor temperatures by absorbing and releasing heat slowly.
Opt for eco-friendly materials like recycled steel, reclaimed wood, or cellulose
insulation from recycled paper, which reduce environmental impact and can
improve energy efficiency.
Reference: Hens, H. (2012). Building Physics: Heat, Air and Moisture
Mazria, E. (1979). The Passive Solar Energy Book.
Typical heat losses and gains without insulation in a temperate climate
THE ROLE OF BUILDING DESIGN IN ENERGY
CONSUMPTION
3. Window placement and size:
A balanced window-to-wall ratio (typically 20-40%)
optimizes natural light without causing excessive heat
loss or gain. Too many windows can increase energy
demands for heating/cooling.
Strategically placed windows and skylights reduce the
need for artificial lighting, especially when combined
with reflective surfaces to distribute daylight deeper into
spaces.
THE ROLE OF BUILDING DESIGN IN ENERGY
CONSUMPTION
Use double or triple-glazed windows with lowemissivity (Low-E) coatings to reduce heat transfer,
improving insulation and reducing energy loss.
Incorporate overhangs, blinds, or exterior shading
devices to block unwanted summer heat while allowing
winter sunlight, reducing reliance on HVAC systems,
hence reducing energy consumption.
Reference: Baker, N., & Steemers, K. (2000). Energy and Environment in Architecture.
summer heat
reflected out
winter heat
reflected
back inside
UV light
reflected
visible light
passes through
Low E-Glass
THE ROLE OF BUILDING DESIGN IN ENERGY
CONSUMPTION
4. Natural Ventilation :
Natural ventilation is essential for energy conservation as It
optimizes building performance.
Its effectiveness varies based on local climate conditions,
hot and humid regions may benefit from hybrid solutions
(natural airflow combined with mechanical systems).
Strategic building orientation can maximize wind flow.
Natural ventilation reduces reliance on artificial cooling
methods, which leads to decreased energy consumption and
lower utility costs.
Embracing natural ventilation enhances indoor comfort, It contributes to a more
sustainable and energy-efficient built environment.
Reference : Awbi, H.B., 2013. Ventilation of Buildings.
THE ROLE OF BUILDING DESIGN IN ENERGY
CONSUMPTION
5. Smart Building Technologies :
Smart building technologies play a pivotal role in optimizing energy consumption by
integrating automation, real-time monitoring, and data analytics
Smart systems dynamically adjust HVAC, lighting, and other building operations based on
occupancy and environmental data, reducing energy waste and lowering operating costs
IoT-based lighting adapts to occupancy and daylight levels, cutting energy consumption
by up to 20%
LED technology, combined with smart dimming controls, further enhances efficiency.
Reference : (ASHRAE, 2019).
(Boyano, A., Hernandez, P., & Wolf, O., 2013. Energy Demand and Potential
Savings in European Office Lighting Systems.)
THE ROLE OF BUILDING DESIGN IN ENERGY
CONSUMPTION
6. Integration of renewable energy systems:
Integrating renewable energy systems into buildings and
infrastructure optimizes energy efficiency, reduces
reliance on fossil fuels, and enhances sustainability.
Renewable technologies like solar panels can be
seamlessly integrated into building roofs and
façades, making efficient use of available
surfaces.
renewable energy sources like Wind turbines and
geothermal heaters significantly lowers a building’s
dependency on external energy supplies, leading to
reduced utility bills and long-term cost savings.
Reference : (Ellabban, O., Abu-Rub, H., & Blaabjerg, F., 2014. Renewable
Energy Resources: Current Status and Future Prospects.)
A Net Zero Building (NZB) serves as a prime
example of the various energy-efficient
applications previously discussed. This type of
building is designed to produce an amount of
energy equivalent to its consumption over a
specified duration, typically one year. The
attainment of this equilibrium is facilitated
through the implementation of energy
efficiency measures and the generation of
renewable energy on-site. The primary
objectives of these buildings are to mitigate
greenhouse gas emissions and decrease
reliance on fossil fuels, thereby contributing to
a more sustainable built environment.