1.
a.
At α = 0.05, the test shows no significant chemical effect (p = 0.121).
However, block differences are significant, so blocking successfully accounted for
variation across bolts.
b.
the estimated means are the same as the sample means which satisfies RCB.
c.
There are no significant differences according to Tukey. Since the main test results did not
show a significant difference in mean tensile strength for the four chemicals, post hoc
analysis is not necessary.
D.
MSE=1.82
So, Error SD= sqrt(1.82)= 1.348
E.
14 bolts are required for at least 95% power.
2.
A.
It is not a RCB design because some blocks do not contain all three types of stimuli.
B.
C.
Auditory=570
Tactile=668
Visual 460
D.
The sample means differ from the LS means because the design is unbalanced. Some
stimuli appear more often in age groups with higher or lower average reaction times. LS
means adjust for these unequal representations, providing unbiased treatment
comparisons.
3.
All designs use the same total sample size (100), but power rises sharply with the number
of blocks. The design with 20 blocks of 5 is preferred because it yields the highest power
and better control of block variability.