Semiconductor Fundamentals
1
Properties of Silicon and Germanium at 300 K
Property
Energy gap (eV)
Electron mobility (m2 /V·s)
Hole mobility (m2 /V·s)
Intrinsic carrier density (m−3 )
Intrinsic resistivity (Ω·m)
Atomic density (m−3 )
2
Silicon (Si) Germanium (Ge)
1.1
0.7
0.135
0.39
0.048
0.19
16
1.5 × 10
2.4 × 1019
2300
0.46
2.3 × 1028
3.3 × 1028
Intrinsic Semiconductor
An intrinsic semiconductor is a pure semiconductor without any impurity atoms.
At a given temperature T :
Number of electrons = Number of holes
n = p = ni
where ni is the intrinsic carrier concentration.
3
Mass Action Law
Statement: Under thermal equilibrium, the product of free electron concentration and free
hole concentration is constant and equal to the square of the intrinsic carrier concentration.
np = n2i
4
Charge Transport in Semiconductors
• Metals are unipolar.
• Semiconductors are bipolar.
• When electric field E is applied:
1
– Electrons and holes move in opposite directions.
– Current flows in the same direction.
5
Drift Velocity and Mobility
Drift velocity is given by:
vd = µE
where:
• µn = electron mobility
• µp = hole mobility
µp < µn
6
Current Density
Current density is defined as:
J=
i
A
For electrons:
J = nqvd
Substituting vd = µE:
J = nqµE
7
Conductivity
Electrical conductivity is defined as:
σ = nqµ
Hence:
J = σE
For a semiconductor:
σ = q(nµn + pµp )
8
Intrinsic Conductivity
For intrinsic semiconductor:
n = p = ni
σi = qni (µn + µp )
2
9
Example: Intrinsic Conductivity of Germanium
Given:
µn = 0.38 m2 /V·s,
µp = 0.18 m2 /V·s
ni = 2.5 × 1019 m−3 ,
q = 1.6 × 10−19 C
σ = qni (µn + µp )
σ = (1.6 × 10−19 )(2.5 × 1019 )(0.38 + 0.18)
σ ≈ 2.24 Ω−1 m−1
10
Charge Neutrality Condition
A semiconductor is electrically neutral.
Total positive charge = Total negative charge
ND + p = NA + n
11
n-Type Semiconductor
For n-type material:
NA ≈ 0
From charge neutrality:
n ≈ ND
Using mass action law:
p=
n2i
ND
Electrons are majority carriers.
12
p-Type Semiconductor
For p-type material:
ND ≈ 0
From charge neutrality:
p ≈ NA
3
Using mass action law:
n2i
n=
NA
Holes are majority carriers.
13
Resistivity
Resistivity is defined as:
ρ=
14
1
σ
Doped Germanium Example
Donor impurity concentration:
1 atom per 108 Ge atoms
Atomic density of Ge:
NGe = 4.41 × 1022 cm−3
ND =
4.41 × 1022
= 4.41 × 1014 cm−3
108
For n-type:
n ≈ ND
p=
n2i
ND
σ = q(nµn + pµp )
ρ ≈ 3.7 Ω-cm
4