Cover Page
Standard: BACB10CK Rev: (R) 10-Dec-2012
WARNING - The Export Control or Intellectual Property language on this page takes precedence over any such
language that may appear on subsequent pages of this document.
EXPORT CONTROLLED - This technology or software is subject to the U.S. Export Administration Regulations
(EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for export, reexport, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per Supp.1 to Part 740 of
the EAR. ECCN EAR99
Boeing Proprietary, Distribution limited to Boeing employees and others covered by applicable proprietary information
or nondisclosure agreements.
Copyright © 1992, 1997-1998, 2002, 2005-2006, 2012 Boeing. All rights reserved.
Product Standards requirements are binding for all Boeing and non-Boeing production facilities and must be
implemented in accordance with the following: Part Standards: D-590-PREFACE, Material Specifications: BMS0PREF, Process Specifications: BAC001PREF, and Support Standards: BSS001PREF.
Any reproduction of this document or portions thereof must also reproduce this page of the document.
BOEING PROPRIETARY
EXPORT CONTROLLED ECCN EAR99
******* PSDS GENERATED *******
Boeing Proprietary
Basic Control
FOR STATUS OF INACTIVATION
SEE APPLICABILITY BLOCK
BCA
P
BDS
P
NEW DESIGN APPROVAL: P=PARTIAL, F=FULL, N=NONE
D
(
E)
B
(P)
W H
M
1
2X (L)
2X 45o
BREAK CORNER
2X .020 MAX
1
5o X .035
.015
DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994.
TOLERANCES: ± .010 UNLESS OTHERWISE SPECIFIED.
DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
DIMENSIONS APPLY AFTER FINISH UNLESS OTHERWISE SPECIFIED.
TABLE I
BOEING
STANDARD
NUMBER
BACB10CK
3
4
5
6
7
8
10
14
16
22
ØB
+.0000
-.0005
.1900
.2500
.3125
.3750
.4375
.5000
.6250
.8750
1.0000
1.3750
ØD
+.0000
-.0005 2
H
+.000
-.005
W
+.000
-.005
1.0000
1.0000
1.2500
1.4375
1.5000
1.6250
.344
.344
.375
.469
.625
.687
.315
.410
.625
.500
.500
.500
.558
.620
.812
.750
.375
.520
.812
.650
1.1250
2.0000
2.0000
2.7500
ØE
REF
.420
.420
.550
.660
.660
.810
.770
1.250
1.325
1.860
M
DEG 1
10.0
2.5
3.5
5.0
5.0
1.0
TECHNICAL CHANGES IDENTIFIED BY REVISION BAR.
DATE
02-SEP-1980
REV (R) 10-DEC-2012
BACB10CK
SH 1 OF 6
BEARING,
ROLLER, SINGLE ROW,
SELF-ALIGNING
BOEING PART STANDARD
Copyright © Boeing. All rights reserved. See Cover Page.
CAGE CODE 81205
BACB10CK
SH 1 OF 6
BOEING PROPRIETARY
EXPORT CONTROLLED ECCN EAR99
******* PSDS GENERATED *******
Boeing Proprietary
Basic Control
FOR STATUS OF INACTIVATION
SEE APPLICABILITY BLOCK
TABLE II
BOEING
STANDARD
NUMBER
BACB10CK
STATIC LIMIT
LOAD RATING
(LB)
RADIAL
THRUST
3000
300
3000
300
4210
420
6160
610
7900
790
11900
1190
3920
390
10000
1000
14900
1490
17900
1790
3
4
5
6
7
8
10
14
16
22
DYNAMIC
LOAD RATING (LB)
ØL
REF
P
REF
WEIGHT
(LB) REF
3
2650
2650
3490
5120
6550
9940
3260
8300
12300
14800
.060
.080
.060
.060
.047
.060
.060
.060
.080
.080
.060
.080
.080
.080
.07
.06
.12
.17
.30
.37
.06
.56
.48
.64
NOTES
1
FOR INSPECTION PURPOSES, THE BEARING SHALL BE CAPABLE OF A MISALIGNMENT
OF AT LEAST "M" DEGREES. FOR DESIGN PURPOSES, "M" SHALL BE CONSIDERED THE
MAXIMUM MISALIGNMENT CAPABILITY.
2
FOR THE BACB10CK22 ONLY, "D" TOLERANCE SHALL BE +.0000, -.0007.
3
DYNAMIC LOAD RATING IS BASED ON AN L-10 LIFE OF 4000 CYCLES OF 90 DEGREES.
4
BEARINGS PLATED WITH ZINC-NICKLE PER AMS2417 TYPE 2 GRADE A MAY BE
MANUFACTURED UNTIL 6/30/2013.
PROCUREMENT SPECIFICATION
BPS-B-80, EXCEPT AS NOTED.
MATERIAL
RINGS AND ROLLERS
SEALS
- 52100 STEEL PER AMS6440, EXCEPT VACUUM DEGASSED.
- POLYESTER ELASTOMER (HYTREL 6356) PLUS .5 PERCENT
CARBON BLACK.
POLYTETRAFLUOROETHYLENE (PTFE) PER AMS3652 OR PTFE
IMPREGNATED FIBERGLASS PER AMS3666; OR SEE CODING.
- 430 CRES PER AMS5503 OR 430 CRES PER ASTM A 240/240M.
SHIELDS
DATE
02-SEP-1980
REV (R) 10-DEC-2012
BACB10CK
SH 2
BEARING,
ROLLER, SINGLE ROW,
SELF-ALIGNING
BOEING PART STANDARD
Copyright © Boeing. All rights reserved. See Cover Page.
CAGE CODE 81205
BACB10CK
SH 2
BOEING PROPRIETARY
EXPORT CONTROLLED ECCN EAR99
******* PSDS GENERATED *******
Boeing Proprietary
Basic Control
FOR STATUS OF INACTIVATION
SEE APPLICABILITY BLOCK
HEAT TREATMENT
RINGS AND ROLLERS
- 60 HRC MINIMUM.
FINISH
SEE CODING.
PLATE EXPOSED SURFACES, EXCEPT BORE, SHIELDS, SEAL RETAINERS AND SEALS,
WITH ZINC-NICKEL PER BAC5637, TYPE II, .0003 - .0007 THICK; OR ZINC-NICKEL PER
AMS 2417, TYPE 2, GRADE B 4 EXCEPT PERIODIC TESTING FOR COMPOSITION,
ADHESION AND 96 HOUR ZINC CORROSION AND BASIS METAL CORROSION IN
ACCORDANCE WITH ASTM B 117 SHALL BE MONTHLY. THE 500 HOUR BASIS METAL
CORROSION TEST IN ACCORDANCE WITH ASTM B 117 IS ONLY REQUIRED FOR
PREPRODUCTION (QUALIFICATION) TESTING. HYDROGEN EMBRITTLEMENT TESTING IS
NOT REQUIRED.
PLATE EXPOSED SURFACES, EXCEPT BORE, SHIELDS, SEAL RETAINERS AND SEALS,
WITH CADMIUM PER AMS-QQ-P-416, TYPE I, CLASS 2, OR TYPE II, CLASS 2.
PLATING RUNOUT MAY OCCUR ON THE NON-EXPOSED SURFACES.
LUBRICATION
PREPACK A MINIMUM OF 80 PERCENT FULL WITH GREASE PER BMS3-33. TIME FROM DATE
OF LUBRICATION TO DELIVERY SHALL NOT EXCEED 36 MONTHS.
MARKING
IDENTIFICATION OF PRODUCT
PACKAGE MARKING
- PER BPS-B-80.
- PER BPS-B-80.
PACKAGING
PER BPS-B-80.
RADIAL INTERNAL CLEARANCE
.0006 - .0014, EXCEPT .0008 - .0016 FOR BACB10CK22.
PROCUREMENT
NMB, MINEBEA CO LTD, JAPAN (CAGE CODE S0352)
REXNORD CORP, BEARING DIV (CAGE CODE 77896)
DATE
02-SEP-1980
REV (R) 10-DEC-2012
BACB10CK
SH 3
BEARING,
ROLLER, SINGLE ROW,
SELF-ALIGNING
BOEING PART STANDARD
Copyright © Boeing. All rights reserved. See Cover Page.
CAGE CODE 81205
BACB10CK
SH 3
BOEING PROPRIETARY
EXPORT CONTROLLED ECCN EAR99
******* PSDS GENERATED *******
Boeing Proprietary
Basic Control
FOR STATUS OF INACTIVATION
SEE APPLICABILITY BLOCK
PROCUREMENT (CONTINUED)
THE MANUFACTURERS LISTED IN BPS-B-80SUP AND THEIR AUTHORIZED DISTRIBUTORS
ARE THE ONLY APPROVED SOURCES FOR THE ABOVE QUALIFIED PRODUCTS. SEE
BPS-B-80SUP FOR PLANT ADDRESSES. NO CHANGES IN PRODUCT DESIGN, BASIC
METHODS OF MANUFACTURE, PLANT SITE OR QUALITY LEVEL SHALL BE MADE WITHOUT
PRIOR NOTIFICATION AND PRIOR APPROVAL IN WRITING FROM THE BOEING COMPANY.
MANUFACTURERS OF COMPETITIVE PRODUCTS MAY APPLY TO A SUPPLIER
MANAGEMENT AND PROCUREMENT DEPARTMENT OF THE BOEING COMPANY FOR
QUALIFICATION. IF A MANUFACTURER IS SHOWN ON THIS STANDARD, BUT NOT LISTED
IN THE SUPPLEMENT, CONTACT THE DIVISIONAL ENGINEERING STANDARDS FOCAL
POINT OR ENGINEERING STANDARDS FOR VERIFICATION.
USAGE AND APPLICATION INFORMATION
CONSULT THE DESIGN MANUAL, BDM-1510 FOR SHAFT AND HOUSING FIT INFORMATION.
CONSULT BOEING RESEARCH & TECHNOLOGY (BR&T) BEARINGS FOR SHAFT AND HOUSING FIT
DESIGN.
OPERATING TEMPERATURE
-65 TO 250 F.
SPECIFY BEARING INSTALLATION AND RETENTION PER BAC5435.
INSTALLATION
TIME FROM DATE OF LUBRICATION TO INSTALLATION OF BEARINGS SHALL NOT EXCEED
84 MONTHS.
DATE
02-SEP-1980
REV (R) 10-DEC-2012
BACB10CK
SH 4
BEARING,
ROLLER, SINGLE ROW,
SELF-ALIGNING
BOEING PART STANDARD
Copyright © Boeing. All rights reserved. See Cover Page.
CAGE CODE 81205
BACB10CK
SH 4
BOEING PROPRIETARY
EXPORT CONTROLLED ECCN EAR99
******* PSDS GENERATED *******
Boeing Proprietary
Basic Control
FOR STATUS OF INACTIVATION
SEE APPLICABILITY BLOCK
CODING
DASH NUMBER DESIGNATES BORE "B" IN SIXTEENTHS (.0625).
FIRST LETTER FOLLOWING THE DASH NUMBER DESIGNATES GREASE TYPE:
""
J
= (NO CODE) BMS3-33 (MANDATORY)
= FORMERLY BMS3-33
SECOND LETTER FOLLOWING THE DASH NUMBER DESIGNATES SEAL MATERIAL:
D
""
= HYTREL
= (NO CODE) PTFE
THIRD LETTER FOLLOWING THE DASH NUMBER DESIGNATES FINISH:
""
Z
= (NO CODE) CADMIUM OR ZINC-NICKEL PLATE
= ZINC-NICKEL PLATE
EXAMPLE OF PART NUMBER
BACB10CK 10
D
(DRAWING CALLOUT WILL
APPEAR AS BACB10CK10D)
BASIC NUMBER
(NO CODE) CADMIUM OR
ZINC−NICKEL
.6250 BORE DIAMETER
HYTREL SEALS
(NO CODE) BMS3−33
DATE
02-SEP-1980
REV (R) 10-DEC-2012
BACB10CK
SH 5
BEARING,
ROLLER, SINGLE ROW,
SELF-ALIGNING
BOEING PART STANDARD
Copyright © Boeing. All rights reserved. See Cover Page.
CAGE CODE 81205
BACB10CK
SH 5
BOEING PROPRIETARY
******* PSDS GENERATED *******
Boeing Proprietary
EXPORT CONTROLLED ECCN EAR99
Basic Control
FOR STATUS OF INACTIVATION
SEE APPLICABILITY BLOCK
SEE D-590-PREFACE (INDEX) FOR INACTIVATION DEFINITIONS. SEE D-590-SUPERSESSION-LIST
FOR SUPERSESSION CLASS DEFINITIONS AND SUPERSESSION LIST. SEE
D-590-BOEING-TO-VENDOR FOR VENDOR PART NUMBERS.
INACTIVATION APPLICABILITY
BCA, BDS
BCA, BDS
(EXCEPTION BH)
DATE
02-SEP-1980
- BACB10CK( )(NO CODE)(NO CODE)( ) AND BACB10CK( )J(NO CODE)( )
ARE INACTIVE FOR DESIGN AND PROCUREMENT;
BACB10CK( )(NO CODE)D( ) IS A CLASS II SUPERSESSION.
BACB10CK( )JD( ) IS INACTIVE FOR DESIGN AND PROCUREMENT;
BACB10CK( )(NO CODE)D( ) IS A CLASS I SUPERSESSION.
- BACB10CK( )(NO CODE)D(NO CODE) REMAINS ACTIVE FOR DESIGN
AND PROCUREMENT, BUT MAY BE REPLACED BY
BACB10CK( )(NO CODE)DZ AS A CLASS III SUPERSESSION. EFFECTIVE
10-DEC-2012.
REV (R) 10-DEC-2012
BACB10CK
SH 6
BEARING,
ROLLER, SINGLE ROW,
SELF-ALIGNING
BOEING PART STANDARD
Copyright © Boeing. All rights reserved. See Cover Page.
CAGE CODE 81205
BACB10CK
SH 6