EML2322L – Fall 2025
Project Description
Air Engine Powered Slicer
The Design and Manufacturing Laboratory project consists of two major components:
(1) development of the conceptual design of a functional device that meets specific engineering
requirements and,
(2) detailed documentation of manufacturing quality inspection and engineering changes for
small batch production.
These two projects overlap in their use of the dual-action two-stroke compressed air powered piston
engine pictured above. The air engine is a simple mechanical device that connects to a compressed air
supply using a push-to-connect fitting (not shown) and oscillates/reciprocates to provide motion to the
flywheel. The flywheel mass maintains system momentum (like the crankshaft in a combustion engine).
Detailed requirements for the design project portion are outlined below and further expanded in the
assignment pages for Design Report 1, Design Report 2, and Design Report 3, respectively.
The air engine manufacturing portion is covered below and in the pages for the Revised Production
Drawings and Air Engine Assembly and Documentation assignments.
Please see the respective assignment pages for specific details on report and assignment requirements.
The following is a brief overview of requirements for the two project segments.
Design Project – Slicer
You are tasked with designing a food slicer that will be powered by the air engine. Concepts submitted
must be able to fully function as intended (proper support for rotating/sliding contacts, adequately
constrained motion, sufficient stroke length, no interferences etc.) and take into consideration safety of
operation. You do not need to worry about the amount of power or torque provided by the air engine.
Additionally, your design must meet the following requirements:
1) The device must be powered by the air engine through interfacing with either:
a. the shank of shoulder screw connecting the flywheel and piston, or
b. the outer cylindrical surface of the flywheel.
c. A 10% bonus will be provided to designs that do not use any gears or pulleys, so long as
those designs meet all other functional requirements.
2) Components of the device that will contact food must be constructed from food-safe materials.
3) The device must be adjustable to allow for variation in slice thickness.
a. Thickness adjustment must be able to lock in place such that slice thickness won’t change
during operation of the slicer.
4) The device must have sufficient displacement or slicing range to fully cut through a variety of
common foods (carrots, cheese, onions, etc.)
5) The device must consist of no fewer than four (4) and no more than twelve (12) components
needing to be manufactured.
a. Minor modifications to existing air engine parts do not count against this limit;
remanufacturing to change overall size/geometry does.
b. Modifying off-the-shelf (OTS) components (e.g. drilling a hole through a purchased pin
or screw) does count against this limit.
6) No more than one (1) part in your design can be manufactured using additive manufacturing (3D
printing, etc.), and no more than one (1) part can be CNC machined or cut via an automated
manufacturing process (waterjet, laser cutters, etc.).
7) Your budget for constructing the device is $100 including the cost of all raw materials, fasteners,
and other OTS components.
a. Raw material prices can be found on Canvas or can be looked up through an online
vendor such as Online Metals or McMaster-Carr
i. The scrap/trade-in value for raw materials is not an acceptable raw material cost.
b. Fasteners should be priced as the cost-per-fastener, not the cost for a package.
c. All OTS components must include reference documentation (URL, screenshot, official
quotation, etc.)
The design project will culminate with sufficient documentation to ensure that your design can be handed
off to a machinist/technician (or yourself) for manufacturing and assembly.
Note: You won’t be manufacturing the devices you design this semester; however, should you want to
machine your design later, it is necessary to have suitable drawings, BOM, etc. At the conclusion of
DML, you are welcome to construct your design using the MAE Student Shop facility during its open shop
hours.
Manufacturing Project
The manufacturing portion of the project will apply the fundamentals you have learned while learning to
machine using the provided part/assembly drawings. After completing your first assembly following the
provided instructions you are tasked with completing three additional air engine assemblies.
These assemblies must:
1) Have revised part drawings and revision documentation beyond the drawings provided on the
course website to improve manufacturability for making multiple prototypes.
2) Include justification for changes to tolerances and manufacturing steps made to the original
versions that are worked on with your TAs.
3) Consist of fully interchangeable parts between each independent assembly and the components
made while training on the machines with your TA.
4) Be accompanied by complete and well-organized manufacturing and inspection documentation
(Manufacturing Inspection Reports, Engineering Change Notices, etc.)