Dilla University
College of Engineering and Technology
Department of Electrical & Computer Engineering
Course code
ECEg2041
Course Title
Fundamentals of Electrical Engineering
Degree Program
BSc in Electrical and Computer Engineering
Module Name
Basic Electrical Engineering
Module Code
ECEgM2043
Module Coordinator
Course instructor
Seid A.
5/3
ECTS/Cr.
Student work load
Course Objective
Lecture
Tutor
Laboratory
Home study
32
48
96
Understand circuit variables, parameters and the basic electromagnetic
phenomenon.
Understand and apply the fundamental and derived circuit laws and theorems to
the analysis of DC circuits.
Understand the basic electromagnetic phenomenon, circuit variables and
parameters.
Understand and apply the fundamental and derived circuit laws and theorems to
the analysis of steady state single phase and poly phase ac circuits.
Course Description
Be familiar with some simulation software for different circuits
Electrical charge, voltage, current, power, electromagnetism, voltage sources, current
sources, Resistor, Capacitor, Inductor, Ohm’s law, Kirchhoff’s law, Nodal analysis,
Loop analysis, Source transformation, Linearity and superposition, Thevenin’s and
Norton’s theorems, Mathematical development of response of first order transient
circuits equation, Analysis techniques, Pulse response, Mathematical development of
response of second order transient circuits equation and network response,
Electromagnetism, Single phase AC circuit analysis, Poly phase circuits and Resonance
Course content
1.
Basic Electrical Engineering Parameters
Charge, Coulomb's Law, electric field, voltage, current, energy and power; Faraday's
Law-self and mutual inductances
2.
Electric Circuit parameters
Circuit, energy and, geometrical viewpoints of circuits parameters (R,C,L); electric
sources (ideal/real; independent/dependent) DC Circuit Analysis with fundamental and
derived circuit laws
3.
Circuit Analysis:
Kirchhoff's laws (KVL & KCL); circuits simplifications (series and parallel connections
of R, L, C and sources); star (Y) - delta (Δ) transformation; mesh analysis; nodal
analysis; linearity and the superposition theorem; Thevenin's and Norton's theorems;
maximum power transfer
4.
Steady State Single Phase AC Circuit Analysis:
Sinusoidal terminologies; instantaneous, average and effective (rms) values; phasor
representation of sinusoids and arithmetic; series and parallel RLC circuits; immittance
(impedance or admittance); frequency response and resonance; active (average), reactive
and apparent powers; power factor; power factor correction; maximum power transfer in
ac circuits; load/power flow method of ac circuit analysis
5.
Transient Circuit Analysis:
First Order Transient Circuits: RL and RC Transient Characteristics and Solutions;
Second Order Transient Circuits: RLC Transient Circuits; Higher Order Circuits and
Approximations; Three Phase AC Circuits:
6.
Introduction to poly-phase systems;
generation of three phase voltages; star (Y) and delta (Δ) connections; load/power flow
method of three phase ac circuit analysis; power in unbalanced three phase systems.
Pre- request
Co- request
ECEg1042: Applied Mathematics I
Year /semester
Compulsory
Status of the course
Teaching and learning method
Lecture supported by tutorial, assignment and laboratory exercises.
Assessment /Evaluation and
Continuous Assessment with Assignment, Tests and Quiz (50%), Final examination
grading system
(50%)
Course policy
All students are expected to abide by the code of conduct of students Senate Legislation
of our University throughout this course.
Academic dishonesty, including cheating, fabrication, and plagiarism will not
be tolerated.
Class activities will vary day to day, ranging from lectures to discussions.
Students will be active participants in the course.
You are required to submit and present the assignments provided according to
the time table indicated.
85% of class attendance is mandatory! Please try to be on time for class.
Active participation in class is essential and it will have its own value in your
grade Cell phones MUST be turned off before entering the class
Literatures
Text book
J.E.Kemmerly, Steven M.Durbin, Willian H.Hayt: Engineering Circuit Analysis,
McGraw-Hill Higher Education : Jan, 2006
Reference
1.
Basic Electrical Engineering, by A.E. Fitzgerald & D.E.Higginbotham, 1996.
2.
Electrical Circuits, by Siskind, 1995.
3.
Elements of Electrical Engineering, by Cook and Carn, 2001.
4.
T.F. Bogart: Electric Circuits, 2001.
Approved By:
________________________
Name (Course instructor)
_________________________
Name (Module Coordinator)
________________
Signature
________________
Signature