Chapter 5
Chirality: Handedness, or in other words, the inability to superimpose the mirror image onto
the original.
Think about it: Your right and left hands are mirror images, but you can’t perfectly
superimpose your right onto your left. Therefore your hands are “chiral”.
Rule: If there is a plane of symmetry, compound is achiral!!
Recall that isomers are compounds with the same molecular formula but different structures
We learned a class of isomers, constitutional isomers, that differ in connectivity.
Stereoisomers are the same in connectivity but different in orientation.
Two types of stereoisomers:
Diastereomers - Non-mirror images, like cis and trans
Enantiomers - Nonsuperimposable mirror images, result from chirality
Here, there is no way to make these identical by just rotating and flipping, so they are
nonsuperimposable, therefore enantiomers
Chiral centers: A chiral center is a carbon that has 4 different groups attached to it, like the
ones above.
Convention: Line - Plane of page, Wedge - Front, Dash - Back
Ingold-Prelog-Kahn System (or the R/S) system.
1. Assign priority rules around the chiral center
● First base on the directly attached atom’s atomic number (Cl > O > C)
● If there’s a tie, base it on what is attached to that atom (so COOH > CH3, because
O>C, and C(CH3)3 > CH3, because more carbons attached to the carbon
2. Put an a, b, c, d, on the first, second, third and fourth priorities
3. Draw a circle between a b and c.
4. Determine whether it’s clockwise or counterclockwise. BUT IF THE “d” priority is in
the front, FLIP IT (CW = CCW, and CCW = CW)
5. If Clockwise, the center is “R”, if counter, center is “S”
Example: The compound above (original, not mirror). Priority: 1: OH (directly attached rule)
O>C>H, 2: Second attached rule COOH, 3: CH3 (directly attached C>H). 4:H
The circle goes counterclockwise, H is in the back, so no flip, “S” orientation
Naming:
Let’s say you have 4-fluoro-2-methylhexane. The chiral centers are carbons 2 and 4. (prove
this to yourself by drawing and looking for the groups. The first center was R, second was S,
so name is (2R,4S) - 4-flouro-2-methylhexane.
Meso Compounds: Normally the number of possible enantiomers is 2^(number of chiral
centers), but sometimes there ends up being an isomer with a plane of symmetry, so it
doesn’t have enantiomers, as it is achiral. Such compounds are called meso compounds
Chirality centers are also called stereogenic centers, meaning you can change groups and
you get an enantiomer. If the “H” and “CH3” changed places in the compound above, you it
looks the same as the mirror image, which is an enantiomer
Notice here both of these cyclic compounds have a plane of symmetry, so they are both
achiral
Fischer projections: Three dimensional formulas to a fischer to simplify the drawing. Each
horizontally attached group is wedged, each vertically attached is dashed
So given a fischer, make all the horizontal groups wedged and dash the vertical. Then you
can assign priority rules like normal, and do R/S orientation
Enantiomers have the same physical and chemical properties. (While, on the other hand,
diastereomers have the different properties) The difference, optical activity. Chiral molecules
rotate plane-polarized light
Polarimeter: If analyzer is rotate clockwise, it is dextrorotatory, if counter, levorotatory.
HOWEVER, YOU CANNOT BASE THIS OFF A COMPOUND’S R OR S ORIENTATION
A racemic mixture (equimolar amounts of both enantiomers) mirrors (yeah, that’s a chirality
pun) the behavior of an achiral compound in that there is no rotation.
Some compounds that don’t have 4 bonds can be chiral too, like allenes
Look here, no plane of symmetry
Chapter 6
Some terms:
Nucleophile: Has a free electron pair or is negatively charged, seeks a positive center
Unimolecular: Reaction rate depends on a single species
Bimolecular: Reaction rate depends on multiple species
Leaving group: The group that leaves a carbon chain
Sn2 reaction: Bimolecular substitution. This happens in one step. On the frontside, the
leaving group leaves and SIMULTANEOUSLY, the nucleophile attacks on the backside. And
the configuration gets inverted.
Let’s do a case study:
Br is the leaving group, OH- is the nucleophile, notice the free pair and negative charge.
Transition state, both are marginally attached but LOOK AT HOW THE TETRAHEDRAL
SHAPE IS CHANGING.
Final product, nucleophile replaces leaving group, configuration is inverted
Carbocation: A carbon-based positively charged electrophile (seeks a nucleophile, seeks e-)
Carbocation Stability: Tertiary > Secondary >> Primary
Sn1 reaction: Unimolecular, rate only depends on nucleophile
1. Leaving group leaves, leaving a carbocation (LOLOL) SLOWEST AND RATE
DETERMINING STEP
2. Nucleophile attaches to carbocation
3. If the result is a protonated alcohol, it deprotonates
So think about it. If one of the steps involves creation of a carbocation, then the substrate has
to lend itself to creation of a stable carbocation, best would be tertiary for Sn1. On the other
hand, best would be primary for Sn2, because Sn2 doesn’t involve creation of a carbocation.
Step breakdown of a sample Sn1
Step 1: Heterolytic cleavage of tert-butyl chloride to create a carbocation
Step 2: Addition of water to create a protonated alcohol
Step 3: Deprotonation of the protonated alcohol
Solvolysis: A special type of substitution, always Sn1, that has the solvent itself as the
nucleophile.
Quick stereochem segway, if you have a optically active substrate, you get a frontside and
backside attack (provided there is space)
Leaving groups:
Reactions for both substitution and elimination go faster if you have a better leaving group.
Weak bases are the best leaving groups, hence, for the halides
I- > Br- > Cl- > FOther weak bases are good too, like p-toluenesulfate and triflate
Solvents:
You can have a few different types of solvents
Nonpolar: We don’t really go into this too much, not important for Sn or E rxns
Polar protic: Has a hydrogen attached to a very electronegative element. (ex. Ethanol or
water) POLAR PROTIC SOLVENTS FAVOR SN1 (but tertiary, primary etc… is a more
important factor)
Polar aprotic: Does not have H attached to a very electronegative element (ex. DMSO,
acetone) POLAR APROTIC SOLVENTS FAVOR SN2
Nucleophilicity:
Polar Protic: More solvated, the worse the nucleophile, so the trend goes opposite of basicity
Notice that within the halogens, I > Br > Cl > F because polarizability of big atoms
Polar aprotic: Nucleophilicities parallel basicities, essentially opposite of protic solvent
nucleophilicities
In an Sn1 reaction, CONCENTRATION OF NUCLEOPHILE HAS NO EFFECT (rate only
depends on substrate)
Sn2: First order relationship between rate and nucleophile
Let’s walk through these:
(1) I is a better leaving group than Cl, so the bottom one is faster
(2) (This is a bad question b/c solvent isn’t specified, but let’s assume its water, which is
protic) SH- is a better nucleophile in a protic solvent, so top reaction
(3) Ethanol is a protic solvent, so a tertiary carbocation, which can perform Sn1 best,
would be favored, so top is favored
(4) Primary substrate, so Sn2 reaction for sure, so you want the aprotic solvent, which
favors Sn2. That’s the bottom one
New class of reactions, eliminations: Remove fragments from reactant, form a multiple bond
(like alkane to alkene)
The main elimination of this chapter is a dehydrohalogenation, where haloalkane + base →
X- + HB + alkene
This is a haloalkane. The carbon with the halogen is an alpha, the carbon with the removed
H is beta
Dehydrohalogenation in more detail. So you have a haloalkane.
Your leaving alpha halogen ionizes, and your beta hydrogen protonates the base
Like Substitutions, there are 2 varieties, E1 and E2 and they work in the same way
E2: Happens in one step, second order, more towards primary substrates
The base, ethoxide attacks the beta carbon and takes away a hydrogen
The bromine, the leaving group on the alpha carbon, starts to, well, leave
Transition: H and Br are in the middle of leaving, you have a partial bond (like 1.5) between
the carbons
You end up getting a full double bond and an alkene
E1:
Step 1: Formation of a stable carbocation by leaving group leaving
Step 2: Hydrogen leaves, you get your alkene
Now think about it: Many bases are nucleophiles, many nucleophiles are bases. So, you
don’t always have just substitution or just elimination, there is competition. Who wins tho?
Answer: Depends. How? Answer: I gotchu fam
Sn2 vs E2:
If base is small: Methyl substrates and primary unhindered substrates favor Sn2 reaction,
secondary substrates, or ones with steric hindrance favor E2
If base is bulky, like a tertbutoxide, then approach to the backside is hard, so E2 is favored
Tertiary substrate: Elimination predominates at high temperatures. This is usually an
Sn1/E1/E2 competition. NOTE: Tert substrates CAN do E2 BUT NOT SN2. If the base is
strong like an ethoxide, E2 dominates
Higher temps favor elimination over substitution
If a strong nucleophile is weak base, though, substitution is favored, and vice versa
Also, lemme attach my IR guide from study guides 1 and 2
First I’ll start with my IR guide from guide 1, because IR will be on the test.
IR spectra: Vibrations depend on functional groups and types of bonds, and different groups
create different wavenumbers
What to look for:
Alkane:
Big sp3 C-H peak around 3000, nothing else really until below 1500, smaller peaks for
stretches, wags, bends, etc… (Very quiet spectrum)
Alkene:
Big sp3 peak AND big sp2 peak around 3000, C=C double bond peak around 1600
N.B. For alkene/alkyne, if the double and triple bond peak are deep, they are on terminal
carbons, because of asymmetrical stretch
Alkyne:
Big sp3 peak AND big sp peak around 3000 and 3300, C - - - C triple bond peak around
1900-2000
Carboxylic Acid:
1700 - C=O carbonyl peak. Also around 3400-3500, combined peaks of sp3 and OH, so very
broad.
Aldehyde:
1700 - C=O carbonyl peak, sp3 peak AND sp2 peak around 3000
Ketone:
1700 - C=O carbonyl peak, just sp3 peak around 3000
Ester:
1750 - C=O carbonyl peak and C-O stretches around 1200
Alcohol:
3500 - broad OH peak, no C=O peak.
Amine:
3500 - Clear NH stretches (not rounded), no C=O peak
Amide:
3500 - Clear NH stretches (not rounded), yes C=O peak at around 1700
Aromatic:
Around 1700-1900, small, sharp but not deep peaks, about 3-4
Nitrile:
Large C - - - N stretch around 2250