SRI CHAITANYA TECHNO SCHOOL ,IYYAPPANTHANGAL
ACADEMIC YEAR:2025-26
PROJECT REPORT ON
(TRANSFORMER)
ROLL NO
:
NAME
:
S MANYA
CLASS
:
XII
SUBJECT
:
PHYSICS
SUB CODE
:
042
PROJECT GUIDE
: Mr. S. NAKULADITHYA
PGT (PHYSICS)
SRI CHAITANYA TECHNOSCHOOL,
IYYAPPANTHANGAL, CHENNAI
{ PAGE \* MERGEFORMAT }
SRI CHAITANYA TECHNO SCHOOL, IYYAPPANTHANGAL
CERTIFICATE
This is to certify that Cadet S MANYA Roll No:_____________has successfully
completed the project Work entitled (TRANSFORMER) in the subject PHYSICS (042) laid
down in the regulations of CBSE for the purpose of
Practical Examination in Class XII
to be held in Sri Chaitanya Techno School IYYAPPANTHANGAL on______________.
DATE: PRINCIPAL
INTERNAL EXAMINER
EXTERNAL EXAMINER
{ PAGE \* MERGEFORMAT }
ACKNOWLEDGEMENT
Apart from the efforts of me, the success of any project depends largely
on the encouragement and guidelines of many others. I take this opportunity to
express my gratitude to the people who have been instrumental in the successful
completion of this project.
I express deep sense of gratitude to almighty God for giving me strength
for the successful completion of the project.
I express my heartfelt gratitude to my parents for constant encouragement
while carrying out this project.
I gratefully acknowledge the contribution of the individuals who
contributed in bringing this project up to this level, who continues to look after
me despite my flaws,
I express my deep sense of gratitude to the luminary The Principal, who
has been continuously motivating and extending their helping hand to us.
My sincere thanks to Mr. S. NAKULADITHYAMaster In-charge, A
guide, Mentor all the above a friend, who critically reviewed my project and
helped in solving each and every problem, occurred during implementation of
the project
The guidance and support received from all the members who contributed
and who are contributing to this project, was vital for the success of the project.
I am grateful for their constant support and help.
{ PAGE \* MERGEFORMAT }
TABLE OF CONTENTS
S.NO
CHAPTERS
PAGE NO
AIM
1
INTRODUCTION
2
PRINCIPLE
3
PROCEDURE
4
APPLICATIONS
5
OBSERVATION
6
CONCLUSION
7
PRECAUTIONS
BIBILIOGRAPHY
{ PAGE \* MERGEFORMAT }
AIM
To explore and understand the process of electromagnetic induction
INTRODUCTION
Electro Magnet
An electromagnet is a type of magnet in which magnetic fields are produced by the flow of
electric current through a coil of wire. Its magnetism exists only while current flows and
disappears when the current is switched off.
Induction
Induction is the process by which a changing magnetic field produces an electric current in a
conductor. It is a fundamental principle used in devices like transformers, generators, and
induction motors.
Electromagnetic Induction:
Electromagnetic induction is the process by which an electric current is generated in a
conductor when it is exposed to a changing magnetic field. Discovered by Michael Faraday,
this phenomenon forms the basis of many electrical technologies. When a conductor moves
through a magnetic field, or when the magnetic field around a stationary conductor changes,
it causes electrons within the conductor to move, creating an induced current. The magnitude
of this induced current depends on factors such as the strength of the magnetic field, the
speed of motion, and the number of turns in the coil. Electromagnetic induction is
fundamental to the operation of generators, transformers, induction motors, and various
sensing devices used in modern electrical systems.
Magnetic Flu:
Magnetic flux is the measure of the total magnetic field passing through a given surface.
It indicates how many magnetic field lines intersect the surface and depends on the field
strength, the area, and the angle between them.
Magnetic flux is given by the formula: Φ = B A cos θ, where Φ is flux, B is magnetic field
strength, A is area, and θ is the angle between the field and the surface normal.
{ PAGE \* MERGEFORMAT }
PRINCIPLE
The principle of electromagnetic induction states that an electric current is induced in a
conductor whenever it experiences a change in magnetic flux.This change may occur by
moving the conductor in a magnetic field or by varying the magnetic field around a stationary
conductor.The induced current is produced because the changing magnetic field creates an
electric field within the conductor.This principle is the foundation of devices such as
generators, transformers, and induction motors.
THEORY
Invention
Electromagnetic induction was discovered by Michael Faraday in 1831 during his
experiments with coils and magnets.He found that moving a magnet through a coil, or
changing the magnetic field around it, produced an electric current.This discovery proved that
electricity could be generated from magnetism, establishing a major breakthrough in
physics.Faraday’s invention laid the foundation for modern electrical technologies such as
generators and transformers.
Induced EMFs
When magnetic flux through a coil changes, an emf is produced in the coil. Faraday
discovered that this emf can be generated either by moving the coil relative to the magnetic
field or by altering the magnetic flux itself. The emf exists only as long as the magnetic flux
continues to change.
{ PAGE \* MERGEFORMAT }
Induced EMF (Electromotive Force) is the voltage produced in a coil or conductor when the
magnetic flux linked with it changes. This happens when a magnet moves toward or away
from a coil, or when the coil moves in a magnetic field.
According to Faraday’s Law, the induced EMF is proportional to the rate of change of
magnetic flux. Lenz’s Law states that the induced EMF always opposes the cause producing
it.
Imagine a coil connected to a galvanometer. When a bar magnet is pushed into the coil, the
galvanometer needle deflects, showing an induced EMF. When the magnet is withdrawn, the
needle deflects in the opposite direction. This demonstrates that changing magnetic flux
creates EMF.
PROCEDURE
Electromagnetic induction refers to the production of voltage across a conductor when
exposed to a varying magnetic field.
Working and Construction
Electromagnetic induction works on the idea that a changing magnetic field generates an
electric current in a conductor. When a conductor is placed in a magnetic field and either the
magnet or conductor moves, the magnetic flux linked with it changes. This change pushes
free electrons to move, producing an induced current. The current exists only while the flux
changes, not when the field is steady. This principle forms the basis of electricity generation,
converting mechanical motion into electrical energy using magnets and conductors.
{ PAGE \* MERGEFORMAT }
Electromagnetic induction
Induction works mainly through the movement of a conductor through magnetic field lines.
When the conductor cuts the lines perpendicularly, maximum current is generated. Slow
motion causes a small flux change, producing weak voltage, while faster movement creates a
stronger voltage. The direction of induced current depends on both the magnetic field
direction and the conductor’s motion. These relationships allow devices like generators and
dynamos to efficiently convert mechanical motion into electrical energy for practical use in
power generation systems.
The construction of an induction system usually includes a coil of copper wire acting as the
conductor. Coiling increases conductor length and enhances interaction with magnetic flux.
An iron core placed inside the coil concentrates the magnetic field, improving efficiency. In
AC systems, alternating current in a primary coil creates a changing magnetic field, inducing
current in a nearby secondary coil. This principle forms the working foundation of
transformers and other devices that rely on safe and efficient electrical energy transfer.
{ PAGE \* MERGEFORMAT }
Electromagnetic induction is applied by arranging coils, magnets, and cores to maximize
magnetic interaction. Generators rotate coils in magnetic fields to produce electricity.
Transformers use alternating magnetic fields to transfer energy between stationary coils
without physical contact. Induction cookers and heaters generate high-frequency magnetic
fields that create heating currents in metals. Wireless chargers use paired coils to send power
through air. Proper construction ensures strong magnetic coupling, smooth operation, and
reduced energy loss, making induction vital in many modern technologies.
Lenz’s Law:
According to Lenz’s Law, the direction of the induced emf is such that it opposes the change
in magnetic flux that caused it. If the magnetic field increases, the induced field works
against it; if it decreases the induced field support it. This law explains that the produced in
the wire due to variation of the flux has a direction opposite to the field that produce it and
opposes any change in it.
E = -N (dø/dt)
The equation of the Lenz's law is similar to the Faraday's Law it has a minus sign in it. That
shows it repels the cause that produces it.In simple words, we can say that the current
produced in the conductor always resists it cause that induced it in the conductor.
{ PAGE \* MERGEFORMAT }
This law is a fundamental rule for direction finding of the current produced in the conductive
element and it is similar to the conservation principle of energy. Sometimes current produce
due to magnetic induction create a problem as if the current is passing through such
conductor that is not the part of our desired circuitry, then the flux of the current passing the
conductor creates current this current's flux distorted our main circuit flux this current is also
known as the eddy current.
{ PAGE \* MERGEFORMAT }
Applications of Electromagnetic Induction
Electrical Generator:
Generators function based on Faraday’s law. Movement of a magnet relative to a conductor
produces an emf. It converts kinetic energy into electrical energy and produces electricity in
power plants. The electricity is then supplied to homes.
Electrical Transformer
Transformers operate using electromagnetic induction. A changing current in one coil creates
a changing magnetic field, inducing voltage in a nearby coil. This induced voltage enables
energy transfer between primary and secondary coils.
{ PAGE \* MERGEFORMAT }
Magnetic Flow Meter:
Magnetic flow meters measure the flow of conductive liquids using Faraday’s law. The
induced voltage in a magnetic field is proportional to the velocity of the flowing liquid. The
induces voltage is expressed as,
Where, v – velocity of conductor (flow); m/s
l – length of conductor = diameter of pipe ;m
B = flux X density ; wb/m2
{ PAGE \* MERGEFORMAT }
OBSERVATION
1. When the magnet is moved slowly, the magnetic field changes gradually, producing a
small induced voltage.
2. When the magnet is moved faster, the magnetic field changes more rapidly, producing
a larger induced voltage.
3. When the same motion occurs through a coil with more turns, a greater voltage is
induced.
APPLICATIONS
Electromagnetic induction is used in several devices and technologies, including:
Electrical generators
Induction motors
Induction sealing
Inductive charging
Transformers
Wireless power transmission
Loudspeakers
Medical devices such as MRI scanners
CONCLUSION
Faraday’s Law explains how a changing magnetic field creates electric potential. Despite its
mathematical complexity, the concept is simple: varying magnetic fields generate voltage.
This principle is fundamental to many technologies from solar radiation to wireless
communication and electricity generation highlighting its profound impact on daily life.
{ PAGE \* MERGEFORMAT }
PRECAUTIONS
Avoid exposure to high voltages.
Handle all laboratory instruments carefully.
Do not scratch insulated copper wire while making coils.
Avoid using a digital voltmeter for this demonstration.
BIBLIOGRAPHY
Wikipedia
Google search engine
NCERT Physics (Class XII)
{ PAGE \* MERGEFORMAT }