Initial survey report
Report on the survey work on the site in Diyala Governorate
Site selection
The surveying work for the selected area was carried out after conducting
preliminary investigations and selecting the selected area and its corner
coordinates.
Coordinate System:
Ellipse: WGS 84
Projection: UTM Zone 38
Reference Frame: ITRF 20
The aerial survey was conducted using UAV-RTK technology and the corrections
were made on the local network (INC).
GCP has also been used to check the spatial reference and level accuracy of
topographic surveys of the surveyed area.
GCP Coordinates
Calculation
AutoCAD Civil 3D was used to calculate quantities. The two-surface
comparison method was used, with the base surface representing the
natural ground surface of the proposed area and the natural ground
surface of the proposed road at each time, while the comparison surface
represents the surface level after elevation (98 meters).
The results were as follows:
Proposed area quantities:
Proposed road quantities: