Q. A force P is applied O to the string AOB. If tension in each part of the string is 50 N, find the
magnitude and direction of force P for equilibrium conditions. Refer Figure below
Q. Determine the resultant of the four forces and one couple about point O which act on
the plate shown in figure below.
Q. Replace the loading by an equivalent resultant force and specify where the resultant’s
line of action intersects the member AB, measured from A. Refer to Figure below.
Q. A plate in the shape of a parallelogram is acted upon by two couples. Determine (a) the
moment of the couple formed by the two 21-lb forces, (b) the perpendicular distance between
the 12-lb forces if the resultant of the two couples is zero, (c) the value of α if the resultant
couple is 72 lb in. clockwise and d is 42 in. Refer to Figure below.
Q. Two couples act on the beam as shown in figure below. Determine the magnitude of F so
that the resultant couple moment is 450 lbft, counterclockwise. Where on the beam does the
resultant couple moment act?
Q. A stake is being pulled out of the ground by means of two ropes as shown. Knowing the
magnitude and direction of the force exerted on one rope, determine the magnitude and
direction of the force P that should be exerted on the other rope if the resultant of these two
forces is to be a 40-lb vertical force. Refer figure below.
Q. Two cables are tied together at C and loaded as shown in figure below. Determine the
tension (a) in cable AC, (b) in cable BC.
Q. Four forces act on a 700x375 mm plate as shown in figure below Find the resultant of these
forces. (b) Locate the points where the line of action of the resultant intersects the edge of the
plate.
Q. A sailor is being rescued using a boatswain’s chair that is suspended from a pulley that
can roll freely on the support cable ACB and is pulled at a constant speed by cable CD.
Knowing that α = 30° and β = 10° and that the combined weight of the boatswain’s chair and
the sailor is 900 N, determine the tension (a) in the support cable ACB, (b) in the traction
cable CD. Refer Fig below
Q. Knowing that a α is 55° and that boom AC exerts on pin C a force directed along line AC,
determine (a) the magnitude of that force, (b) the tension in cable BC. Refer Fig below.
Q. Determine the magnitude of the pull exerted on the nail A if a horizontal force of 200 N is
applied to handle a nail puller as shown in Fig below.