Responsibilities
To provide safety engineering services during FEED & Detailed Engineering of Fixed Offshore Platforms and Floating Production Storage and Offloading vessels (FPSO) as Lead HSE Engineer.
To assist the Project Manager & other project team members to achieve the project HSE objectives during execution.
Support the department in establishing and updating procedures and standards.
To train the subordinates and enhance the skills of HSE team members.
Preparation/Review of various Safety Engineering deliverables such as
Safety Concept/HSE Philosophy/Safety Design Basis/Fire Protection Philosophy/Loss Prevention Philosophy
Quantitative Risk Assessment (QRA)
Fire & Explosion Risk analysis (FERA)
Emergency System Survivability Analysis (ESSA)
Escape, Evacuation and Rescue Analysis (EERA)
Vent/Flare Radiation and Dispersion Study using PHAST/FLARESIM/FRED
HSE Critical Equipment & Systems (HSECES) identification & performance standards/safety critical equipment Register
ALARP (As Low As Reasonably Practicable)
HAZID (Hazard Identification)/HAZOP (Hazard & Operability)/SIL (Safety & Integrity Level) Studies
Design Risk Analysis (w.r.t-Dropped Object analysis, fire/explosion scenarios), LOPA
Emergency Preparedness Analysis (EPA)
Hazardous Area Classification (preparation of Hazardous Equipment schedules and Hazardous Area Classification Layouts)
Ergonomic studies/Human Factors
Escape Route Layout/Fire Fighting, Safety & Life Saving Equipment Layouts/Safety Sign Layout
Fire Zone, Restricted Area, and Impacted Area
Passive Fire Protection Plans, Engineering, Studies, Philosophy, Specification
Active Fire Protection Plans, Specification (fixed water/foam/water mist systems)/Portable Fire Extinguishers Layout/Fire Safety Assessment/Fire Protection analysis
PIPENET-Hydraulic Calculations of fire water systems & Dispersion Modelling
HSE reviews, HSE audits, etc. Covering engineering and similar HSE Engineering works
P&IDs and PFD reviews
Bow Tie Diagrams (Bow Tie XP)
Preparing/reviewing/updating of various documents prepared by third parties and other engineering disciplines on safety aspects.
0
