S-631-01
Supplementary Specification
for General Requirements for
Offshore Structures
JANUARY
2020
Supplementary Specification for General Requirements for Offshore Structures
Acknowledgements
This IOGP Specification was prepared by a Joint Industry Project 35,
Standardization of Offshore Structures Specifications organized
by IOGP with support by the World Economic Forum (WEF).
Disclaimer
Whilst every effort has been made to ensure the accuracy of the information
contained in this publication, neither IOGP nor any of its Members past present or
future warrants its accuracy or will, regardless of its or their negligence, assume
liability for any foreseeable or unforeseeable use made thereof, which liability is
hereby excluded. Consequently, such use is at the recipient’s own risk on the basis
that any use by the recipient constitutes agreement to the terms of this disclaimer.
The recipient is obliged to inform any subsequent recipient of such terms.
This publication is made available for information purposes and solely for the private
use of the user. IOGP will not directly or indirectly endorse, approve or accredit the
content of any course, event or otherwise where this publication will be reproduced.
Copyright notice
The contents of these pages are © International Association of Oil & Gas Producers.
Permission is given to reproduce this report in whole or in part provided (i)
that the copyright of IOGP and (ii) the sources are acknowledged. All other rights are
reserved. Any other use requires the prior written permission of IOGP.
These Terms and Conditions shall be governed by and construed in accordance
with the laws of England and Wales. Disputes arising here from shall be exclusively
subject to the jurisdiction of the courts of England and Wales.
Page 2 of 8
S-631-01
JANUARY 2020
Supplementary Specification for General Requirements for Offshore Structures
Supplementary Specification for
General Requirements for Offshore
Structures
Revision history
VERSION
1
Page 3 of 8
DATE
AMENDMENTS
13 JANUARY 2020
Issued for Publication
S-631-01
JANUARY 2020
Supplementary Specification for General Requirements for Offshore Structures
Contents
Foreword ............................................................................................................................................................. 5
1.
Scope ........................................................................................................................................................ 7
2.
Normative References .............................................................................................................................. 7
3.
Supplementary Requirements for General Requirements ....................................................................... 7
Page 4 of 8
S-631-01
JANUARY 2020
Supplementary Specification for General Requirements for Offshore Structures
Foreword
A series of Specifications (all parts of S-631) was prepared under a Joint Industry Project 35 (JIP35) by the ‘Offshore
Structures Specifications Task Force’ organised by the International Oil & Gas Producers Association (IOGP) with support
from the World Economic Forum (WEF).
Recent trends in oil and gas projects have demonstrated substantial budget and schedule overruns. The Oil & Gas
Community within the World Economic Forum (WEF) has implemented a Capital Project Complexity (CPC) initiative which
seeks to drive a reduction in upstream project costs with a focus on industry-wide, non-competitive collaboration and
standardisation.
Further to the publication of the IOGP Operators’ Position and Key Messages on Standards (April 2017) and successful
pilot study for IOGP JIP 33 Standardisation of Equipment Specifications for Procurement, the IOGP Offshore Structures
Subcommittee discussed improving efficiency in this discipline by reducing or eliminating variation in requirements between
operating companies and developing common operator requirements for offshore structures. The Offshore Structures
Subcommittee established a Task Force (with administrative support funded by JIP35) to agree on the industry and/or
international standard for each discipline and then develop minimum common requirements to improve efficiency and
quality while reducing variation and cost.
Ten key Oil & Gas Companies from the IOGP membership participated in developing these Specifications, with the objective
to leverage and improve industry level standardisation for projects globally in the oil and gas sector.
The work has developed a minimised set of supplementary requirements for the design and operation of offshore structures
based on a critical review of the ten participating members’ company specifications, building on recognised industry and/or
international standards.
The task covers 11 subdisciplines, each associated with one industry and/or international standard, for application in the
Petroleum and Natural Gas Industries:
1. S-631-01 General requirements for offshore structures
2. S-631-02 Arctic offshore structures
3. S-631-03 Concrete offshore structures
4. S-631-04 Topsides structures
5. S-631-05 Foundations
6. S-631-06 Weight management
7. S-631-07 Station keeping
8. S-631-08 Seismic
9. S-631-09 Metocean
10. S-631-10 Marine soil investigations
11. S-631-11 Fixed steel offshore structures
A twelfth subdiscipline, floating offshore structures, was specified as part of the task but has been deferred due to the
complexity of having a range of classification society rules and the volume of additional company requirements for this
subdiscipline.
The expectation is that the participating and other operating and engineering companies will adopt and reference all parts
of the specification series IOGP S-631 for offshore structures, with the participating companies eliminating the supplemental
requirements from their in-house specifications. Tracking the adoption of the parts of this specification and of the reduction
in company requirements will be managed by the IOGP Offshore Structures Subcommittee.
This series of Specifications has been developed to promote the opportunity to realise benefits from standardisation and
achieve significant cost reductions for upstream project costs. The Offshore Structures Specification Task Force performed
their activities in accordance with IOGP’s Competition Law Guidelines. Terminology used within this Specification is in
accordance with ISO/IEC Directives, Part 2 and as defined in the parent standard.
This series of Specifications aims to significantly reduce waste, decrease project costs and improve schedule through precompetitive collaboration on standardisation. These specifications define the supplementary requirements to recognised
industry and/or international standards which are indispensable for the application of this specification.
Following approval by the IOGP Offshore Structures Subcommittee, IOGP has authorised the publication of this
Specification. Where adopted by the individual operating companies, this Specification aims to supersede existing company
documentation for the purpose of industry-harmonised standardisation.
Page 5 of 8
S-631-01
JANUARY 2020
Supplementary Specification for General Requirements for Offshore Structures
In the event of a conflict between these Specifications and a relevant local law or regulation, the relevant law or regulation
shall be followed. If these Specifications create a higher obligation, it shall be followed as long as this also achieves full
compliance with the law or regulation.
Page 6 of 8
S-631-01
JANUARY 2020
Supplementary Specification for General Requirements for Offshore Structures
1. Scope
This specification provides supplementary requirements and recommendations to ISO 19900.
2. Normative References
The following normative references shall apply:
ISO 19900: 2019
Petroleum and natural gas industries -- General requirements for offshore structures
3. Supplementary Requirements for General Requirements
General Requirements for offshore structures shall be in accordance with ISO 19900: 2019 and the following additional
requirements.
Add the following requirements into the referenced Clause in ISO 19900: 2019
5
Fundamental requirements
5.1
General
Operator shall specify system of units to be consistently applied throughout each Project.
Note: ISO default is to use SI units (e.g. m, kg, N).
6
Basis for design/assessment
6.2
Platform location and orientation
Operator shall specify a single Project datum (reference point) to which all elevations/positions can be related.
11
Models and analysis
Learnings and observations from project-specific model test, historic model tests and/or field monitoring from
operating installations shall be incorporated in structural design/assessment.
The Operator shall decide the extent to which verification and approval, of models to be used in the analysis and
the design/assessment of the structure, is required.
12
Quality management
12.4
Records and documentation of design and construction
Amend Table 2:
All items listed shall be designated ’M’ [minimum requirement] irrespective of exposure level, provided such data
is available.
Annex A (informative) Additional information and guidance
A.10
Design values and partial factors
Note:
National Regulators can specify minimum safety factors or maximum probabilities of structural failure. Some operators
have chosen to capture such local requirements in their global company requirements whilst other operators apply a structurespecific risk-based approach.
END
Page 7 of 8
S-631-01
JANUARY 2020
Supplementary Specification for General Requirements for Offshore Structures
Page 8 of 8
S-631-01
JANUARY 2020