Materials Science Research:
Unveiling Thin Film
Characterization
This presentation explores the process of thin film material preparation.
We will review physical and electrochemical characterization techniques.
Finally, we will see the interaction of thin films with TG beamlines.
PP
by Pn daksheah Pn
Materials of Interest: Composition and Structure
Material A
Material B
Material C
Used for structural modification.
Coated on MOI to enhance properties.
A base compound.
Thin Film Preparation: SolGel Spin Coating
Sol-Gel Processing
Create precursor solution.
Spin Coating
Deposit thin film on conductive substrate.
Annealing
Heat to form desired phase.
Physical Characterization:
Unveiling Material Properties
XRD
UV-Vis
FE-SEM
Determine crystal
Analyze optical
Image surface
structure and
properties and
morphology at
phase.
band gap.
high resolution.
AFM
Map surface
topography at
atomic scale.
Electrode Preparation:
Setting the Stage
1
Phase Confirmation
Ensure material phase
formation.
3
Contact Creation
Establish electrical contact.
2
Electrode Fabrication
Apply electrode material.
Electrochemical Characterization:
Assessing Performance
IV Graph
Measure current-voltage relationship.
Mott-Schottky
Determine semiconductor properties.
Nyquist Plot
Analyze impedance and charge transfer.
OCP
Monitor open circuit potential stability.
TG Beamline Interaction:
Real-Time Visualization
1
Beamline Setup
Align sample with TG beamline.
2
Real-Time Monitoring
Observe material changes under TG irradiation.
3
Image Capture
Record images of beamline interaction.
Key Takeaways and Next
Steps
•
Thin film materials can be carefully prepared by sol-gel spin coating.
•
Physical and electrochemical characterization provides insights into
material properties.
•
TG beamline interaction allows real-time visualization of material
behavior.
Future work will focus on optimizing thin film properties. Further study is
needed to optimize performance and beamline interaction.