FAX CONSULT
LIMITED (FCL)
REQUEST FOR INSPECTION
Project:
Sub Contractor's Name:
Ref No:
Inspection Date:
Location:
This checklist will be initiated by company and will be maintained for each cast in place structure
APPROVED LENGTH
1 BLINDING
0-25
25-50
50-75
75-100
1.1 Preparation of subgrade soil to receive blinding
sign and date sign and date sign and date
sign and date
1.2 Compaction of loose soil receiving subgrade
sign and date sign and date sign and date
sign and date
1.3 Checking of blinding level, horizontal alignment and road width
sign and date sign and date sign and date
sign and date
1.4 Casting of blinding concrete
sign and date sign and date sign and date
sign and date
2.1 Check reinforcement placement as per approved drawings/bar bending schedulesign and date sign and date sign and date
sign and date
2.2 Check Tie wires, Spacers and Cover
sign and date sign and date sign and date
sign and date
2.3 Check Lapping and Anchorage Length
sign and date sign and date sign and date
sign and date
2.4 Clean out loose materials(tie wires, nails, e.t.c
sign and date sign and date sign and date
sign and date
3.1 Check Horizontal Allignment of formwork
sign and date sign and date sign and date
sign and date
3.2 Check quality of shutter lining for required finish
sign and date sign and date sign and date
sign and date
3.3 Check preparation of forms including support,tie rods, cleaniness
sign and date sign and date sign and date
sign and date
3.4 Check plumbness and spacing props
ANY FURTHER COMMENTS OR OBSERVATIONS:
sign and date sign and date sign and date
sign and date
Reccommended for payment
YES
2 CHECKING OF BASE AND WALL REINFORCEMENT
3 CHECKING FORMWORK
NAME
Project Engineer:
Subcontractor's Rep:
NO
N/A
SIGNATURE