Uploaded by dudleytexidor

D-VXR-OE-01 Dell VxRail Operate v2 Exam Dumps

advertisement
Download DELL D-VXR-OE-01 Exam Dumps for best preparation
Exam
:
D-VXR-OE-01
Title
: Dell VxRail Operate v2
Exam
https://www.passcert.com/D-VXR-OE-01.html
1/7
Download DELL D-VXR-OE-01 Exam Dumps for best preparation
1.What is the maximum number of racks supported when expanding a VxRail cluster beyond a single
physical rack?
A. 2
B. 4
C. 6
D. 8
Answer: C
2.What is the correct order of steps to create a VM for a new project using vSAN and VxRail?
Answer:
3.How many Failures to Tolerate can be configured with vSAN RAID-1?
A. 0
B. 1 only
C. 1 or 2 only
D. 1, 2, or 3
Answer: D
2/7
Download DELL D-VXR-OE-01 Exam Dumps for best preparation
4.A VxRail administrator wants to rename the VxRail cluster and the VxRail vSAN datastore.
What is the recommended method to make these changes?
A. Refer to the VMvvare vSphere and vSAN documentation Follow the steps detailed in the VMware
documentation
B. Renaming the objects is not permitted Rebuild the cluster with the desired names
C. Use SolVe to generate the relevant procedures Follow the steps detailed in the procedures
D. Refer to the VxRail Appliance Administration Guide Follow the steps detailed in the guide
Answer: B
5.A VxRail administrator observes alarms that start with VXR in the vSphere client.
How can they obtain information about the alarms and the related knowledge base articles?
A. Go to the Alarm Definitions page and click the KB link.
B. Use the VxRail Event Code Reference.
C. Use the VxRail Administration Guide.
D. Consult the General VMware Knowledge Base.
Answer: B
6.VxRail Manager provides a software stack for a software-defined data center.
Which layers are part of the stack?
A. Storage, security, and management
B. Security, management, and network
C. Network, storage, and security
D. Management, network, and storage
Answer: D
7.What is the sequence of steps to deploy a second VDS for VxRail network traffic?
A. 1. Create port groups on the new VDS for the VxRail networks that must be migrated.
2. Configure ToR switches to support VxRail network traffic on switch ports that are connected to the
VxRail NIC ports.
3. Cable VxRail NIC ports to ToR switches.
4. Configure the new VDS - Add hosts, assign physical adapters, and assign port groups to VMkernel
adapters.
5. Create a VDS with the required number of uplinks.
B. 1. Configure the new VDS - Add hosts, assign physical adapters, and assign port groups to VMkernel
adapters.
2. Create a VDS with the required number of uplinks.
3. Cable VxRail NIC ports to ToR switches.
4. Configure ToR switches to support VxRail network traffic on switch ports that are connected to the
VxRail NIC ports.
5. Create port groups on the new VDS for the VxRail networks that must be migrated.
C. 1. Create a VDS with the required number of uplinks.
2. Configure the new VDS - Add hosts, assign physical adapters, and assign port groups to VMkernel
adapters.
3. Cable VxRail NIC ports to ToR switches.
3/7
Download DELL D-VXR-OE-01 Exam Dumps for best preparation
4. Create port groups on the new VDS for the VxRail networks that must be migrated.
5. Configure ToR switches to support VxRail network traffic on switch ports that are connected to the
VxRail NIC ports.
D. 1. Configure ToR switches to support VxRail network traffic on switch ports that are connected to the
VxRail NIC ports.
2. Configure the new VDS - Add hosts, assign physical adapters, and assign port groups to VMkernel
adapters.
3. Create port groups on the new VDS for the VxRail networks that must be migrated.
4. Cable VxRail NIC ports to ToR switches.
5. Create a VDS with the required number of uplinks.
Answer: A
8.A VxRail administrator wants to determine how long the rebuild will take after experiencing a disk failure
in the vSAN Cluster.
Where is this information located in the vSphere Client?
A. Configure > vSAN > Services > Object repair timer
B. Monitor > vSAN > Resyncing Objects
C. Monitor > vSAN > Data Migration Pre-Check
D. Configure > vSAN > Disk Management
Answer: B
9.What is the correct path for editing the Object Repair Time from the vCenter client?
A. Host > Monitor > vSAN > Services > Object Repair Timer (Repeat for each host)
B. Cluster > Monitor > vSAN > Services > Object Repair Timer
C. Cluster > Configure > vSAN > Services > Advanced Options > Edit
D. Host > Configure > vSAN > Services > Advanced Options > Edit (Repeat for each host)
Answer: C
10.Where in the VxRail Plugin can log bundles be generated?
A. Monitor > VxRail > Issues and alarms
B. Configure > VxRail >Troubleshooting
C. Monitor > VxRail > Security
D. Configure > VxRail > Support
Answer: B
11.A customer has a large storage capacity and low I/O performance requirements.
Which VxRail solution is the best fit?
A. E Series
B. P Series
C. S Series
D. V Series
Answer: C
12.What is true about Multitrack VxRail cluster expansion?
4/7
Download DELL D-VXR-OE-01 Exam Dumps for best preparation
A. All VxRail networks are routable by default
B. VxRail nodes in the same cluster within a rack can be on different subnets
C. VxRail cluster can be expanded up to a maximum of 4 racks
D. VxRail System VMs run on the nodes in the first rack
Answer: D
13.An administrator wants to perform maintenance on a VxRail system.
Which configuration should be used for the VxRail Cluster Health Monitoring before starting the
maintenance activity?
A. Maintenance mode
B. Disabled
C. Enabled
D. Suspended
Answer: B
14.Using VxRail Manager, what information can you find under the physical health view?
A. Model, Temperature, Memory, and Health State
B. Cluster ID, PSNT, Model, and Temperature
C. PSNT, Operational Status, Health State, and Memory
D. Cluster ID, Connected, Health State, and Operational Status
Answer: B
15.When configuring Data at Rest Encryption (DARE) on a vSAN cluster, what is required?
A. vSAN Standard
B. vSAN Advanced
C. External Key Management Server
D. Internal Key Management Server
Answer: C
16.What VxRail Manager activities can be performed by a user with the VMware Administrator role?
A. Build, Manage, Expand, and Shutdown Cluster only
B. Build, Manage, and Expand Cluster Manage HA, DRS, and vSAN settings
C. Build, Manage, and Expand Cluster only
D. Build, Manage, and Shutdown Cluster Manage vSAN settings
Answer: C
17.The vSphere Client is showing several failures on node 3. Support recommends opening an SSH
session to troubleshoot. The connection fails to establish.
Which path should be used to enable SSH on the host from vSphere Client?
A. Host > Configure > VxRail > Enable SSH
B. Cluster > Configure > VxRail > Hosts > Enable SSH
C. Cluster > Monitor > System > Services
D. Host > Configure > System > Services
Answer: D
5/7
Download DELL D-VXR-OE-01 Exam Dumps for best preparation
18.In a VxRail appliance, what does vSAN use in the form of flexible data containers to store and manage
data?
A. Logical volumes
B. nodes
C. Datastores
D. Objects
Answer: D
19.What is used in the VxRail infrastructure to manage multiple clusters of ESXi servers?
A. Host client
B. vCenter
C. VxRail Manager
D. ESXi
Answer: B
20.As a VxRail administrator you have been asked to configure vSAN fault domains After selecting the
VxRail cluster, where would you navigate to in vCenter to accomplish this task?
A. Configure > vSAN > Disk Management > Fault Domains & Stretched Cluster
B. Configure > vSAN > General > Fault Domains & Stretched Cluster
C. Configure > vSAN > Fault Domains & Stretched Cluster
D. Configure > vSAN > Configuration Assist > Fault Domains & Stretched Cluster
Answer: B
21.What is the VxRail API path for downloading the log bundle?
A. /v1/support/logs/(Log ID)
B. /v1/requests/(Request ID)
C. /v1/support/logs
D. /v1/support/logs/(Log ID)/download
Answer: D
22.What enables an administrator to download qualified software products for the VxRail System?
A. Secure Remote Services
B. MyVxRail
C. VxRail Market
D. vSphere Update Manager
Answer: C
23.VxRail Stretched cluster deployment with eight nodes at each data site is being proposed.
What is the latency requirement between each data site and the Witness site?
A. Less than 100 ms
B. Less than 200 ms
C. Less than 10 ms
D. Less than 5 ms
6/7
Download DELL D-VXR-OE-01 Exam Dumps for best preparation
Answer: B
24.A VxRail deployment has eight nodes. The VxRail administrator does not find any compatible
datastores when trying to create a storage policy with FTT=2 and FTM=Erasure Coding.
What is the likely reason?
A. Fault domains have not been configured yet
B. vSAN capacity reserve has been enabled
C. vSAN datastore used capacity is above 80%
D. Erasure coding is only supported on all-flash systems
Answer: D
25.What is the maximum number of nodes supported in a VxRail cluster with 1 GbE networking?
A. 12
B. 8
C. 4
D. 16
Answer: B
26.Which system components are managed through a vCenter plug-in?
A. RecoverPoint for Virtual Machines
vSphere
B. Secure Connect Gateway
vSphere
C. VxRail Manager
RecoverPoint for Virtual Machines
D. VxRail Manager
Secure Connect Gateway
Answer: C
27.An administrator is tasked with remediating the identified security vulnerabilities in the VxRail cluster.
The administrator needs more information to resolve the security issues.
What should be used to gather the required information?
A. Advisories
B. Event Codes
C. Health Analyzer
D. Skyline Health
Answer: B
7/7
Download