Juniper JNCIP Security
JN0-637 Certification
Study Guide
JN0-637 Sample Questions
NWExam.com
www.nwexam.com
Juniper JNCIP Security JN0-637 Certification
Study Guide
Juniper JN0-637 Certification Exam Details
Juniper JN0-637 certifications are globally accepted and add significant value to any IT
professional. The certification gives you a profound understanding of all the workings of
the network models and the devices that are utilized with it. NWExam.com is proud to
provide you with the best Juniper Exam Guides.
The Juniper JN0-637 Exam is challenging, and thorough preparation is essential for
success. This cert guide is designed to help you prepare for the JNCIP Security
certification exam. It contains a detailed list of the topics covered on the Professional
exam. These guidelines for the JNCIP-SEC will help guide you through the study
process for your certification.
To obtain Security Professional certification, you are required to pass the JNCIP-SEC
JN0-637 exam. This exam is created keeping in mind the input of professionals in the
industry and reveals how Juniper products are used in organizations across the world.
JN0-637 JNCIP Security Sample Questions
1
www.nwexam.com
JN0-637 Security Professional Exam Summary
Exam Name
Exam Number
Exam Price
Duration
Number of Questions
Passing Score
Recommended Training
Exam Registration
Sample Questions
Practice Exam
Security Professional
JN0-637 JNCIP-SEC
$400 USD
90 minutes
65
Variable (60-70% Approx.)
Advanced Juniper Security
PEARSON VUE
Juniper JN0-637 Sample Questions
Juniper Networks Certified Professional Security
Practice Test
Topics covered in the Juniper JNCIP Security JN0-637 Exam
Section
Troubleshooting Security
Policies and Security Zones
Logical Systems and Tenant
Systems
Layer 2 Security
Objectives
- Given a scenario, demonstrate how to troubleshoot or
monitor security policies or security zones.
• Tools
• Logging or tracing
• Other outputs
- Describe the concepts, operations, or functionalities of
logical systems.
• Administrative roles
• Security profiles
• Logical system communication
- Describe the concepts, operations, or functionalities of
tenant systems.
• Primary system and tenant system administrators
• Tenant system capacity
- Describe the concepts, operations, or functionalities of
Layer 2 Security.
• Transparent mode
• Mixed mode
• Secure wire
• MACsec
• Ethernet VPN-Virtual Extensible LAN (EVPNVXLAN) security
JN0-637 JNCIP Security Sample Questions
2
www.nwexam.com
Section
Advanced Network Address
Translation (NAT)
Advanced IPsec VPNs
Advanced Policy-Based
Routing (APBR)
Multinode High Availability
(HA)
Objectives
- Given a scenario, demonstrate how to configure or
monitor Layer 2 Security.
- Describe the concepts, operations, or functionalities of
advanced NAT.
• Persistent NAT
• Domain Name System (DNS) doctoring
• IPv6 NAT
- Given a scenario, demonstrate how to configure,
troubleshoot, or monitor advanced NAT scenarios.
- Describe the concepts, operations, or functionalities of
advanced IPsec VPNs.
• Hub-and-spoke VPNs
• Public Key Infrastructure (PKI)
• Auto discovery VPNs (ADVPNs)
• Routing with IPsec
• Overlapping IP addresses
• Dynamic gateways
• IPsec Class of Service (CoS)
- Given a scenario, demonstrate how to configure,
troubleshoot, or monitor advanced IPsec VPNs.
- Describe the concepts, operations, or functionalities of
advanced policy-based routing.
• Profiles
• Policies
• Routing instances
• APBR options
- Given a scenario, demonstrate how to configure or
monitor advanced policy-based routing.
- Describe the concepts, operations, or functionalities of
multinode HA.
Concepts
• Chassis cluster versus multinode HA
• Deployment modes
• Services redundancy group (SRG)
• Interchassis link
• Active/active mode
• Active/passive mode
• Active node behavior (determination and
enforcement)
JN0-637 JNCIP Security Sample Questions
3
www.nwexam.com
Section
Automated Threat Mitigation
Objectives
- Given a scenario, demonstrate how to configure or
monitor multinode HA.
- Describe the concepts, operations, or functionalities of
Automated Threat Mitigation.
• Third-party or multicloud integration
• Secure Enterprise
What type of questions are on the Juniper JN0-637 exams?
●
●
●
●
●
Single answer multiple choice
Multiple answer multiple choice
Drag and Drop (DND)
Router Simulation
Testlet
JNCIP Security JN0-637 Practice Exam Questions.
Grab an understanding from these Juniper JN0-637 sample questions and answers
and improve your JN0-637 exam preparation towards attaining a Security Professional
Certification. Answering these sample questions will make you familiar with the types of
questions you can expect on the actual exam. Doing practice with JNCIP Security
JNCIP-SEC questions and answers before the exam as much as possible is the key to
passing the Juniper JN0-637 certification exam.
JN0-637 Security Professional Sample Questions:
01. What is a function of UTM?
a) content filtering
b) AppFW
c) IPsec
d) bridge mode
Answer: a
02. How does secure wire mode differ from transparent mode?
a) In secure wire mode, traffic can be modified using source NAT.
b) In secure wire mode, no switching lookup takes place to forward traffic.
c) In secure wire mode, security policies cannot be used to secure intra-VLAN traffic.
d) In secure wire mode, IRB interfaces can be configured to route inter-VLAN traffic.
Answer: b
JN0-637 JNCIP Security Sample Questions
4
www.nwexam.com
03. In an effort to reduce client-server latency transparent mode was enabled an
SRX series device. Which two types of traffic will be permitted in this scenario?
(Choose Two.)
a) ARP
b) Layer 2 non-IP multicast
c) BGP
d) IPsec
Answer: a, b
04. All interfaces involved in transparent mode are configured with which
protocol family?
a) ethernet - switching
b) inet
c) bridge
d) mpls
Answer: d
05. You want to use selective stateless packet-based forwarding based on the
source address. In this scenario, which command will allow traffic to bypass the
SRX Series device flow daemon?
a) set firewall family inet filter bypas3_flowd term t1 then virtual-channel stateless
b) set firewall family inet filter bypaa3_flowd term t1 then skip-services accept
c) set firewall family inet filter bypass__f lowd term t1 then packet-mode
d) set firewall family inet filter bypass_flowd term t1 then routing-instance stateless
Answer: b
06. Which two additional configuration actions are necessary for the third-party
feed shown in the exhibit to work properly?
(Choose two.)
a) You must create a dynamic address entry with the IP filter category and the
ipfilter_office365 value.
b) You must apply the dynamic address entry in a security policy.
c) You must apply the dynamic address entry in a security intelligence policy.
d) You must create a dynamic address entry with the C&C category and the cc_offic365
value.
Answer: a, b
JN0-637 JNCIP Security Sample Questions
5
www.nwexam.com
07. Which Junos security feature is used for signature-based attack prevention?
a) RADIUS
b) AppQoS
c) IPS
d) PIM
Answer: c
08. After downloading the new IPS attack database, the installation of the new
database fails. What caused this condition?
a) The new attack database no longer contained an attack entry that was in use.
b) The new attack database was too large for the device on which it was being installed.
c) The new attack database was revoked between the time it was downloaded and
installed.
d) Some of the new attack entries were already in use and had to be deactivated before
installation.
Answer: a
09. Which two statements are true about ADVPN members?
(Choose two.)
a) ADVPN members are authenticated using certificates.
b) ADVPN members are authenticated using pre-shared keys.
c) ADVPN members can use IKEv2.
d) ADVPN members can use IKEv1.
Answer: a, c
10. You are deploying a virtualization solution with the security devices in your
network Each SRX Series device must support at least 100 virtualized instances
and each virtualized instance must have its own discrete administrative domain.
In this scenario, which solution would you choose?
a) VRF instances
b) virtual router instances
c) logical systems
d) tenant systems
Answer: c
Not every IT certification is intended for professionals, but Juniper certification is a great
deal. After achieving this Juniper JN0-637, you can grab an opportunity to be an IT
professional with unique capability and can help the industry or get a good job. Many
individuals do the Juniper certifications just for the interest, and that payback as a
profession because of the worth of this course.
JN0-637 JNCIP Security Sample Questions
6