Uploaded by caparo

Fowler-Z-CAT-Shop-Floor-CMM

advertisement
Z-CAT
Product Data Sheet
System Components
Z-CAT 600c
Z-CAT 600i
Z-CAT CMM
Z-CAT CMM
ControlCAT metrology software
I++ software interface
Renishaw TP20
Renishaw TP20
Training part and calibration sphere
Training part and calibration sphere
Quick start guide
Quick start guide
Reusable shipping container
Reusable shipping container
Standard 1 year warranty
Standard 1 year warranty
Optional Components
Excel export software
Tablet ControlCAT software
Hard transportation case
Optional ControlCAT software
Optional I++ software interface
Repeatable quick release mounting system
Premium 1 year certification and warranty
Software
ControlCAT Metrology Software
• Easy to use geometric measurement tool
• Measures manually or DCC. Creates constructions for most common
geometrics including:
Plane
Line
Point
Sphere
Circle
Slot
Cone
Reference
• Reports actual and nominal information
• Program remembers geometry and plays back for repetitive part
measurements.
I++ Server Software
• Works with standard metrology software including:
Rational DMIS
PCDMIS
CMM Manager
Powerinspect
• Ability to connect to multiple Z-CATs from a single network station
Rational
DMIS
CMM
Manager
Power
Inspect
PCDMIS
Willrich Precision Ph 866-945-5742 email: sales@willrich.com
Z-CAT Specifications
Working volume
B89 Volumetric accuracy
B89 Repeatability
Fixturing accuracy requirement
Machine speed
Machine air requirement
Construction
Machine power requirements
Battery life
Power consumption
Manual motion control
Controller
Temperature compensation
Probe Type
Machine weight
Machine dimensions (W x D x H)
X and Y 600mm diameter, Z 275mm
8.0µ
3.0µ
5mm
User controlled to 150 mmps
None required
Stainless steel for all structural components
100-240 V AC±10%, 50-60Hz
4 hours with normal use, 3 hours at peak
Peak 15 W, normal 10 W
User controlled by hand movement of probe
Onboard PCB provides motion control, error mapping, I++ server and ControlCAT metrology software
Onboard monitoring and compensation
Touch trigger probe
12kg, 27lbs
40mm x 180mm x 650mm
Z-CAT Ordering
Willrich Precision Ph 866-945-5742 email: sales@willrich.com
Download