PRODUCT DATASHEET
APXVBLL26X_43-C-I20B
RF X-TREMEŒTriple Band Antenna, 694-960/2x1695-2690MHz, 65deg, 16.5-18.5dBi, 2.6m,
VET, 0-10/2-12deg, 4.3-10 Connectors, Integrated RET & Bias-Tee
This antenna is an ideal choice for triple band site upgrades for high traffic areas. It can be used
for multiple bands such as Digital Dividend, CDMA, GSM, DCS, PCS, UMTS, LTE 2.6 and LTE700.
Additionally, one low-band port is equipped with a Bias-Tee port to implement the AISG
interface.
FEATURES / BENEFITS
Tripleband cross-polarized with 3 arrays (6 ports), 1x 694-960 / 2x 1695-2690 MHz
Ultra-broadband design for LTE700, LTE800 and LTE2600 compatibility
Variable electrical downtilt ³provides enhanced precision in controlling intercell interference
Easy manual overdrive ³streamlines installation and ensures ease-of-use
Integrated RET serial numbers available on antenna radome ³eases on-site commissioning
and secures remote mapping from OMC
Enable MiMo 4x4 or 4-way RX diversity ³Ideal solution for LTE advance
High suppression of upper sidelobes ³reduces cell interference
Dual polarization ³triple band version
Design incorporates low windload and low weight ³minimizes tower loading
Quick and easy to install ³reduces installation time and costs
High reliability ³designed to last in a tower top environment
Integrated Bias-Tee on the low band port
Technical Features
ELECTRICAL SPECIFICATIONS
Frequency Range
MHz
694-793
790-862
880-960
1695-1880
1850-1990
1920-2170
2300-2400
2500-2690
dBi (dBd)
15.9 (13.8)
16.4 (14.3)
16.9 (14.8)
16.5 (14.4)
16.7 (14.6)
17.2 (15.1)
17.3 (15.2)
17.6 (15.5)
Horizontal Beamwidth
deg
73
70
68
70
67
63
60
65
Vertical Beamwidth
deg
9
8
7.3
6.8
6.3
6
5.2
4.8
Electrical Downtilt Range
deg
0-10
0-10
0-10
2-12
2-12
2-12
2-12
2-12
1st Upper Sidelobe Suppression
dB
15
16.7
16.4
18.2
19.6
21.1
17
14.3
Front-To-Back Ratio
dB
>28
>28
>30
>28
300
300
270
270
Gain
25
Polarization
Dual pol +/-45°
VSWR
< 1.5:1
Isolation between Ports
dB
3rd Order IMP @ 2 x 43 dBm
dBc
Impedance
Ohms
Maximum Power Input
W
>29
>30
>29
>28
>150
50
500
500
500
300
MECHANICAL SPECIFICATIONS
Lightning Protection
IEC 61000-4-5
Connector Type/Location
(6) 4.3-10 Female + (2) AISG 1xFemale, 1xMale/Bottom
AISG Standard
Dimensions - HxWxD
AISG 2.0 Compliant
mm (in)
2769 x 340 x 200 (109.0 x 13.4 x 7.9)
Weight w/o Mtg Hardware
kg (lb)
35 (77)
Survival/Rated Wind Speed
km/h (mph]
240 (150) / 150 (93.2)
Applied Wind Load Standard
DIN 1055-4
Wind Load @ Rated Wind, Front
N (lbf)
474 (107)
Wind Load @ Rated Wind, Side
N (lbf)
664 (149)
Wind Load @ Rated Wind, Rear
N (lbf)
637 (143)
°C (°F)
-40 to 60 (-40 to 140 )
TESTING AND ENVIRONMENTAL
Operation temperature
MATERIAL
Radome Material/Color
ASA/Light Grey RAL7035
Mounting Hardware Material
Diecasted Aluminum and Stainless Steel
Radiating Element Material
PCB and Brass
Reflector Material
Aluminum
ORDERING INFORMATION
Shipping Weight
APXVBLL26X_43-C-I20B
kg (lb)
REV: A
All information contained in the present datasheet is subject to confirmation at time of ordering
46 (101)
REV DATE: 15.03.2016
www.rfsworld.com
Page 1 of 2
PRODUCT DATASHEET
APXVBLL26X_43-C-I20B
RF X-TREMEŒTriple Band Antenna, 694-960/2x1695-2690MHz, 65deg, 16.5-18.5dBi, 2.6m,
VET, 0-10/2-12deg, 4.3-10 Connectors, Integrated RET & Bias-Tee
Packing Dimensions, HxWxD
mm (in)
2873 x 444 x 413 (113.1 x 17.5 x 16.3)
Mounting Pipe Diameter
mm (in)
60 - 120 (2.36 - 4.72 )
Mounting Hardware Weight
kg (lb)
3.5 (7.7)
Mounting Hardware
APM40-2
Antenna End Plate
External Document Links
Antenna Drawing
Bias-Tee Configuration
Notes
APM40 Series Datasheet
%LDV7HHLQWHJUDWHGRQ/RZ%DQG3RUW APM40 Series Installation Instructions
AISG 2.0 Protocol Compliant
Lightning protected
Manual Overdrive Instructions
Available Configurations
APXVBLL26X_43-C-I20B ² 3UHFRPPLVVLRQHGLQWHJUDWHG$&8VLQFOXGHG%LDV7HHRQ3RUW 38.5 kg, 84.9 lb
APXVBLL26X_43-C-I20B
REV: A
All information contained in the present datasheet is subject to confirmation at time of ordering
REV DATE: 15.03.2016
²Weight
www.rfsworld.com
Page 2 of 2