PRODUCT DATASHEET
AP866516-CT0
Vertical Polarized Antenna, 806-894, 65deg, 17dBi, 1.9m, FET, 0deg
Well adapted for dense urban network
FEATURES / BENEFITS
Co-site interference reduction (F/B ratio, fast horizontal pattern roll-off).
Improved capacity network by reducing co-site hand-off.
Distance between antennas can be reduced thus minimizing visual impact.
Broad bandwidth allows installation on all cellular standards.
2 side-by-side coupled antennas will lead to a 33° horizontal beamwidth for highway coverage.
Easy to install due to only 2 mechanical clamps independent of antenna size.
Suitable for skew angle solution for high diameter site.
Technical Features
ELECTRICAL SPECIFICATIONS
Frequency Range
MHz
806-894
dBi (dBd)
17 (14.9)
Horizontal Beamwidth
deg
65
Vertical Beamwidth
deg
9
Electrical Downtilt Range
deg
0
Front-To-Back Ratio
dB
>30 (Typ.35)
Gain
Polarization
Vertical
VSWR
3rd Order IMP @ 2 x 43 dBm
Impedance
Maximum Power Input
< 1.5:1
dBc
>150
Ohms
50
W
1000
MECHANICAL SPECIFICATIONS
Lightning Protection
Direct Ground
Connector Type/Location
7-16 DIN Female/Back
Dimensions - HxWxD
mm (in)
1977 x 262 x 140 (77.79 x 9.05 x 5.51)
Weight w/o Mtg Hardware
kg (lb)
10.9 (23.98)
Weight w/ Mtg Hardware
kg (lb)
13.7 (30.1)
km/h (mph]
200 (125) / 160 (100)
Wind Load @ Rated Wind, Front
N (lbf)
1017 (228)
Wind Load @ Rated Wind, Max.
N (lbf)
1017 (228)
Wind Load @ Rated Wind, Side
N (lbf)
726 (163)
Wind Load @ Rated Wind, Rear
N (lbf)
996 (223)
°C (°F)
-40 to 60 (-40 to 140 )
Survival/Rated Wind Speed
TESTING AND ENVIRONMENTAL
Operation temperature
MATERIAL
Radome Material/Color
UV Resistant ASA/Light Grey RAL7035
Mounting Hardware Material
Diecasted Aluminum
Radiating Element Material
Aluminum
Reflector Material
Aluminum
ORDERING INFORMATION
Packing Dimensions, HxWxD
mm (in)
2115 x 300 x 220 (83.23 x 11.81 x 8.66)
Mounting Pipe Diameter
mm (in)
60 - 120 (2.36 - 4.72 )
Mounting Hardware Weight
kg (lb)
3.4 (7.5)
Mounting Hardware
AP866516-CT0
APM40-2
REV: A1
All information contained in the present datasheet is subject to confirmation at time of ordering
REV DATE: 05.05.2011
www.rfsworld.com
Page 1 of 2
PRODUCT DATASHEET
AP866516-CT0
Vertical Polarized Antenna, 806-894, 65deg, 17dBi, 1.9m, FET, 0deg
Vertical Pattern
Horizontal Pattern
External Document Links
Notes
APM40 Series Datasheet
For additional mounting information please click "External Document Link" below.
APM40 Series Installation Instructions
AP866516-CT0
REV: A1
All information contained in the present datasheet is subject to confirmation at time of ordering
REV DATE: 05.05.2011
www.rfsworld.com
Page 2 of 2