PRODUCTS GUIDE
Gas Chromatograph
Organic Elemental Analyzer
J-SCIENCE LAB CO.,LTD
Gas Chromatograph , TCD, FID,FPD,Non-Radioactive ECD
✔ GC7100 Series /GC7100TF
Lab
Features
● Improved productivity owing to multi-step heating and blower forced cooling mechanism
equipped as standard
● Simultaneous loadable with TCD and FID notwithstanding compact general-purpose equipment
● More uniform distribution of oven temperatures owing to adoption of the slide type column
oven bottom
● Loadable with non-radiation source type ECD not necessitating legal formalities
● Loadable with detectors of FID, TCD, NPD, FPD and Non-Radioactive ECD
● Usable for capillary column and wide bore column analyses after fitting the capillary column kit
● Usable for applications such as use of the gas sampler, liquid auto sampler and headspace sampler
Specifications
Column oven
R. T.+10 to 400 ℃, Column capacity: 7.78 L,
Heating rate: 0.1 to 99.9 ℃/min
Cooling
9 min (300 ℃ to 50 ℃)
Carrier gas
Control with constant flow valve (or constant
pressure valve) and pressure gauge
Gross weight
Approx. 40 kg
Analysis column
Packed column and capillary column
Overall dimensions Approx.495 (w) X 550 (d) X 440 (h) mm
Injection port
Ghost less injection port
Power requirement AC100 V +/- 10 %, 1.5 kVA
Safety mechanism
Overheat preventive function provided at
required places
Gas Chromatograph, TCD, FID, HN, EN, NPD, FPD (Capillary System)
✔ GC Labostage
Lab
This high-performance gas chromatograph is featured in adoption of an electronic control for
control of carrier gas. This general-purpose equipment of compact size accepts loading of
multiple detectors to meet diversified analysis environmental requirements. Superb in
operability and maintainability, the gas chromatograph can be easily operated by operators
widely ranging frombeginners to skilled operators.
Features
Specifications
● Analyses available widely ranging from capillary column to packed
column analyses
● Multiple detectors loadable to meet diversified analysis
● environmental requirements
Easy setting of conditions on GC or PC
● Non-radiation source type ECD (EN) with no legal formalities
● required loadable
● Detectors: FID, TCD, NPD, FPD and EN
Column oven
Room temp +10 to 400 ℃
Heating Rate
0.1 to 50 ℃/min
Analysis column
Packed column and capillary column
Flow control
0 to 300 mL/min
Dimension
Approx. 550 (w) X 550 (d) X 430 (h) mm
Weight
40 kg
Power requirement
AC100 V, 50/60 Hz, 1.5 kVA
−1−
Gas Chromatograph (Gas Sampling system)
GAS5000
QA/QC
Space saving
Installation is enabled at narrow space as a result of integration of gas chromatograph with
sampling system to minimize required complicated piping and wiring. The system
chromatograph can also be installed separately as required, depending on allowed installation
space or specifications of the analysis system.
Higher operability
D eve lope d w ith imp o rtan c e p lac ed o n imp ro ved o p e r a b ility a n d p r o d u ctiv ity , th e
high-performance system chromatograph featured in superb durability and maintainability
enables inexperienced operators to perform complicated analyses smoothly.
Specifications
GAS5000 System
Main body with sampling unit
Column capacity
7.78 L
Detector
FID, TC-W (2 Set of TCD), T-TCD (Thermistor type TCD)
Carrier gas control
Pressure valve
Sampling System
Auto Sampling Valve, 2 Set
Dimension
570(w) X 500(d) X 420(h)mm
Temperature
Room Temp +10 to 300℃ Ghost less injection port Weight
Sampling
Auto, Manual
Approx. 40 kg
Power requirement AC100 V, 50/60 Hz, 1.5 kVA
GAS1000 Series System Configuration
QA/QC
1. All-in-one type
Impurities measurement system in N2 and air
Detector
FID
Sample introduction port
2 auto sampling valve
Operation
Manual/ Auto by sequencer
Measuring components
CO, CH4 and CH4, C2H2, C2H4, C2H6, C3H8
Others
Anti-inflammation detector, Methane converter
Impurities measurement system in H2 and CO
Detector
TCD-W (2 X TCD)
Sample introduction port
4 manual sampling valves
Operation
Manual
Measuring components
H2, O2, N2, CO2
Others
Pre-amplifier, Reading sample flow path (displays on PC)
CO/CH4 /CO2 measurement system in medical gas and Ar, N2
Detector
T-TCD (thermistor-type), FID
Sample introduction port
2 manual sampling valves
Operation
Manual
sample
Medical gas, O2, N2
Measuring components
Medical gas (N2 in O2 or O2 in N2, etc.), CO, CH4, CO2
Others
Methane converter
−2−
GAS1000 Series System Configuration Cont’d
QA/QC
N2O, CH4 and CO2 measurement system in the atmosphere
Detector
HPID, FID
Sample introduction port
Manual sampling valves
Operation
Manual
Measuring components
N2O, CH4, CO2
Others
Methane converter
Mixing air measurement system in welding nozzle
Detector
TF (TCD, FID)
Sample introduction port
2 manual sampling valves
Operation
Manual/ Auto
Measuring components
O2, N2, CO2
Others
Pre-amplifier, Methane converter, Welding nozzle jet plate
Features
● Space-saving design of integration for GC and sampling unit.
Available for separate type in accordance with special
measurement system.
● It is a small-size of instrument though, wide range of components
analysis is achievable by utilizing simultaneous installation of
2 detectors, such as TCD and FID, etc.
● As it is a small-exclusive instrument with high consideration for
operation and functionality, wide range of system configuration
which satisfies respective analysis needs can be achievable. Even
an untrained operator can comply with complicated analysis
comfortably.
● High accurate measurement is achievable as in the same as
conventional-type instrument. A wide variety of sample
measurement from trace to composition analysis can be attainable.
● In sequencer type, solo auto-operation is achievable and be
utilized as wide range of data processing system.
● In continuous analysis system, daily/monthly reports will be
produced by automatic transferring the quantitative results after
every analysis completion, in combination with JC2000 (PC-type
data processing device).
2. Separate type
Impurities Measurement System in H2
Detector
TF (TCD, FID)
Sample introduction port
2 auto-sampling valves and 2 auto-precut valves
Operation
Manual/ Auto
Measuring components
O2, N2, CO, CH4, CO2, THC
Others
Methane converter, Anti-inflammation detector
Total Sulfur Measurement System in H2
Detector
FPD
Sample introduction port
1 Auto-sampling valve and 1 Auto-precut valve
Operation
Manual/ Auto
Measuring components
Total Sulfur
Others
Concentrating function and Reduction function
− 3−
Impurities Measurement System in respective pure gas
Detector
FID-W (FID x 2)
Sample introduction port
2 manual sampling valves, 2 auto-sampling valves, 2 Auto-precut valves
Operation
Manual/ Auto
Measuring components
N2, Ar, He, O2, Air
Others
Methane converter, Sample flow path reading device
Impurities in ppb level measurement System in H2 He
Detector
TF (TCD, FID)
Sample introduction port
1 auto-sampling valve and 1 auto-precut valve
Operation
Manual/ Auto
Measuring components
O2, N2, CO, CH4, CO2
Others
Pre-Amplifier, Methane converter (with concentration function)
System 2 : N2 in O2
Impurities
Measurement
System
In pure gas
Detector
Sample introduction port 1 Auto-sampling valve and 1 auto precut valve
System 1: H2, THC, CO, CO2, in O2 or N2
Detector
TCD
TF (TCD, FID)
Operation
Manual/ Auto
Measuring components
O2, N2, CO, CH4, CO2
Others
Pre-Amplifier, D/A converter, Sample flow
path reading device
System 3: THC, C2H2 in O2/O2 mixture gas
Sample introduction port 3 Auto-sampling valves
Detector
Operation
Manual/ Auto
Sample
Argon gas
Measuring components
H2, CO, CO2, THC
Others
Methane converter, D/A converter (co-use
with System 3), Anti-inflammation
detector, Sample flow path reading device
FID
Sample introduction port 1 Auto-sampling valve
Operation
Manual/ Auto
Measuring components
THC, C2H2
Others
Anti-inflammation detector, Sample flow
path reading device
■ Data processing device
Data
processing
device
Data
processing
device
JC2000 (PC type)
µ7 (PC type)
Methane converter unit
Windows10 64 bit
Methane converter unit
Windows10 64 bit
Measurement
Area/Height, Half-value
width,Conventional theoretical plates, etc.
Measurement
Area/Height, Half-value
width,Conventional theoretical plates, etc.
Input channel
2 ch (4 ch as option)
Input channel
2 ch(4 ch as option)
Input range
-20 mV to 1 V
Input range
-2.5 V to +2.5 V
Processing peak number Max. 320 peaks
Processing peak number max. 1000 peaks
Option accessory
Flame detection device
GFA-201
Data Processing Device
JSμ7 (PC type)
D/A Converter
DAC-201 series
Air Filtration Device
APF-201
TCD Pre-Amplifier
GPA-201
Channel Selector
CHS-201, for 2ch exchange
CHS-202, for 4ch exchange
− 4−
Automatic Fuel Gas Analyzer
GC-2011
QA/QC
All kinds of fuel gases can be automatically analyzed with high accuracy.
Analysis available of 18 components ranging from H2 to C6 up; H2, O2, N2, CH4, CO, CO2, C2H4, C2H6, C3H4, Analysis of H2 to C5 available in
15 min only; Analysis time shortened with 3 pieces of TCD detectors and original column system.
Automatic analysis without troublesome manual operations required; Automatic execution of analysis up to printout of a report simply
with analysis started with sample gas flow.
Specifications
Column oven
Fixed at 50 ℃
Detector
TCD X 3 set
Gross weight
Approx. 60 kg (Main body only)
Overall dimensions
Approx. 580(w) x540(d) x430(h)(mm)
Power requirement
AC100 V +/- 10 %, 1.2 kVA
Hydrogen in Steel Measuring System
✔ JTF-20A
Lab
QA/QC
This system measures hydrogen in steel, the causative agent of delayed fracture,according to the
thermal desorption method in use of the gas chromatograph.
The system takes continuous batch measurements of hydrogen, verifies behavior of hydrogen to
be discharged with temperature change, and displays data such as the temperature-amount of
discharged hydrogen in a measurement result list and in a graph to t hereby verify behavior of
hydrogen.
Features
● Trace hydrogen component measurable with the gas chromatograph.
Optional setting available of sample temperature programming rate
and temperature range.
● Data of “Temperature-Hydrogen evolution rate” displayed
graphically and in a list.
● Tubular furnace of opening and closing type featured in simple
operations.
● Perfect safety measures established due to adoption of
over-temperature protection system.
● Components other than hydrogen measurable as well (optional).
Diffusible Hydrogen Analyzer
✔ GC206
Analyzer of diffusible hydrogen
Specifications
Gas chromatograph
GAS1000T
Detector
TCD (with preamplifier)
Auto gas sampler
GAS-300 series product
Tubular furnace
GTF20A series product
Data processing unit With calculation software
Gross weight
Approx. 180 kg
Overall dimensions
Approx. 1200(w) x1000(d) x1500(h)mm
(excluded computer)
Power requirement
AC100 V +/- 10 %, 3.0 kVA
Pyrolysis and hydrogen Addition unit
Methane converter
GPY-201
CH4-203
High polymar pyrolysis GC And hydrogen
addition unit
−5−
High sensitivity measurement of CO, CO2
etc., through methane converter
Oil in Liquid CO2 measuring System
✔ GAL202
QA/QC
As to carbon dioxide as a food additive, oil (high-boiling point lubricating oil
and others) is the object of measurement as well as inorganic gas
components such as H 2 , O 2 , N 2 , sulfur compounds and hydrocarbon
components. Out of them, oil had been conventionally measured according
to the IR method after absorption in carbon tetrachloride. However, carbon
tetrachloride could not be used as a result of enforcement of control of CFC.
It was thus the problem with the IR method that long time is inevitable including pretreatment. This system performs full automatic
operations of all processes, ranging from sample enrichment to FID measurement in adoption of the gas chromatograph method.
Features
This system is an item with utility model acquired
(expiration of validity) featured in unique method
of measurement not seen with products of other
companies. As a result of establishment of full
automatic operations, drastic labor saving and
cost reduction have been attained as well as
considerable improvement productivity in quality
management activities.
Gas chromatograph
GC7100FID ｗith temperature programming function
Detector
FID
Auto heat-reserving gas sampler
With enrichment mechanism
Data processing unit
With calculation software
Gross weight
Approx. 120 kg
Overall dimensions
Approx. 1500(w)x 800(d)x 600(h) mm
Power requirement
AC100 V +/- 10 %, 4.0 kVA
Automatic GC Series
AG-2 Series
QA/QC
Features
●
With simultaneous fitting of max. 3 units of detectors and 4 lines of column systems, these gas
chromatographs enable analysis of all components of diversified sample gases mixed with
inorganic gas and organic substance.
● Microanalysis available from ppb level to sub ppm level.
● These gas chromatographs can be used for analysis of wet state gas containing much moisture.
Specifications
Measuring component
H2
O2, N2
CH4, CO
CO2
C2H4,C2H6,C3H6, C3H8,i&n-C4H10
Detector
TCD1
TCD2
FID
FID
FID
Carrier gas
Ar (N2)
He
He
He
He
General purpose
2 ppm
2 ppm
0.05 ppm
0.05 ppm
0.05 ppm
High speed
20 ppm
20 ppm
0.5 ppm
0.5 ppm
0.5 ppm
Min. detection sensitivity
Trace Gas Analyzer
Trace Nitrogen Analyzer
Compact Trace Nitrogen Analyzer
TGA-201
PES-1200
PES-050
ppb-level CO, CH 4 and CO 2 measurement
with simple enrichment mechanism.
This trace nitrogen analyzer is intended for
measuring continuously the concentration of
a trace of nitrogen gas contained in
high-purity argon gas, which is detected by
an emission spectrometric method.
Measuring range 0 to 5, 0 to 10 ppm
−6−
This trace nitrogen analyzer, not requiring
pretreatment, can have a direct sample
introduction to monitor continuously the
concentration of nitrogen, impurity in argon.
It is not required carrier gas for such as gas
chromatography, and saves a running costs.
Measuring range 0.5 ppm to 50 ppm
Offensive Odor Sample automatic measuring system
✔ GBA-201
Lab
Features
● Comply with the Offensive Odor Control Law.
● Sample is an automatic concentration by cold trap method with liquid oxygen or
liquid argon.
● The sample is introduced into Gas Chromatograph.
Specifications
Sample Introduction
Auto 6-way sampling valve
Flow path switching
3-way Solenoid valve
Switching flow path
Auto 4-way switching valve
Valve control
Pneumatic
Concentration glass tube 4 mmφ x 300 mm, Heater
Operation
Auto/ Manual, Setting up by touch panel
Mass flow meter
Sample gas flow, Accumulated amount
(max. 200 mL/min.)
Sequence
Sequence controller
Constant flow valve
Purge gas
Overall dimensions
Approx. 400(w)×460(d)×430(h) +
200(w)×300(d)×470(h)mm
Suction pump
Diaphragm pump
Power requirement
AC100 V 1.5 kVA
Measurement
component
Sampling device
Auto-concentration
device
Introduction device
Measurement
Ammonia
Boric acid solution collection GBO-101A
n/a
n/a
UV
Sulfur compound
Direct sampling - GBO-101A
Suction case - GBO-101A
GBA-201
GBA-201
GC (FPD)
trimethylamine
Collection by Sulfuric acid solution
GBO-101A
GBA-201
GBA-201
GC (FID)
aldehyde genera
Sampling bag
GBO-101A
GBA-201
cationic resin
micro syringe
GC (NPD)
organic solvent
Direct sampling - GBO-101A
Suction case - GBO-101A
GBA-201
GBA-201
GC (FID)
lower fatty acid
Collection by alkali beads
GBO-101A
n/a
GBO-501
GC (FID)
Offensive Odor Sample Pretreatment Device
Sampling device
GBO-101A, GBO-201A
■ Collection of ammonia
and trimethylamine (TMA)
GBP-101A
Lab
Gas Sampling device
GBP-101A
with accessory
Dimension: 145(w) x 310)d) x 370(h)mm
Weight: 14 kg
Power requirement: AC100/200 V or DC12 V
Integrating flowmeter
Option
Gas Sampling device
GBO-101A
with accessory
Dimension: 145(w) x 310)d) x 370(h)mm
Weight: 14 kg
Power requirement: AC100/200 V or DC12 V
Gas Sampling device
GBO-101A
with accessory
Dimension: 145(w) x 310)d) x 370(h)mm
Weight: 14 kg
Power requirement: AC100/200 V or DC12 V
Integrating flowmeter
GBO-201A
Gas Sampling device
GBO-101A
with accessory
Dimension: 145(w) x 310)d) x 370(h)mm
Weight: 14 kg
Power requirement: AC100/200 V or DC12 V
Integrating flowmeter
Option
Option
■ Direct collection using
sampling bag.
Sulfur compound,
Aldehyde genera and
Organic solvent
■ Collection of sulfur compounds
and organic solvents
using suction case
GBO-101A
GBO-201A GBO-101A
■ Collection of lower fatty acid
using alkali beads
GBP-101A
Option
−7−
LPG Analyzer
GC205
QA/QC
LPG (liquefied petroleum gas) consists of a liquid phase portion and a gas phase
portion. LPG is measured with the gas chromatograph with its liquid phase portion
sampled and evaporated.
✔ Features
With a liquid sample vaporizer attached, the analyzer enables analysis of the liquid
phase portion through simple operations.
Specifications
Gas Chromatograph
GAS 1000T
Gross weight
Approx. 50 kg
Manual gas sampler
GSL-800M series
Overall dimensions
Approx. 1200(w) x800(d) x600(h)mm
Liquid sampling unit
LSV-202
Power requirement
AC100 V +/- 10 %, 1.25 kVA
Data processing unit
JSμ7 (PC type)
EOG Densitometer
✔ GC216
QA/QC
Accurate measuring of ethylene oxide concentration and relative humidity in the
sterilization chamber.
Specifications
Measuring range
0 to 30 vol%
Surrounding temperature 10 to 40 ℃
Temp. variation should
be less than +/- 3 %
Repeatability
Less than +/- 5 %FS
Recorder output
DC 0 to 1 V
Stability
Both zero and span less than +/- 5 %FS
Power source
AC100 V +/- 10%, 50/60 Hz 1.0 kVA
Response speed
Within 1 min. (90 % response)
Dimensions
392 (w) x318 (d) x199 (h)mm
Sampling volume
Less than 1 L/min.
Weight
Approx. 10 kg
Warming up
Within 180 min.
Measuring method T-TCD
Medical Gas Analyzer
✔ GC202A / GC202
QA/QC
Features
The analyzer enables analysis of the medical gas portion through simple
operations.
Specifications
Column oven Temp. 50 ℃
Sample
Medical oxygen and Medical nitrogen
Detector
Thermistor type TCD
Measuring object
Nitrogen and Oxygen
Analysis column
MS-5A, 3 m
Range (Min. detection sensitivity 0.05 %
Sample introduction Manual 8-way sampling valve (GC202）
Automatic 8-way sampling valve(GC202A)
Operations
Manual (GC202), and automatic (GC202A)*
Gross weight
Approx. 20 kg
Repeatability
+/- 2 %
Gas chromatograph GC202/ GC202A
Components Data processor
Air compressor
Overall dimensions Approx. 450(w)x505(d)x225(h)mm (GC202A)
Power requirement AC100 V +/- 10 % 300 VA
−8−
JSμ7 (PC type)
For valve drive (GC202A)
MICRO CORDER
The Micro Corder JM11 is an organic trace element analysis system based on the Pregl-Dumas method to simultaneously determine
3 elements of carbon, hydrogen and nitrogen through computer control.
Compared with conventional models, skillful analytical technique is no more required. Superb accuracy of analysis is obtained with simple
operations of direct weighing of a sample onto the boat and its introduction into the combustion unit only. As a result of introduction of the
most advanced technology of electronics, stability, operability and economization of the analyzer have been drastically improved.
Micro Corder (Analyzer to Determine Carbon, Hydrogen and Nitrogen Simultaneously)
JM11
Application
◆ Analysis for quality control of medicine and chemical industrial products
◆ Analysis of fuels such as oil, kerosene, fuel oil, coal and coke
◆ Analysis of soils, sludge, sewage treatment excess mud, etc.
◆ Analysis of atmospheric pollutants in vehicle exhaust emissions such as
particulates, and analysis of organic carbon and inorganic carbon
◆ Analysis of raw materials and products of food
JM11
S-Book
Specifications
Measuring element Carbon, Hydrogen, Nitrogen
Option(Sulfur,Oxygen)
Warm up time
Autosampler
Analyzing start-up possible in 90
minutes after power on
Measuring method Self- integration (using dual piston pump) Carrier gas
Helium (99.99 %up)
Measuring accuracy Absolute error within ±0.3 %
Combustion gas
High purity Oxygen (99.99 %up)
Hydrogen
1 to 400 μg
Carbon
3 to 2600 μg
Nitrogen
1 to 1000 μg
(The above value is in case of standard
analysis condition.
There is possibility of extending
upper/lower limit of range by varying the
analysis condition.)
Combustion method
Helium and Oxygen mixing method
Standard temperature setting
CHN analysis
Sample furnace
1000 ℃
Combustion furnace 800 ℃
Reduction furnace
600 ℃
Temperature setting from CPU
11 minutes
JM11 Dimensions, weight
600(w) x 600(d) x 500(h)mm , 75 kg
Measuring range
Analysis time
JMA-11, Autosampler Dimensions, weight 400(w)x600(d)x500(h)mm , 45 kg
Sample weigh
2~10 mg, Approximately 2 mg of sample weighed by micro-balance. (capable of analyzing other samples than
organic substance, such as soil, catalyst, etc. In these cases, maximum weight of sample is 1 g, ultra-micro analysis
can be achieved by using ultra-micro balance)
MACRO CORDER
Carbon and Nitrogen Simultaneous Determination Unit
JM1000CN TOC-TN
Application
◆ Agriculture: Analysis of carbon and nitrogen in soils and crops.
◆ Livestock: Analysis of crude protein in raw materials and mixed fertilizers.
◆ Analysis of carbon and nitrogen in fertilizers.
◆ Food: Analysis for quality control of raw materials and products.
Fuel: Analysis of fuels such as oil and coal.
◆ Chemical industry: Analysis of high molecular compounds, dyestuff, petrochemicals, etc.
Environment: analysis of carbon and nitrogen in sludge and earth and sand on river bottom and sea bed; analysis of carbon, nitrogen in
industrial waste Pharmaceutical and clinical analyses.
Specifications
Measuring element
Carbon, Nitrogen
Measuring method
Self-integration method (Piston pump is used)
Analysis time
9 to 10 minutes
Measuring accuracy Absolute error +/- 0.3 % max.
Sample weight
Organic matter Max. 500 mg, Inorganic max 1 g
Measuring range
Carbon 0.2 to 125 mg
Nitrogen 0.02 to 12 mg
(The measuring range is for the case of
analysis on standard conditions. The range
can be extended through change of analysis
conditions.)
Detector
Thermal Conductivity Detector
Tungsten filament 60 Ω, 4 channel
Detector oven
100 ℃
Pump oven
55 ℃
Power requirement
AC100 V +/-10 % 50/60 Hz, 4 kVA
JM1000
Dimensions, weight
760(w)x585(d)x485(h)mm,90 kg
JMA-1000, Autosampler
Dimensions, weight
900(w)x590(d)x470(h)mm,40 kg
−9−
Plasma Asher
JPA301
● This device can ash samples using oxygen plasma.
● The feature of this device is that it can ash various samples at lower temperature than the
electric furnace.
● The ashing losses are minimal when using plasma ashing for pretreatment of asbestos or
volatile samples.
● This device conforms to *JIS K 3850-1.
*Determination of airborne fibrous particles
-Part 1 : Optical microscopy method and scanning electron microscopy method
Applicable to Refracted Ceramic Fiber standard measurement method (PCM method)
(Ministry of Health, Labor and Welfare)
● The function of auto tuning against load fluctuation in the reaction chamber prevents the
loss of plasma.
● Automatic ashing program operation controls from start to release to the atmosphere.
● We offer 2 or 3 shelves for processing multiple samples.
Application
Specifications
◆ Pre-treatment of asbestos
◆ Ashing of high concentration organic matter
◆ Simultaneous ashing of multiple specimens
◆ Surface treatment / surface modification treatment
◆ Etching of electronic parts
◆ Ashing of biological samples
Frequency
13.56 MHz
Chamber size
Cylindrical I.D. 153, O.D 160,L:315 mm
Output
30 to 300 watts
Processing gas
Oxygen
Purge gas
Indoor air
Dimansions
420(w)×570(d)×H465(h) mm
Weight
Approx. 40 kg
Power supply
AC 100 V 50/60 Hz 1.5 kVA
(included Vacuum pump)
High-purity Hydrogen Generator
RHG-200/300/500/700/1000
Features
The high-purity hydrogen generator is designed to generate, through electrolysis
of water, hydrogen to be used by the gas chromatographs equipped with a flame
ionization detector (FID) or flame photometric detector (FPD), as well as by
hydrocarbon analyzers.
Specifications
Type
RHG-200
Purity
Flow Meter
OUT with Tank
RHG-300
RHG-500
RHG-700
RHG-1000
H2 99.999 %up, 250 kPa(The value does not include moisture)
100 mL/min
300 mL/min
500 mL/min
700 mL/min
1,000 mL/min
2L
5L
10 L
10 L
10 L
Pure Water
Ion Exchange Water, less than 1μ S
Power Requation
AC100 V (other voltages available), 50/60 Hz
Dimansions (mm)
130(w)×400(d)×250(h) 140(w)×400(d)×370(h) 250(w)×400(d)×380(h) 280(w)×640(d)×520(h) 280(w)×640(d)×520(h)
Weight
11 kg
14 kg
20 kg
Warming-up Time
Approx. 5 min.
− 10 −
25 kg
26 kg
For the Customer
J-SCIENCE LAB CO.,LTD
Address : 3-1, Hiuchigata-cho, Kamitoba,Minami-ku, Kyoto 601-8144 JAPAN
Phone : +81 (0)75 693 9480
Fax
: +81 (0)75 694 9490
URL
: http://www.j-sl.com
Inquiry : mailbox@j-sl.com
Company profile
J- SCIENCE LAB was established in May 30, 2001 by mature engineers of Gas Chromatography and Organic Elemental
analysis.We have been launching various unique products since 2001. And also we can propose various System-GC to
meet the individual requirement.We shall continue strive to develop new analysis devices by making full use of advanced
technology, to contribute to science technology and the society.
Ver.1.1