4/25/24, 10:09 AM ECU Key 660 ECU Key ECU Key Write Procedure 1. Connect the HDS to the data link connector (DLC). 2. Select the ECU Key Writing application from the home menu of the HDS and follow the screen prompts to write the ECU Key. NOTE: You must turn the vehicle to the OFF (LOCK) mode, wait for 5 minutes, then back to the ON mode after the completing the writing process (successful or failed (error)). Failure to do so will permanently damage the control unit. After writing the ECU Key, the control unit related with the ECU Key may trigger a DTC. Therefore, perform an all DTC check and clear any DTC if necessary. Refer to available online service information for detail information and how to use the ECU Key Writing application. EKM (ECU Key Management) System As driving support system is being enhanced and shifting to automated driving, vehicles are connected to many devices and networks in order to obtain various information such as location information and traffic information. While the necessary information can be obtained, there is also a danger that incorrect information will be sent to the vehicle's ECU system. Memory Cloud Camera Signal Ant for DSRC Smart Phone Beacon Bring in GPS Telematics e-call V2I*1 FM multi broadcast Wi-Fi 3G/LTE VICS V2V*2 ECU ECU ECU V2X*3 Vehicle network G/W ECU ECU Vehicle network ECU ECU *1: Vehicle to Infrastructure *2: Vehicle to Vehicle *3: Vehicle to Everything For this reason, some ECU systems adopt ECU Keys for the purpose of strengthening security, based on a multiplexed monitoring system on the network. When replacing certain ECUs of a vehicle equipped with an ECU Key, an ECU Key writing process is necessary in addition to the normal replacement process. If writing is not performed after replacing an ECU, there is no effect on the basic driving operation of the vehicle, but the driving support function may be affected. In addition, if the ECU Key has not been written or is inconsistent, a DTC will be detected and a warning indicator will come on or blink. https://www.in.honda.com/rjanisis/pubs/app/hm/serv-info.html?package=6130B&lang=enu&sie=G000660_enu&vin= 1/2 4/25/24, 10:09 AM ECU Key 660 ECU replacement process of conventional vehicles ECU replacement Repair verification by HDS ECU replacement process of vehicles equipped with ECU Keys (for target ECU) ECU replacement ECU Key writing Repair verification by HDS An online environment is required for writing ECU Keys because communication with an external ECU Key management (EKM) system is required. ECU KEY WRITE EKM system https://www.in.honda.com/rjanisis/pubs/app/hm/serv-info.html?package=6130B&lang=enu&sie=G000660_enu&vin= 2/2