6.TROUBLESHOOTING B–61395E/06 6.16 Amplifier or overheat of motor is detected. ALARM 400, 402, 406, 490 (OVERLOAD) Points 400 SERVO ALM :X OVERLOAD ⇐ Example of CRT display. Axis name is also displayed. Confirm the detail by the diagnostic function of CNC. DGN DGN 0720 #7 OVL : 0727 OVL #6 #5 #4 #3 #2 #1 : #7(OVL): 1 OVERLOAD ALARM is displayed. Overheat of servo motor (START) NO Is it hot ? YES Overheat of motor Defective thermostat (Next page) (1) 223 NOTE : After the motor is changed, reference position or machine’s reference point is different from the one before replace ment. Set it again. #0