DUSTY PROJECTS
WORKFLOW
D-00
START
D-04
D-03
D-01
IS THERE A
CLIENT
CHECKLIST?
PROJECT
INFORMATION
SET-UP PROJECT FOLDER AT
BIM360 AND FOLLOW "4-FILE
NAMING & FOLDER
STRUCTURE" DETAILS
D-05
D-08
ARE THERE
CAD FILES
PROVIDED?
YES
YES
D-09
CREATE FILE PER FLOOR AT BIM360
FROM DUSTY.DWG TEMPLATE AND
REFER TO DOC #4 FOR FILE NAMING
STANDARDS
D-10
UPLOAD ALL REQUIRED FILES
& DOCUMENTS TO
DESIGNATED FILE LOCATIONS
(DATED)
ADD ANNOTATION BEFORE
EXPORT
YES
NO
DustyProject1-L01-DW.dwg
NO
F4
D-02
·
·
·
·
·
Note: To Finalize location of dusty file
template
D-06
PROVIDE CHECKLIST
FORM TO FILL PROJECT
INFORMATION
Note: when exporting from Revit, export
2D CAD of floor plan, RCP, & all detail
sheets
ARE THERE
REVIT FILES
PROVIDED?
·
·
·
·
·
REVIT FILES
CAD FILES
PDFs
MARK-UPS
DETAIL SHEETS
ROOM NO.
DOOR NAME & TYPE
WALL TYPE
CEILING ELEVATION
FEC
F4
F4
F4
NO
D-07
REQUEST FOR CAD OR
REVIT FILES
D-11
EXPORT DWG FILE OF THE DESIRED FLOOR FROM RVT FILE
START
D-13
D-14
D-15
D-12
OPEN THE REVIT FILE AND
NAVIGATE TO FLOOR & VIEW
DESIRED
D-16
PERFORM CAD BACKGROUND
CLEANUP
NAVIGATE TO FILE-> EXPORT ->
CAD FORMATS -> DWG
COPY AND SAVE THE
CLEANED-UP FLOOR TO CAD
FILE CREATED AT BIM360
CHECK DIMENSIONS IF
MATCH ON FRAMING
CHECKLIST
DIMENSION ALL WALLS &
ALL SHEET ROCK
D-17
CREATE DOOR ROUGH
OPENINGS
CREATE WALLS
F7
UNDER LAYERS TAB AND
EXPORT LAYER OPTION
SELECT "EXPORT ALL
PROPERTIES BY LAYER,BUT DO
NOT EXPORT OVERRIDES"
IN THE POP-UP WINDOW
SELECT THE 3 DOTS "..."
UNDER SELECT EXPORT SETUP
SELECT UNITS & COORDINATES
TAB AND MAKE SURE THE DWG
UNIT IS IN INCH AND SHARED
COORDINATES IS SELECTED
AND CLICK OK AND NEXT
SAVE THE FILE AT THE
LOCATION FOR EXPORTED
FILES
SAVE THE FILE AT THE
LOCATION FOR EXPORTED
FILES
END
FILE LOCATION:
01_DUSTY ROBOTICS
YY01X_DUSTY PROJECT1
01_SUBMITTALS
B_MODELS
02_EXPORTED CAD
F7
D-18
D-19
D-20
D-21
D-22
D-23
D-24
D-99
CREATE SOFFIT / CEILING
LINES
CREATE FIRE
EXTINGUISHER CABINETS
ADJUST ROUGH OPENINGS
FOR BATH TUB AND
SHOWER
CREATE ROOM NAME /
NUMBERS
CREATE WINDOW ROUGH
OPENINGS
CREATE CONTROL JOINT
CREATE COLUMNS / SLAB
EDGE
END