PV Elite 2019 SP1 Licensee: SPLM Licensed User
FileName : Air Tank 30 m3
-------------------------------Vessel Design Summary:
Step:
12
9:31am Jan 10,2024
ASME Code, Section VIII Division 1, 2017
Diameter Spec : 2800.000 mm. ID
Vessel Design Length, Tangent to Tangent
4401.60
mm.
Specified Datum Line Distance
-63.50
mm.
Internal Design Temperature
Internal Design Pressure
50
10.500
�C
bars
External Design Temperature
0
Maximum Allowable Working Pressure
Hydrostatic Test Pressure
Required Minimum Design Metal Temperature
Warmest Computed Minimum Design Metal Temperature
Wind Design Code
Earthquake Design Code
10.761
13.650
-28.9
-29.0
�C
bars
bars
�C
�C
ASCE-93
UBC-94
Materials of Construction:
Component |
|
|
|
|Normal | Impact |
Type |
Material | Class |
Thickness |
UNS # | ized | Tested |
---------------------------------------------------------------------------------------------Shell |
SA-516 70 |
... |
... | K02700 |
No |
No |
Head |
SA-516 70 |
... |
... | K02700 |
No |
No |
Hrz Bolting |
SA-193 B7 |
... |
2 1/2 < t <= 4 | G41400 |
No |
No |
Normalized is determined based on the UCS-66 material curve selection and Figure UCS-66.
Impact Tested is based on material selection and material data properties.
Element Pressures and MAWP (bars & mm.):
|
Design |
|
|
| Str. |
In |
Element Description |
Pressure |
Ext. |
Element |
Corrosion | Flg. | Creep |
or Type | + Stat. head | Press. |
M.A.W.P |
Allowance | Gov. | Range |
-------------------------------------------------------------------------------------------Ellipse |
10.500 |
0.00 |
10.833 |
3.0000 |
No |
No |
Cylinder |
10.500 |
0.00 |
10.761 |
3.0000 | N/A |
No |
Ellipse |
10.500 |
0.00 |
10.833 |
3.0000 |
No |
No |
Element Types and Properties:
Element |"To" Elev | Element | Nominal | Finished | Reqd Thk | Reqd Thk |
Long |
Circ |
|
|
Length |Thickness |Thickness | Internal | External |
Eff |
Eff |
Type |
mm. |
mm. |
mm. |
mm. |
mm. |
mm. |
|
|
-----------------------------------------------------------------------------------------------Ellipse |
114.3 |
50.8 |
16.0 |
14.0 |
13.7 |
4.5 |
1.00 |
1.00 |
Cylinder |
4414.3 |
4300.0 |
14.0 |
14.0 |
13.7 |
... |
1.00 |
1.00 |
Ellipse |
4465.1 |
50.8 |
16.0 |
14.0 |
13.7 |
4.5 |
1.00 |
1.00 |
Saddle Parameters:
Saddle Width
Saddle Bearing Angle
Centerline Dimension
Wear Pad Width
Wear Pad Thickness
Wear Pad Bearing Angle
Distance from Saddle to Tangent
Note: The Wind and Seismic loads were not load factored in this analysis.
204.000
120.000
2250.000
306.000
10.000
132.000
802.000
mm.
deg.
mm.
mm.
mm.
deg.
mm.
1
PV Elite 2019 SP1 Licensee: SPLM Licensed User
FileName : Air Tank 30 m3
-------------------------------Vessel Design Summary:
Step:
12
9:31am Jan 10,2024
Summary of Maximum Saddle Loads, Hydrotest Case :
Maximum Vertical Saddle Load
Maximum Transverse Saddle Shear Load
Maximum Longitudinal Saddle Shear Load
Weights:
Fabricated
Shop Test
Shipping
Erected
Empty
Operating
Field Test
-
Bare W/O Removable Internals
Fabricated + Water ( Full )
Fab. + Rem. Intls.+ Shipping App.
Fab. + Rem. Intls.+ Insul. (etc)
Fab. + Intls. + Details + Wghts.
Empty + Operating Liquid (No CA)
Empty Weight + Water (Full)
21375.06
98.69
122.01
Kgf
Kgf
Kgf
6745.7
39581.5
6745.7
6745.7
6745.7
6745.7
39581.5
kg.
kg.
kg.
kg.
kg.
kg.
kg.
PV Elite is a trademark of Intergraph CADWorx & Analysis Solutions, Inc. 2019
2