Graphic tool selection woodWOP 4.7.3 If the tool database (part of the NC-generator installation) is installed on the computer that is running woodWOP, the tool number can be selected from the list of available tools. 1 The following information is provided in the tool selection: 1 2 3 4 5 6 7 8 8.2 List of all tools entered in the tool database that have the selected code Short description of tool Selected tool number Tool code: This list contains only those tools which have one of these codes. Only the tools which are present on the machine will be listed Graphic of the tool: A bitmap file will be shown for the graphic display of the tool. Display of rotational direction of the tool Marking Green: Tool in tool memory Red: Tool not on machine 9-082-47-3974 2 8 3 4 5 6 7 T:\9082\473974\d00101td.pcx enu13.DOC 1/2 Graphic tool selection woodWOP 4.7.3 Selection of graphic file 6: It will first be investigated whether a file exists in the .../TLG directory with the name <tool number>.bmp (examples: 101.bmp, 156.bmp,...). If this file is not found, the file K<tool code>.bmp will be sought based on the tool code (examples: K1.bmp, K56.bmp,...). If separate graphics for illustration are desired (e.g. digital photos or tool profile drawings), separate bitmap files can be copied into the TLG directory with the name <tool number>.bmp. Note: The list of tool codes can also be supplemented and the template value overwritten. 8.2 9-082-47-3974 enu13.DOC 2/2