URL https://thephoenixcontrols.com/product/ds200tcpdg2b-power-distribution-module-un/
y | Repair |
E
—-----------------------------------------------------------------------------------------Specifications
Manufacturer: General Electric
MPN: DS200TCPDG2B
Product Type: Power Distribution Module
Series: Mark V
Description:
●
●
●
●
●
●
●
●
●
●
●
●
DS200TCPDG2B is a power distribution circuit board Manufactured By General
Electric under Mark V Series.
This is mainly used in Gas Turbine Control Systems.
Eight toggle switches, 36 fuses, and four signal wire connections are included in this
circuit board.
DS200TCPDG2B also has 36 OK LEDs and a 10-pin connector.
This Distribution Module Produces 125 VDC power.
Choosing which signal wires to connect to the terminals is not necessary in order to
replace the board.
DS200TCPDG2B only requires that the installer connect the same wires to the
identical terminals on the replacement board.
First, look at the signal wire terminals; you'll see that each terminal has an ID.
AC1N, AC1H, AC2N, and AC2H are the IDs.
Each wire should be marked with the terminal ID that it is connected to. Use a tag
that will be difficult to remove off the wire.
A screw holds the wires in the terminal to keep them there. . To remove the screw
and release the signal wire, use a screwdriver.
Repeat this procedure for each signal wire that is connected to a terminal. Open the
terminals by loosening the screws before installing the signal wires.
Place the wires in place, then tighten the screws. To make sure the signal wire is
secure, give it a light tug.
The Phoenix Controls has the best prices on unused and refurbished DS200TCPDG2B GE
Mark V power distribution circuit boards. Check out our GE Speedtronic, GE Excitation, GE
LCI, Woodward, and Bently Nevada Spare Parts Inventory online or contact us at
sales@thephoenixcontrols.com for a quote.