Dyna-Cab Installation Guide
This document describes the installation of Dyna-Cabs into the Axe-Fx III.
Steps:
1. Ensure that Fractal-Bot is the latest version. Fractal-Bot can be downloaded from our website:
https://www.fractalaudio.com/fractal-bot/
2. Extract the firmware and Dyna-Cab .syx files from the zip archive.
3. Launch Fractal-Bot.
4. Install the firmware first using the firmware image extracted in Step 2 following the instructions
in the Firmware Update Guide.
5. After rebooting you may see a warning that the Dyna-Cab data is not installed or the wrong
version. If so, press Exit.
6. Install the Dyna-Cab data using the data image extracted in Step 2. Drag-and-drop the .syx file
onto Fractal-Bot as you would a firmware image. Send the data. Reboot when instructed.