Common Tools and Equipment for Computer System Servicing 1. Long nose pliers – used for holding, bending and stretching the lead of electronics component or connecting wire. 2. Side cutter pliers- used for cutting copper, brass, iron, aluminum and steel wires. 3. Flat Screw Driver - used to drive or fasten negative slotted screws. 4. Philips Screw Driver- is used to drive or fasten positive slotted screws 5. Soldering Iron - is used to join two or more metal conductors with the support of soldering lead melted around it. 6. Soldering stand- This is a simple soldering iron stand composed of a heavy-duty metal base and a reinforced spring holder. . 7. Soldering Lead - is a fusible metal alloy used to join together metal work pieces. 8. Soldering Flux- allows you to provide a clean soldered. 9. Crimping Tools - Used in telephone and network cables. Occasionally they are used for serial network connections. 10. Wire Stripper - is a small, hand-held device used to strip the electrical insulation from electric wires. 13. Precision Tools - Is a multi-function tool kit used to loose and tight different kind of screws. 14. Anti-static wrist strap- used to safely ground a person working on very sensitive electronic equipment, to prevent the buildup of static electricity on their body, which can result in electrostatic discharge (ESD) Equipment 11. Tweezers - are tools used to manipulate small parts. 12. Brush - a tool with bristles, wire or other filaments, used for cleaning. 1. Multi-tester - Used to test the integrity of circuits and the quality of electricity in computer components. 2. LAN Tester –designed to test most network cable wiring.