Uploaded by ricardonunes76

S70A Catalog Brazil

advertisement
Ground Support Equipment
2011 Reference Guide – S70A
Multimeter, Digital
27AN
GSE-001
Benefits:
• Ruggedized Multimeter
Product Description:
Used to troubleshoot and aid in the repair of
aircraft electrical systems.
Calibration: Yes
Kit Includes:
 Three probes
 1 Multimeter
 2 gator clips (1 red, 1 black)
Pump Inflating, Manual
700PMP
GSE-002
Benefits:
• The Fluke 700PMP is a
hand-operated pressure
pump to provide
pressures up to 150
psi/1000 kPa
• Multi-turn venire for fine
adjustment of pressure
Product Description:
The 700PMP is a tube type, cylindrical shaped
hand pump with a “T” handle at the compressor
end.
Calibration: Yes
Insulation Test Set
MODEL 3765
GSE-003
Benefits:
• Simplified interface
• Latest in technology and
safety features
Product Description:
The 3765 is a 5KVAC and 6 KVDC Hipot tester.
It can be used as a bench top instrument, or
controlled through entry level automation.
Calibration: Yes
RF Termaline Dummy Load
8135
GSE-004
Product Description:
Rated at 150 Watts continuous with an
impedance of 50 Ohms.
Calibration: No
Work Sta Gnd Kit, Portable
8501
GSE-005
Benefits:
• Prevents ESD damage to
sensitive components
Product Description:
Used to ground personnel while working on
sensitive electronics.
Calibration: No
Rubber Mallet
25714
GSE-006
Product Description:
Used to cause shock to components without
damaging them.
Calibration: No
Low Resistance Ohmmeter
247000
GSE-007
Benefits:
• Simple
• Practical
• reliable
• Digital readout
Product Description:
Used to measure continuity.
Calibration: Yes
Pneumatic Sealant Gun
250065
GSE-008
Benefits:
• Durable
• Works in tight spaces
• Lightweight
Product Description:
Used to apply pro-seal in a controlled manner
over large areas.
Calibration:
Fluorescent Penetrant Inspection Kit
600047
GSE-009
Benefits:
• ZB-100F fan cooled
backlight stays cool to the
touch for improved safety and
operator comfort.
Product Description:
Used to inspect components for small cracks and
defects.
Calibration: No
Spindle Bender Kit
1006748
GSE-010
Benefits:
• Includes pelican case
Product Description:
Used for leverage to help move spindle assy.
Calibration: No
Star Plate Kit:
1006779
GSE-011
Benefits:
• Weather proof case
• Durable design
• Color coded for easy
reference
• Lightweight
Product Description:
The 1006779 Star Plate Kit is a color coded reference tool which,
when utilized, assists in maintaining the location of hardware
while performing maintenance on the S70I Tail Rotor.
Calibration Required: No
Kit Includes:
 Pelican style storage/carrying case
 Star plate assembly as shown above.
GAS MONITOR
009-3001-01N
GSE-012
Benefits:
• Can be used as a personal
monitor, a hand held sniffer or
as a continuous operational
area monitor.
Product Description:
Used for entering aircraft tanks that have
contained jet fuel. It’s alarms, gas measurement
scales and calibration gases are all specially
tailored for use in environments containing jet fuel
vapors.
Calibration: Yes
Digital Protractor
02500-01
GSE-013
Benefits:
• “Hold” button will freeze a
reading
•Angle is displayed upright
regardless of protractor
position
“Similar to”
Product Description:
Measures angles of various aircraft components.
Calibration: Yes
UX Validator
02-1103-01
GSE-014
Benefits:
• Simultaneous display of No.
1 and No 2 stabilator signal
paths show the technician
complete system
interoperability
Product Description:
The UxValidator™ increases readiness by
synthesizing Stab/SAS measurement data and
reducing troubleshooting time. Used to
troubleshoot the stabilator amplifiers.
Calibration: Yes
VIDS Line Test Set
100-601164-000
GSE-015
Product Description:
In-line test set for cockpit indicators.
Calibration: Yes
Nitrogen Servicing Unit
1217AS100-2
GSE-016
Product Description:
Used to service aircraft nitrogen systems with
high pressure supply.
Calibration: Yes
Nitrogen Servicing Unit, Portable
1428AS100-1
GSE-017
Benefits:
• Portable
• Relatively light
Product Description:
Portable nitrogen servicing unit.
Calibration: Yes
Decade Box Resistor
1433-12
GSE-018
Product Description:
Used for L/H relay panel troubleshooting/
diagnostics.
Calibration: Yes
Tire Bead Breaker
14-4039-0010
GSE-019
Benefits:
• Adjustable
• Simple operation
• Rugged
• Rubber padded to protect
rims
Product Description:
Used to break tire bead from wheel assy.
Calibration: No
Rail Trailer
5380 (1480AS100-1)
GSE-020
Benefits:
• Rail system is compatible
with numerous adapters
• Vehicle towable
Product Description:
Used to transport rail system compatible
adapters.
Calibration: No
Dummy Load
150-ST-FN
GSE-021
“Similar to”
Product Description:
Termaline RF Coaxial Termination, 150W, DC.
Used to provide load for test/ adjustment of
radios.
Calibration: No
Maintenance Stand
1730EG012
GSE-022
Benefits:
• Folding feature
• Brakes on both wheels
Product Description:
Used to support maintenance personnel and
equipment .
Calibration: No
28 VDC Test Lamp
1LAC-A-II
GSE-023
Benefits:
•Simple operation
Product Description:
Tester indication current
Calibration: No
TESTER,CIRCUIT
21C7085G01
GSE-024
Product Description:
Used to troubleshoot the T700 engine electrical
circuitry.
Calibration: No
DISPENSER, WATER WASH
21C7298G01
GSE-025
Benefits:
• Easily transportable.
Product Description:
Delivers a pre-mix wash solution or rinse water to
the T700 engine compressor.
Calibration: Yes
CALIBRATION SET, STANDBY MAG
2591553-903
GSE-026
“Similar to”
Product Description:
Used to calibrate the standby compass system.
Calibration: Yes
Wattmeter, RF Power
4410A-500
GSE-027
Benefits:
• Will accurately measure RF
power under any load
condition.
• Plug in elements are
available to fit frequency and
power needs.
Product Description:
Used to measure resistance and signal loss
through RF cables for troubleshooting.
Calibration: Yes
Jack 5 Ton Axle
53D22020
GSE-028
Benefits:
• Fits easily under jacking
point on Main Landing Gear
drag beam.
Product Description:
This Jack is used for tire and brake maintenance.
Calibration: No
DEPTH GAGE, DIAL INDICATOR
643J
GSE-029
Benefits:
• Easy operation
• Extremely accurate
• Excellent quality
Product Description:
A gauge for measuring the depth of grooves, or
holes, or other concavities during inspections.
Used for checking tolerances during inspections
to ensure any damage or repairs meet
established criteria.
Calibration: Yes
PULLER, PITCH BEAM
65700-10048-041
GSE-030
Product Description:
The puller mechanism uses a lever and
expansion screw to provide the pulling force to
the attachment shaft. The puller provides the
force to remove end threaded beams or shafts
during tail rotor installation, tail rotor blade
assembly, pitch beam assembly, and tail gear
box assembly maintenance.
Calibration: No
Wrench, Box Special:
70700-20210-101
GSE-031
“Similar to”
tool shown here
Product Description:
The 5120-01-105-2029, Wrench, is used to apply torque to the
bifilar assembly expandable pins. The need for this special tool
is due to the tight clearance to access the expandable pins
making conventional crows feet not usable for this maintenance
task.
Calibration: No
WRENCH ASSY, EXPANDABLE PIN
70700-20210-102
GSE-032
Product Description:
Expandable pin wrench allows for easy torque of
expandable pins that require the pin be held still
with use of an allen key.
Calibration: No
POSITIONER ASSY, CHIP DETECTOR
70700-20403-045
GSE-033
Benefits:
• Allows you to turn off the
flow to the chip detector to
perform maintenance.
Product Description:
The positioner assembly design provides the
force to open or block oil from the chip detectors
of the main module of the main gear box,
allowing removal of the strainer without draining
the gear box.
Calibration: No
Tail Rotor Maintenance Crane:
70700-20413-041
GSE-034
Product Description:
The 70700-20413-041 Crane Assembly is designed to mount on
airframe hard points. It is used to remove the tail gearbox or tail
rotor. This crane is used for field maintenance when a regular
crane is not available. It should be noted that this crane is
manually erected and operated.
Calibration: Yes (Cable Proofload)
GUIDE ASSY, HUB
70700-20436-041
GSE-035
Benefits:
• Prevents damage to M/R
shaft extension.
Product Description:
The hub guide assembly provides protection to
the shaft extension when the main rotor head is
lowered over the shaft during shaft extension
removal or installation.
Calibration: No
Tail Rotor Drive Shaft Alignment Set:
70700-20480-041
GSE-036
Product Description:
The 70700-20480-041 Tail Rotor Drive Shaft Alignment Set is
used to confirm alignment of tail rotor drive shaft supports prior to
the installation of the drive shat assembly.
Calibration: No
Kit Includes:
 Storage and transport case
 All equipment to align the T/R drive shaft support
TORQUE REACTOR ASSY
70700-20688-041
GSE-037
Product Description:
This item is a local manufacture. An I-Level
manufactured component using local
manufacture Drawing Guide. Equivalent P/N
3218AS500-1.
Used in conjunction with P/N 70700-20687-102.
Calibration: No
Battery Charger/Analyzer:
70700-25900-101
GSE-038
Benefits:
• Ni-Cad & SLAB applicable
• 115/230 VAC input
• Charging current 0 to 25
amperes
• Discharge current from 0 to 50
amperes
Product Description:
This 70700-25900-101is used to charge, discharge, & monitor
both Ni-Cad and Sealed Lead Acid batteries. The 70700-25900101also monitor’s battery temperature, balance cells, to
determine the electrical condition of vented lead-acid batteries,
sealed lead-acid batteries, and nickel-cadmium batteries
Calibration Required: Yes
Kit Includes:




Battery Charger/Analyzer
AC and DC cable
Connector set
Connector
 Technical manual
Air Transport Kit:
70700-70002-016
GSE-039
“Similar to”
Product Description:
The 70700-70002-041 Air Transport Set contains all the
necessary equipment for loading and securing the S70A aircraft
on cargo plane for air transportation.
Calibration: Yes
Kit Includes:
 Tow bridle and cables
 Aircraft support jacks
 Cargo hook adapter
 Right and Left hand tow plates
 Tail pylon support
ADAPTER SET, STORAGE/
TRANSPORT , MRB/TRB
70700-77116-041
GSE-040
Benefits:
• Modular
• Rail trailer compatible
• Fits four main rotor
blades or two tail rotor
paddles
Product Description:
Used to store the main and tail rotor blades
during scheduled or unscheduled maintenance.
Calibration: No
CART ASSY, AIRCRAFT
70700-77200-041
GSE-041
Product Description:
The adapter cart design allows storage, transport,
and tear down of the main rotor head, the
auxiliary power unit, transmission oil cooler, and
the main gear box.
Calibration: No
APU ADAPTER SET
70700-77201-041
GSE-042
Product Description:
The APU adapter set is comprised of the
interface hardware to utilize the adapter cart to
support the APU and a portable storage case.
The design of the hardware allows the removal
and installation of the APU QEC gear while
mounted to the adapter cart.
Calibration: No
Oil Cooler Adapter Kit:
70700-77202-041
GSE-043
Product Description:
The 70700-77202-041, Oil Cooler Adapter Kit, is used to store
and transport the S70A oil cooler when removed from the aircraft
for maintenance. The storage adapter can be used
independently for storage or in conjunction with a standard 48”
rail trailer for transport.
Calibration: No
Kit Includes:
 Storage and transport case
 3 each adapter assemblies
Adapter Kit, Rotor Head:
70700-77203-041
GSE-044
v
Product Description:
The 70700-77203-041, Rotor Head Adapter Kit, is used to store
and transport the S70A rotor head when removed from the
aircraft for maintenance. The storage adapter can be used
independently for storage or in conjunction with a standard 48”
rail trailer for transport.
Calibration: No
Kit Includes:
 Storage and transport case
 M/R Head adapter assembly
ADAPTER SET, MAIN GEAR BOX
70700-77204-041
GSE-045
Product Description:
The adapter assembly design provides support
for the main gear box that can be relocated and
act as an interface providing lifting eyes to load
the gear box on the adapter cart.
Calibration: No
Compressor Assy
70700-77300-041
GSE-046
Benefits:
• Prevents injury to
maintenance personnel
Product Description:
The spring compressor is comprised of a face
plate with two take-up bolts and a spring
compressor adapter. Tightening the nuts
compresses the disconnect coupling springs to
allow safe removal or installation during
maintenance.
Calibration: No
REMOVER/INSTALLER
70700-77301-041
GSE-047
Product Description:
The fold lock hinge bushing installer/remover is
comprised of a tubular pusher, cup refractor,
threaded bolt, and forcing nut. When the forcing
nut is threaded down the rod against the pusher,
the pusher will force the bushing in or out of the
fold lock hinge.
Calibration: No
INSTALLER, MAIN
70700-77308-041
GSE-048
Product Description:
The main gear box housing and pinion assembly
seal installer is comprised of an outer cylinder
and inner shaft. The diameter of the outer
cylinder is designed to mate the seal surface
without touching the housing. The seal installer is
used by threading the inner shaft into the bevel
gear shaft then tightening the nut as the opposite
end of the inner shaft works against the top of the
outer cylinder forcing the outer cylinder against
the seal, pressing the seal into position in the
housing.
Calibration: No
INSTALLER, MAIN GEARBOX SEAL
70700-77309-041
GSE-049
Product Description:
The main gear box input module input pinion and
hosing seal installer is comprised of an outer
cylinder and an inner shaft. The diameter of the
outer cylinder is designed to mate the seal
surface without touching the housing. The seal
installer is used by threading the inner shaft onto
the pinion shaft, then tightening the nut at the
opposite end of the inner shaft acting against the
top of the outer cylinder, forcing the outer cylinder
against the seal, and seating the seal in the
housing.
Calibration: No
INSTALLER, TAIL
70700-77310-041
GSE-050
Product Description:
Used during replacement of the input/output
seals of I/G/B and Input seal of T/G/B
Calibration: No
Installer, Assembly
70700-77312-042
GSE – 051
Product Description:
The bearing installer provides the force to install bearings onto
the tail drive shaft, damper bearing support housing, and the
disconnect coupling
Calibration Required: No
Clamp Assembly, Spring
70700-77316-041
GSE – 052
Benefits:
The holding clamp design holds
spring capsules in place while the
extension arm, adjusted by
rotating the nut on the jackscrew,
overcomes the spring tension
from the tail rotor cables, pulleys,
torque shaft (STA.321), and
spring capsules which allows the
quadrant to be disconnected
• Much safer than
disconnecting by hand.
• Leaves capsules ready for
install.
Product Description:
The holding clamp design holds spring capsules in place while
the extension arm, adjusted by rotating the nut on the jackscrew,
overcomes the spring tension from the tail rotor cables, pulleys,
torque shaft (STA.321), and spring capsules which allows the
quadrant to be disconnected.
Calibration Required: No
Puller Assembly, Engine
70700-77317-041
GSE – 053
Benefits:
• Safely pull shaft without
damage to spline
Product Description:
The puller provides the force required to pull the output shaft
assembly from the forward support tube and the T700 engine.
Calibration Required: No
Seal Remover
70700-77319-041
GSE – 054
Product Description:
Used to remove input seal from tail rotor gearbox
Calibration Required: No
Installer/ Remover, Breakaway Valve
70700-77348-041
GSE – 055
Product Description:
USED for the installation and removal of the breakaway valves.
Calibration Required: No
Removal Set, Main Rotor Head
70700-77363-041
GSE – 056
Product Description:
Used to remove the Main Rotor Head from the Main Gearbox in
the event that the lower split cones are seized to the Main Rotor
Shaft Extension. It is used as an alternate to the procedures
outlined in the Rotor Systems maintenance manual.
Calibration Required: No
Kit Includes:
 Attachment plate
 Bolts
 Slide
Eye Assembly, Hoisting
70700-77404-041
GSE – 057
Product Description:
The lifting eye is a large cap-type lifting eye with internal threads
up the cap sidewall. The lifting eye is threaded to mate with the
external threads of the main gear box main shaft to facilitate lifting
with a lifting device during unscheduled maintenance and for
removal or replacement.
Calibration Required: No
Lifting Bar Assembly
70700-77408-046
GSE – 058
Benefits:
• Allows user to pull engines
with blades in folded position
Product Description:
The engine components lifting bar is used for the
removal/replacement of the T700 GE engines and the main gear
box input modules with the main rotor blades folded
Calibration Required: No
Fuel Quantity Test Set Adapter
70700-77543-041
GSE – 059
Product Description:
The test adapter is used to connect the fuel quantity system test
set and the H-60 connecting plug of the fuel quantity signal
conditioner for testing.
Calibration Required: No
Test Harness Assembly, De-Ice
70700-77687-041
GSE – 060
Product Description:
The test harness provides the interconnection of a fault simulator
into the blade de-ice system to check the operation and system's
self-test integrity
Calibration Required: No
Kit Includes:
 Arial 18 plain text
 use check mark bullet to list kit contents
Tire Pressure Gage
7188BH
GSE – 061
Product Description:
Used to measure tire pressure.
Calibration Required: Yes
Angle position indicator (API)
8810A
GSE-062
Product Description:
Position Transmitter/ Limit Switch bench testing.
Calibration: Yes
TRB Boot EXP Tool
96700-15001-041
GSE-063
Benefits:
• Time Saving
• Prevents damage to T/R
boot during installation
Product Description:
Used to facilitate installation of T/R boot onto
blade without damaging it
Calibration: No
Puller Kit, Universal
A57Q
GSE – 064
Product Description:
For standard and specialized bronze, steel, rubber, or Enlox
bushings. Range of adaptor sizes covers nearly all shackle and
steering bushings. New bushings are inserted by tightening
screw, which forces the bushing into place without hammering.
Sleeve permits forcing out of old bushings and is particularly
useful where limited space prevents driving them out. The five
smallest adaptors are used only with the smallest driver. Set
includes illustrated tools.
Calibration Required: No
Air Data Test Set
ADTS405F
GSE – 065
Product Description:
Used to provide static and pressure inputs for troubleshooting
instruments and flight control systems.
Calibration Required: Yes
Kit Includes:
 Main processing unit
 Hand held control
 Interface cables
Puller
CJ2004
GSE – 066
Product Description:
Use on bearings, bearing races, gears, bushing retainers, etc.
Builds any of 12 different pullers. 2 and 3-jaw capability with three
sets of jaws. All jaws reverse for inside and outside pulls. Pulling
capacity: (short jaws) 4 1/2-ton, (medium jaws) 6 1/2-ton, (large
jaws) 8-ton.
Calibration Required: Y/N
Jack, Tripod, 12 Ton
CJ69J1270
GSE – 067
Product Description:
Three 12 ton hydraulic jacks are used to jack the S-70B helicopter
off the ground for aircraft maintenance.
Calibration Required: No
Puller
CJ950
GSE – 068
Product Description:
Bearing Separators. For separating and pulling double bearings
and close fitting gears. Use with tapped hole, 2-jaw pullers, or
floor presses.
Calibration Required:
No
Scale, Digital
CS-5000
GSE – 069
Benefits:
• Superior RF Protection
• Large Stainless Steel
Weighing Platform
• Compact Design
Product Description:
Used for mixing compounds and for preparing weight and balance
stack ups.
Calibration Required: Yes
ARBOR PRESS, 1/2 TON
101006
GSE-070
Benefits:
• Smooth action
gears permit finite
ram control.
Product Description:
Single leverage arbor press. Used for
bushing/bearing installation and removal.
Calibration: No
Fuel Quantity Test Set:
DE8491
GSE-071
Benefits:
• Push button operation with
digital readouts
• Wet & Dry Cal
• Downloadable test results
• Self calibration
• Rechargeable battery pack
• Multi aircraft functionality
• Embedded procedures
Product Description:
The DE 8491 is a microprocessor controlled fuel quantity test set
used for the testing/troubleshooting of the S70I fuel quantity
indicating system. It takes measurements and calculates pass/fail
limits automatically, thus eliminating operator error.
Calibration Required: Yes
Kit Includes:
 Technical manual
**Aircraft connection cables sold separately**
Drain Attachment
H538A-3
GSE – 072
Product Description:
The gear box drain attachment is utilized to open the springloaded check valve on the intermediate gear box or tail gear box
to control oil flow when draining the system after chip light
detection of chips or during other unscheduled maintenance.
Calibration Required: No
Radio Test Set:
IFR 4000
GSE-073
Calibration Required
Benefits:
• Lightweight (< 8lbs)
• 8 hour battery life
• Ergonomic design
• Push button operation
• Large digital display screen
Product Description:
The IFR 4000 is a compact, lightweight and weatherproof unit
designed for testing ILS, VOR, Marker Beacon and VHF/UHF
communications avionics systems.
Calibration Required: Yes
Kit Includes:





VHF/UHF multi-band antenna
 AC line cord
Customized transit case
 TNC short
Technical manual (CD)
 Spare fuse
AC/DC power supply
TNC (male) to TNC (male) coaxial cable
Spring Scale
IN-10
GSE – 074
Product Description:
Used to measure force required to move various controls and
components of aircraft.
Calibration Required: Yes
Mobile Fuel Tank Ventilating System
MAV-1
GSE-075
Product Description:
Used to vent open fuel cells for maintenance.
Calibration: No
Multimode Eddy Current/Bond Tester
MIZ-21B
GSE-076
Benefits:
Product Description:
Calibration:
TOW TRACTOR AIRCRAFT
10-10-0001
GSE-077
Benefits:
•Protection from the elements.
Product Description:
Used for moving aircraft with the use of a tow bar.
Calibration: No
Tool Kit, General Mechanic
PEOAVN-B01-GSA
GSE –078
Benefits:
• Approved fit, form, &
function by Boeing & U.S.
Army
• State of the Art System
• Router Cut Foam for Rapid
Inventory
Product Description:
Contains general hand tools required to maintain aircraft
Calibration Required: No
Kit Includes:
Tool Kit, Airframe
PEOAVN-B02-GSA
GSE –079
Benefits:
• Approved fit, form, &
function by Boeing & U.S.
Army
• State of the Art System
• Router Cut Foam for Rapid
Inventory
Product Description:
Contains most tools needed for typical airframe repairs.
Calibration Required: No
Kit Includes:
Tool Kit, Electrical
PEOAVN-B06-GSA
GSE –080
Benefits:
• Approved fit, form, &
function by Boeing & U.S.
Army
• State of the Art System
• Router Cut Foam for Rapid
Inventory
Product Description:
Contains most tools necessary for electrician’s diagnosis and
repair
Calibration Required: No
Kit Includes:
Tool Kit, Power Plant
PEOAVN-B07-GSA
GSE –081
Benefits:
• Approved fit, form, &
function by Boeing & U.S.
Army
• State of the Art System
• Router Cut Foam for Rapid
Inventory
Product Description:
Contains most tools needed for typical engine repairs.
Calibration Required: No
Kit Includes:
Tool Kit, Powertrain
PEOAVN-B13-GSA
GSE – 082
Benefits:
• Approved fit, form, &
function by Boeing & U.S.
Army
• State of the Art System
• Router Cut Foam for Rapid
Inventory
Product Description:
Contains most tools needed for typical drive train repairs.
Calibration Required: No
Kit Includes:
Milliohmeter
R1L-E-2
GSE-083
Product Description:
Used to measure resistance in wires and circuits.
Calibration: Yes
Fuel Integrity Tester
SK2000FIT
GSE-084
Benefits:
• Digital display
• Very acurate
• Several measurement
options.
Product Description:
Used to ensure the fuel system is completely
sealed following maint
Calibration: Yes
Transponder Test Set:
T-47NH
GSE-085
Benefits:
• Long battery life (8 hours)
• MIL-PRF-28800 class 2
• Multi functional testing
 Mode 1, 2, 3 A/C
 TACAN
 TCAS
 DME
Product Description:
The T-47NH Multifunction Ramp Test Set is a battery powered
portable unit used to test the operation of Transponders and
Interrogators including: Mode S Transponders, TCAS
Interrogators, and TACAN/DME equipment installed on the S70I
aircraft.
Calibration Required: Yes
Kit Includes:
 Built-In KIV-6 module bay
 KIR/KIT cable
 Technical manual
 Direct connect cable
 Calibrated directional antenna




AC/DC power cord
Antenna handle
Neck strap
Extension cable
Tool Kit, Orfit
WE301K
GSE – 086
Benefits:
•Makes o-ring installs easier
•Prevents “pinched” packings
Product Description:
Used to facilitate seal installation and removal.
Calibration Required: No
Borescope Kit:
6650-T700-003
GSE-087
Benefits:
• Portable
• Single person operation
• Ability to inspect hard to
reach locations
• Enhances troubleshooting
capabilities
Product Description:
The 6650-T700-003 Borescope Kit is used to perform inspection
and troubleshooting procedures on the S70A aircraft, specifically
on the GE 700 series engines and the aircraft flight control rods.
Calibration Required: Yes
Kit Includes:
 Optical probes
 Optical cable harness
 AC power cable
 Portable storage/carrying case
 Technical manual
Rescue Hoist Wire Rope Inspection:
ZGS-11000-4
GSE-088
Benefits:
• Self lubricating
• Applicable to all hoists
• Portable
• Self contained
• One person operation
Product Description:
The ZGS-11000-4, Rescue Hoist Inspect kit, detects faults in wire
not found on visual inspection (up to a single broken strand) and
provide digital downloadable test results for wire trend monitoring.
The unit also allows for cable load testing with no flight.
Calibration: Yes
PLUG, AIR INLET
70700-20114-109
GSE-089
Product Description:
The plug is used to block compressor air
discharge of the right-hand and left-hand inlet
anti-ice bleed air tubes during vibration analysis.
Calibration: No.
Bearing/Bushing Install/Removal Set:
70700-20129-041
GSE-090
Product Description:
The 70700-20129-041 staking tool kit is used to remove and
install bushings and bearings in stabilator fittings. The kit
contains cutting tools for removing bearings and roll staking tools
for installing bearings.
Calibration: NO
Kit Includes:
 Taps
 Reamers
 Inserts
 Staking tools
Bearing Install Remover:
70700-77306-041
GSE-091
Product Description:
The 70700-77306-041, Bearing Installer/Remover Tool, is used
when the spherical bearing is to be removed and replaced in the
rod end of the main rotor damper and upper pitch control rod end,
with or without removing the damper or pitch control rod from the
rotor Head. The installer/remover consists of a bearing pusher, a
reactor cup, a pilot shaft and a forcing nut. The bearing pusher is
a cup shaped pusher designed to span the sphere and mate the
outer race surface of the bearing.
Calibration: No
DIAL INDICATOR
196B1
GSE-092
Benefits: Accurate and
reliable, smooth in operation
and simple to operate.
Product Description:
Used for precise measurements during
maintenance inspections.
Calibration: Yes
HYD SAMPLING KIT
2087009-02
GSE-093
Benefits: Ability to measure
particle counts, viscosity, and
temperature in one unit. This
eliminates the need for
separate calibration and
additional maintenance.
Product Description:
Units provide mechanism for measuring particle
contamination in fluids, primarily aviation
hydraulic fluid. Used to ensure the fluid that is
running through the aircraft has not been
contaminated, or that fluid that will be entering
the aircraft is not contaminated.
Calibrate to full ISO 11171 standards.
Calibration: Yes
SHIP CONT IGB MDL
70700-20806-041
GSE-094
Product Description:
Shipping container for S-70B intermediate gear
box. Used during transport or storage and
preservation.
Calibration: No
SHIPPING CONTAINER
70700-20807-041
GSE-095
Product Description:
Shipping container for S-70B tail gear box. Used
during transport or storage and preservation.
Calibration: No
STEERING BAR ASSEMBLY
70700-77112-041
GSE-096
Product Description:
Attaches to the tail wheel of the S-70B. Used to
steer the helicopter when manually moving for
spotting aboard ship.
Calibration: No.
Hinged Screen Assembly:
70700-20222-041
GSE-097
Benefits:
• Simple installation
• Protection from FOD
Product Description:
The 70700-20222-041 Hinged Screen Assembly is used to cover
the S70I engine high speed shaft during track and balance
operations . The 70700-20222-041 may also be used for general
protection of the high speed shaft anytime the engine inlet is
removed.
Calibration Required: No
Wrench, Box Special:
5120-01-320-0514
GSE-098
“Similar too”
tool shown here
Product Description:
The 5120-01-320-0514 Special Box Wrench is used to apply
torque to the rotor head bolts to 1000 inch-pounds, which
exceeds the recommended torque limits of the standard crowfoot
wrench.
Calibration: No
Maintenance Crane:
SKMC 1050
GSE-099
Benefits:
• Small foot print (60” x 120”
• 1300 LBS payload
• 360° rotation
• 13ft reach
• Easy set up
Product Description:
The SKMC 1050 is a is an all purpose, rugged, high strength
portable maintenance crane designed to attach to the S70A cabin
when an overhead crane is not available. The SKMC 1050 is
capable of removing the engines, rotor head, main transmission,
and tail rotor gearbox of the S70A aircraft.
Calibration Required: Yes (proof load of cable)
Kit Includes:
 Wooden reusable crate
 Technical manual
HYDRAULIC SERVICE UNIT
061481-100
GSE-100
Benefits:
• Provides filtered,
pressurized hydraulic fluid to
aircraft.
Product Description:
Used for hydraulic servicing with filtered fluid.
Calibration: No
PREOILER (PON-6)
061475-101
GSE-101
Benefits:
• Ensures oil entering the
aircraft is filtered
• More control over oil flow
entering component
Product Description:
Used to service engine and transmission oils with
filtered fluid.
Calibration: Yes
Helicopter Transmission Fluid Fill Unit
061477-100
GSE-102
Product Description:
Used to service transmission with filtered fluid.
Calibration: No
Engine Lifting Bar
21C7081G02
GSE-103
Product Description:
Used to remove and install the Black Hawks
engine
Calibration: No
Blade Clamp
70700-20324-047
GSE-104
Product Description:
Used to remove and reinstall the main rotor
blades.
Calibration: No
Adapter Socket, Tail Drive
70700-20687-102
GSE-105
Product Description:
Used to remove flange nuts on the S-70 Drive
train.
Calibration: No
Simulator Set, Radar
A3084100
GSE-106
Product Description:
Troubleshoot the WRAS of the AN/APR-39A(V)
Radar Signals Detecting Set
Calibration: No
Compact Aircraft Support Cart
CASC-S
GSE-107
Benefits:
• Self diagnostic
capabilities
• Much smaller than other
options
• May be used together of
seperatly
Product Description:
Provides electrical, Pneumatic and Hydraulic
Power required for maintenance. Fits inside the
cabin of a S-70A
Calibration: Yes
Remote Controlled Aircraft Handler
Twin 6500SR
GSE-108
Product Description:
Remote Controlled Aircraft Mover. Allows the
handler to move aircraft without a tow bar or tug.
Calibration: No
AVUM Footlocker Tool Kit
PEOAVN-B90-GSA
GSE-109
Product Description:
The AVUM Footlocker contains precision
measurement tools, torque wrenches and other
tooling not typically found in general tool kits.
Calibration: Yes
Rigging Kit
70700-77205-041
GSE-110
Benefits:
• Hard case prevents
unwanted damage to pins
•Easy to inventory
Product Description:
Used for rigging of flight controls and rotor blades.
Calibration: No
Wattmeter Element
25B
GSE-111
Product Description:
Used with wattmeter to measure radio power.
Calibration: No
Wattmeter Element
25C
GSE-112
Product Description:
Used with wattmeter to measure radio power
Calibration: No
Wattmeter Element
25D
GSE-113
Product Description:
Used with wattmeter to measure radio power
Calibration: No
Wattmeter Element
250D
GSE-114
Product Description:
Used with wattmeter to measure radio power
Calibration: No
Download