HOW TO INSTALL FXCORE100 ROBOT
This guide outlines the step by step installation of Fxcore100 Robot with ease.
Note: The timeframe you attach the EA determines the risk exposure. The Lower
the timeframe the higher the risk exposure. While the higher the timeframe the
lower the risk exposure. So the higher the risk exposure the higher the profit and
the lower the risk exposure the lower the profit. Best option is low risk exposure.
Gradual growth of account keeps you safe and saves you from scaring
drawdowns.
Use the default setting of the EA. Do not adjust any settings on the EA except you
are changing the magic numbers as stated in step 9.
The following account size is suitable on the following timeframe for a very Low
risk trading and long term target in years. Some users will surely become USD
millionaires in less than 10yrs target. If you don't belive you won't become.
Use only EURUSD
The EA comes in 2 files, the Fxcore100EA_BUY and Fxcore100EA_SELL. So you will
be openning 2 charts of EURUSD, one for BUY EA and the other for SELL EA.
$200 to $2000 open on H4 Timeframe
$2000 to $4000 open on H4 Time frame into 4 charts
$4000 to $7000 open on H1 Timeframe
$7000 to $10000 open on H1 Timeframe into 4 charts
$10000 to $13,000 open on 30m timeframe
$13,000 to $16,000 open on 30m, and H1 making 4charts
$16000 to $18000 open on 30m and H1 into 4chart making 6charts
$18000 to $20000 open on 15m timeframe
$20000 to $26000 open on 15m, and H1 making 4charts
$26000 to $30000 open on 15m and H1 into 4chart making 6charts
$30000 to $35000 open on 15m and 30M making it 4charts
$35000 to $40000 open 15m into 4charts
$40000 to $50000 open 5m timeframe
$50000 to $60000 open 5m and H1 into 4chart making 6charts
$60000 to $70000 open 5m and 30m making 4 charts
$70000 to $80000 open 5m and 15m making 4 charts
$80000 to $90000 open 5m into 4charts
$90000 to $100000 open 5m into 4charts and H1 making it 6 charts
Above $100000, contact Admin
Note: Account size of $200 to $1000 on H4 timeframe is on high risk.
Its best run on a cent account with same settings equivalent to the figures above.
For those using more than 2 charts, its very important you read step 9.
Forex EA is best run on a VPS. Kindly go through the iozoom vps guide that was
sent to your email to know how to get a VPS and set it up.
Step1: Log into your VPS to install the MT4 Terminal. To do that, copy the MT4
installation file from your computer, then open the VPS and paste it on the VPS
desktop. Click and install your MT4 on the VPS.
Step 2: The Robot know as EA comes in 2 files, the Fxcore100EA_BUY and
Fxcore100EA_SELL. After purchase, it will be sent to your specified email address.
Download the two files from your email to your computer.
Step 3: Open the downloaded files, select the two files (Fxcore100EA_BUY and
Fxcore100EA_SELL) and copy.
Step 4: Open your VPS,
Open your MT4, click on File and click Open Data Folder
Step 5: click to open MQL4, then click to open Experts and paste the two copied
files in the EXPERT folder
Step 6: Close and reopen the MT4 again. Click and set Auto Trading on the MT4
Active. Clicking on it switches it ON and OFF. The picture below shows its ON,
Meaning that Auto Trading is Active.
Step 7: Open EURUSD chat. Open the timeframe suitable for your accocunt size as
stated in beginning of this guide. Go to Expert list on the MT4 and right click on
the Fxcore100EA_BUY then click on Attach to a chart and click ok.
Step 8: Open another EURUSD chat. Open same timeframe as you did on step 7
for your accocunt size. Go to Expert list on the MT4 and right click on the
Fxcore100EA_SELL then click on Attach to a chart and click OK
The screen of your MT4 chart should look like the picture below.
Step 9. Some account sizes requires you open more than 2 charts.
For those openning 4 charts, it means you will have BUY EA in 2 charts and SELL
EA in 2 charts making it 4 charts. And for those openning 6 charts, it means you
will have BUY EA in 3 charts and SELL EA in 3 charts making it 6 charts.
For those whose account size requires them to open more than 2 charts, then its
very important you change the magic numbers of the BUY and SELL EA for the
extra charts so that it won't be same with the magic number of first 2 charts EA.
The BUY and SELL files already came with a different magic numbers which you
don't need to change if you are using only 2 charts of BUY and SELL EA.
How to locate and change the magic numbers of the EA.
When you click to attach the robot to chart as you did in Step 7 and Step 8, the
window below will appear. Under input settings, you will see the Magic numbers.
Double click on the numbers to edit it. Change it to any number you wish. You can
add extra two numbers to the exisiting ones or change all of them. You can use
111111 or 22334490 or any number you wish.
Change magic numbers of both the BUY EA and SELL EA. Just make sure that EA
on other charts does not have same numbers with any EA on another chart. After
that you click OK.
Kindly make sure you followed all the steps stated in this guide to avoid wrong
installation. Make sure you used the suitable timeframe for your account size.
Now your fxcore100 Robot EA is installed and read to start trading for you.
If you have any question do not hesitate to contact me.
Telegram: t.me/ymsinforex
Admin: t.me/ymsinforex1
www.fxcore100.com