EC-HDD2 EC-HDD2 USB 3.0 DUAL BAY HDD DOCKING STATION EC-HDD2 The Sabrent Dual Bay Hard Drive Dock enables you to access and transfer data between your computer and two hard drives simultaneously, or between the two hard drives themselves. Moreover, you can also use the Sabrent Dock to clone hard drives offline at maximum speed. Plug and play support for both 2.5” and 3.5” SATA, SATA II, SATA III and SSD HDDs (up to 3TB per bay). USB 3.0 Interface supports super speed data transfer up to 5Gbps (reverse compatible with USB 2.0). Especially ideal for system integrators, administrators and computer technicians. EC-HDD2 IDENTIFICATION OF BUTTONS EC-HDD2 INSTALLATION 1 - Insert 2.5” or 3.5” Sata HDD from top EC-HDD2 3 - Connect USB Cable to EC-HDD2 EC-HDD2 UN-INSTALL 1 - Power Off EC-HDD2 The size of Target Disk must be equal to or larger than the size of Source Disk BAY 2 LED FOR CLONING HDD1 = Source Disk; HDD2 = Target Disk. BAY 1 4 - Attach the other end to your laptop or desktop PC FEATURES 3.5” HDD flashing and the cloning process will begin 2 - Unplug 2.5” or 3.5” SATA HDD from top 2.5” HDD 2 - Connect Power Adapter to EC-HDD2 5 - Power On SPECIFICATIONS COPY BUTTON USB 3.0 SATA 2.5” & 3.5” DUAL BAY HARD DRIVE DOCKING STATION (DC IN) 1 USB PORT Please handle with care. Sabrent is not responsible for any software, hardware or data lost with the hard drive. COPY BUTTON 2 3 4 5 www.sabrent.com