Fabric End-Joining Techniques Joining Kit © EagleBurgmann Expansion Joint Solutions 2013 | 2 Wednesday, November 29, 2017 Ensure sufficient overlap length is provided © EagleBurgmann Expansion Joint Solutions 2013 | 3 Wednesday, November 29, 2017 Mark the overlap – Cut off the excess © EagleBurgmann Expansion Joint Solutions 2013 | 4 Wednesday, November 29, 2017 Open the layers – Provide a solid working area © EagleBurgmann Expansion Joint Solutions 2013 | 5 Wednesday, November 29, 2017 Lay the first layer from one side © EagleBurgmann Expansion Joint Solutions 2013 | 6 Wednesday, November 29, 2017 Lay down the same layer from other side – Stitch both sides © EagleBurgmann Expansion Joint Solutions 2013 | 7 Wednesday, November 29, 2017 Hold the PTFE layers - Apply tape © EagleBurgmann Expansion Joint Solutions 2013 | Wednesday, November 8 29, 2017 Fold down the PTFE © EagleBurgmann Expansion Joint Solutions 2013 | 9 Wednesday, November 29, 2017 Fold the PTFE – Apply tape © EagleBurgmann Expansion Joint Solutions 2013 | 10 Wednesday, November 29, 2017 One side Alusil/Thermosil laid down – apply advesive © EagleBurgmann Expansion Joint Solutions 2013 | 11 Wednesday, November 29, 2017 Spread the adhesive © EagleBurgmann Expansion Joint Solutions 2013 | 12 Wednesday, November 29, 2017 Apply adhesive at locking area © EagleBurgmann Expansion Joint Solutions 2013 | 13 Wednesday, November 29, 2017 Apply and spread adhesive on the edges – lay the FR © EagleBurgmann Expansion Joint Solutions 2013 | 14 Wednesday, November 29, 2017 Apply and spread adhesive on the edges – lay the FR © EagleBurgmann Expansion Joint Solutions 2013 | 15 Wednesday, November 29, 2017 Position the FR on both sides © EagleBurgmann Expansion Joint Solutions 2013 | 16 Wednesday, November 29, 2017 End-Joining is now complete © EagleBurgmann Expansion Joint Solutions 2013 | 17 Wednesday, November 29, 2017 Complete the installation as instructed in manual © EagleBurgmann Expansion Joint Solutions 2013 | 18 Wednesday, November 29, 2017
