Laser Marking Applications
Laser Marker
Selection Guide
FAYb Laser Marker
POWER
Engine block
Engine part
Cam shaft
LARGE SELECTION
Cast
LASER MARKER
Medical instruments
Battery housing
Laser diode
FAYb
Bearing
LASER MARKER
Precautions for Proper Use
Sensor
IC
Molded resin part
Molded resin part
Laser safety
• This product is classified as a Class 4 Laser Product in IEC/JIS/FDA regulations 21 CFR 1040.10 and 1040.11. Never look at or touch the direct laser
beam and its reflection.
LP-M/MA SERIES
• Handle the product according to the instruction given on the warning labels.(Warning labels are not shown in the product photographs in this catalog.)
CO2 Laser Marker
LP-Z SERIES
LP-S/SW SERIES
• The laser used by this product generates infrared light that is invisible to the human eye.
Use particular caution when the laser is operating.
Maintenance
• Air filter: Regularly clean the air filter attached to the Laser Marker to maintain cooling effects.
• Laser pointer emission port: Dust or chips adhering to the laser pointer emission port may affect the
printing quality or seriously damage the laser marker. Clean the laser pointer emission port regularly.
Recommended use of a dust collector
• Depending on the object being marked, harmful gasses or smoke that have a detrimental effect on the
human body or the laser marker may be generating during marking. If your application falls under this
description, use a dust collector.
POWER
PET bottle
Outer box(GS1datamatrix)
Coaster
Laser label (marking + half-cut)
LP-RF SERIES
*For more information, contact your sales representative.
LP-V SERIES
CO2
Disclaimer
LASER MARKER
The applications described in the catalog are all intended for examples only. The purchase of our products described in the catalog shall not be regarded as
granting of a license to use our products in the described applications. We do NOT warrant that we have obtained some intellectual properties, such as
patent rights, with respect to such applications, or that the described applications may not infringe any intellectual property rights, such as patent rights, of a
third party.
Please contact ..........
Ceramic capacitors
Connector
CD•DVD
Nameplate
Industrial Device Business Division
1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan
industrial.panasonic.com/ac/e/
Printed circuit boards
Silicone tubing
Retortable pouches
©Panasonic Corporation 2019
lens
No. CE-LMDJ-3-2 July, 2019
Specifications are subject to change without notice.
LP-RC SERIES
2019.07
LP-400 SERIES
industrial.panasonic.com/ac/e/
LP-GS SERIES
LP-300 SERIES
Laser wavelength
380
Ultraviolet
region region
100
400
FAYb LASER MARKER
High-power Output and 3D-control Laser Marker
LP-M/MA SERIES
16w 40w 80w
120
500
330
220
Laser Processing
Applications
3D-control FAYb Laser Marker
LP-Z SERIES
FAYb Laser Marker
Laser Plastic
Welding
120
Alloy steel
330
Copper, brass
This all-round laser marker features 3D
rating and is capable of 3D marking.
marking capability and wide 300 x 300 mm
The laser interception mechanism and interlock are
(11.811 x 11.811 in) marking area.
M e t a l Aluminum alloys
Galvano Scanning System
Scanning Laser Processing Machine
Visible region
*The LP-MA series is introduced to only limited countries.
High-power Output FAYb Laser Marker
LP-S/SW SERIES
700
780
1,000
90
FAYb
FAYb Laser
1,060 nm
1,064 nm
1,070 nm
IP67G
Removable
Depression processing on metal
160
50w 100w
FAYb Laser Marker
LP-RF SERIES
200
90
5
Reliable hard design such as high
noise resistance controller and IP64
under a harsh condition such as an environment
rating head. Simple and easy
containing oil mist.
operation.
EP (Epoxy)
PA (Polyamide / nylon)
400
PBT (Polybutylene terephthalate)
PET (Polyethylene terephthalate)
PMMA (Acrylic)
POM (Polyacetal)
PP (Polypropylene)
Removal of coating film from gasket
PS (Polystyrene)
Engraving on die
uses a laser beam to generate heat
Laser beam
PU (Polyurethane)
Pressure
PVC (Polyvinyl chloride)
between adherends. For laser welding,
High-definition Laser Marker
LP-V SERIES
a transparent resin (permeable
material) and light absorbing resin
Permeable
material
Silicone resin
Ceramics
Others
Generally, to achieve a secure bond,
pressure between the materials is
required when lasing.
160
Deburring of metal parts
contrast marking on resin surfaces.
Removal of gold plating from
electronic parts
Infrared region
CO2 Laser Marker
Paper
●
Rubber
Plastic Welding Applications
1
LP-GS SERIES
5w
Film cutting
ABC
Resin gate cut
Safty light curtain: Case and front panel
Small
Minimized head size contributes to
operability. The high-grade LP-400 CO2
floor space c ost reduction.
laser marker delivers, meeting needs
Corresponding to the small size
ranging from marking to processing.
characters and 2D code.
Sensor: Case and Window for
communication signals
Consultation
We suggest the best model based on
your requirements.
4
Removal of ribbon cable insulation
Aluminum
PC (White)
PC (Black)
PMMA (Transparent)
PP (Black)
PS (Black)
PS (White)
■ CO
laser marker
2
●
●
●
●
●
●
PVC (White)
Glass epoxy
Epoxy
Glass
2
Testing and reporting
of test results
3
Demonstration
using actual equipment
Rubber gaskets cutting
Automotive sensor: Welding case
Discussion with the
customer
We report the test results by providing
a test marking report and marked
samples after testing with the actual
laser marker.
We provide a demonstration to check
that the marking quality and operation
are in accordance with your request.
5
6
Attendance during commissioning,
explanation of operating procedures
After-sales service
Microfluidic device: Welding flow path
Entry-Level Model CO2 Laser Marker
LP-RC SERIES
LP-300 SERIES
35w
10w
5
Copper
Compact CO2 Laser Marker
Performance, functionality, quality,
85
●
●
Steel
Laser marker installation process flow
160
High-speed Marking Type CO2 Laser Marker
●
●
Stainless steel (SUS)
* We can check marking results using actual workpieces provided by your company. For details, please contact our sales office nearest you.
CO2 LASER MARKER
110
Wood
Glass
Absorbing
material
LP-GS series
LP-300 series
* The above shows typical judgment results. Judgment results may differ when used on customers' workpieces.
This short pulse laser marker is suitable for high
55
●
UF (Urea)
(absorbing material) must be combined.
12w
10w 20w 30w 9.3μm
●
●
●
●
●
●
R e s i n PF (Phenol)
What is laser Welding?
Laser welding is a bonding method that
LP-400 SERIES
●
●
●
●
●
ABS (Acrylonitrile butadiene styrene)
PC (Polycarbonate)
The head is removable.
CO2 Laser
9,300 nm
10,600 nm
Gold, silver
PE (Polyethylene)
This model can be used for a marking operation
CO2
Nickel alloys
Removable
* The VL-W1 series is introduced to only limited countries.
The head features an IP67G rating.
90
Titanium alloys
Removable
SMART
High-performance Laser Marker
10,000
Processing of bearing surface
17w
Magnesium alloys
VL-W1 SERIES
This model realizes high productivity and safety.
LP-RC series
LP-400 series
＝Non-usable
■ FAYb laser marker
CO2 laser marker
●
●
●
●
●
●
●
●
Iron
Carbon steel
This high-end model features a head with an IP64
17w 42w
FAYb laser marker
13w 25w
SAFER
●=Good ○=Usable △=Incompatible
LP-M series LP-Z series
LP-S series LP-V series
LP-RF series
Material
redundantly equipped.
600
Material compatibility chart
We hold a meeting to discuss integration
specifications and the communication
between the laser marker and PLC.
50
Shorter marking times with speeds
Entry-level model for laser marking
1.4 times faster than before.
Cost-effective lasar marker
Corresponding to the high-speed line.
Wavelength
[nm]
Film driling
Insulation removal
ECU: Welding cover
Display: Welding water proof panel
In accordance with your request, we
provide support to install machines
and operate laser markers.
In accordance with your request, we
offer on-site maintenance service and
appropriate inspection service after
your unit is swapped with a
replacement unit.
Laser Marking Applications
Laser Marker
Selection Guide
FAYb Laser Marker
POWER
Engine block
Engine part
Cam shaft
LARGE SELECTION
Cast
LASER MARKER
Medical instruments
Battery housing
Laser diode
FAYb
Bearing
LASER MARKER
Precautions for Proper Use
Sensor
IC
Molded resin part
Molded resin part
Laser safety
• This product is classified as a Class 4 Laser Product in IEC/JIS/FDA regulations 21 CFR 1040.10 and 1040.11. Never look at or touch the direct laser
beam and its reflection.
LP-M/MA SERIES
• Handle the product according to the instruction given on the warning labels.(Warning labels are not shown in the product photographs in this catalog.)
CO2 Laser Marker
LP-Z SERIES
LP-S/SW SERIES
• The laser used by this product generates infrared light that is invisible to the human eye.
Use particular caution when the laser is operating.
Maintenance
• Air filter: Regularly clean the air filter attached to the Laser Marker to maintain cooling effects.
• Laser pointer emission port: Dust or chips adhering to the laser pointer emission port may affect the
printing quality or seriously damage the laser marker. Clean the laser pointer emission port regularly.
Recommended use of a dust collector
• Depending on the object being marked, harmful gasses or smoke that have a detrimental effect on the
human body or the laser marker may be generating during marking. If your application falls under this
description, use a dust collector.
POWER
PET bottle
Outer box(GS1datamatrix)
Coaster
Laser label (marking + half-cut)
LP-RF SERIES
*For more information, contact your sales representative.
LP-V SERIES
CO2
Disclaimer
LASER MARKER
The applications described in the catalog are all intended for examples only. The purchase of our products described in the catalog shall not be regarded as
granting of a license to use our products in the described applications. We do NOT warrant that we have obtained some intellectual properties, such as
patent rights, with respect to such applications, or that the described applications may not infringe any intellectual property rights, such as patent rights, of a
third party.
Please contact ..........
Ceramic capacitors
Connector
CD•DVD
Nameplate
Industrial Device Business Division
1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan
industrial.panasonic.com/ac/e/
Printed circuit boards
Silicone tubing
Retortable pouches
©Panasonic Corporation 2019
lens
No. CE-LMDJ-3-2 July, 2019
Specifications are subject to change without notice.
LP-RC SERIES
2019.07
LP-400 SERIES
industrial.panasonic.com/ac/e/
LP-GS SERIES
LP-300 SERIES
Laser wavelength
380
Ultraviolet
region region
100
400
FAYb LASER MARKER
High-power Output and 3D-control Laser Marker
LP-M/MA SERIES
16w 40w 80w
120
500
330
220
Laser Processing
Applications
3D-control FAYb Laser Marker
LP-Z SERIES
FAYb Laser Marker
Laser Plastic
Welding
120
Alloy steel
330
Copper, brass
This all-round laser marker features 3D
rating and is capable of 3D marking.
marking capability and wide 300 x 300 mm
The laser interception mechanism and interlock are
(11.811 x 11.811 in) marking area.
M e t a l Aluminum alloys
Galvano Scanning System
Scanning Laser Processing Machine
Visible region
*The LP-MA series is introduced to only limited countries.
High-power Output FAYb Laser Marker
LP-S/SW SERIES
700
780
1,000
90
FAYb
FAYb Laser
1,060 nm
1,064 nm
1,070 nm
IP67G
Removable
Depression processing on metal
160
50w 100w
FAYb Laser Marker
LP-RF SERIES
200
90
5
Reliable hard design such as high
noise resistance controller and IP64
under a harsh condition such as an environment
rating head. Simple and easy
containing oil mist.
operation.
EP (Epoxy)
PA (Polyamide / nylon)
400
PBT (Polybutylene terephthalate)
PET (Polyethylene terephthalate)
PMMA (Acrylic)
POM (Polyacetal)
PP (Polypropylene)
Removal of coating film from gasket
PS (Polystyrene)
Engraving on die
uses a laser beam to generate heat
Laser beam
PU (Polyurethane)
Pressure
PVC (Polyvinyl chloride)
between adherends. For laser welding,
High-definition Laser Marker
LP-V SERIES
a transparent resin (permeable
material) and light absorbing resin
Permeable
material
Silicone resin
Ceramics
Others
Generally, to achieve a secure bond,
pressure between the materials is
required when lasing.
160
Deburring of metal parts
contrast marking on resin surfaces.
Removal of gold plating from
electronic parts
Infrared region
CO2 Laser Marker
Paper
●
Rubber
Plastic Welding Applications
1
LP-GS SERIES
5w
Film cutting
ABC
Resin gate cut
Safty light curtain: Case and front panel
Small
Minimized head size contributes to
operability. The high-grade LP-400 CO2
floor space c ost reduction.
laser marker delivers, meeting needs
Corresponding to the small size
ranging from marking to processing.
characters and 2D code.
Sensor: Case and Window for
communication signals
Consultation
We suggest the best model based on
your requirements.
4
Removal of ribbon cable insulation
Aluminum
PC (White)
PC (Black)
PMMA (Transparent)
PP (Black)
PS (Black)
PS (White)
■ CO
laser marker
2
●
●
●
●
●
●
PVC (White)
Glass epoxy
Epoxy
Glass
2
Testing and reporting
of test results
3
Demonstration
using actual equipment
Rubber gaskets cutting
Automotive sensor: Welding case
Discussion with the
customer
We report the test results by providing
a test marking report and marked
samples after testing with the actual
laser marker.
We provide a demonstration to check
that the marking quality and operation
are in accordance with your request.
5
6
Attendance during commissioning,
explanation of operating procedures
After-sales service
Microfluidic device: Welding flow path
Entry-Level Model CO2 Laser Marker
LP-RC SERIES
LP-300 SERIES
35w
10w
5
Copper
Compact CO2 Laser Marker
Performance, functionality, quality,
85
●
●
Steel
Laser marker installation process flow
160
High-speed Marking Type CO2 Laser Marker
●
●
Stainless steel (SUS)
* We can check marking results using actual workpieces provided by your company. For details, please contact our sales office nearest you.
CO2 LASER MARKER
110
Wood
Glass
Absorbing
material
LP-GS series
LP-300 series
* The above shows typical judgment results. Judgment results may differ when used on customers' workpieces.
This short pulse laser marker is suitable for high
55
●
UF (Urea)
(absorbing material) must be combined.
12w
10w 20w 30w 9.3μm
●
●
●
●
●
●
R e s i n PF (Phenol)
What is laser Welding?
Laser welding is a bonding method that
LP-400 SERIES
●
●
●
●
●
ABS (Acrylonitrile butadiene styrene)
PC (Polycarbonate)
The head is removable.
CO2 Laser
9,300 nm
10,600 nm
Gold, silver
PE (Polyethylene)
This model can be used for a marking operation
CO2
Nickel alloys
Removable
* The VL-W1 series is introduced to only limited countries.
The head features an IP67G rating.
90
Titanium alloys
Removable
SMART
High-performance Laser Marker
10,000
Processing of bearing surface
17w
Magnesium alloys
VL-W1 SERIES
This model realizes high productivity and safety.
LP-RC series
LP-400 series
＝Non-usable
■ FAYb laser marker
CO2 laser marker
●
●
●
●
●
●
●
●
Iron
Carbon steel
This high-end model features a head with an IP64
17w 42w
FAYb laser marker
13w 25w
SAFER
●=Good ○=Usable △=Incompatible
LP-M series LP-Z series
LP-S series LP-V series
LP-RF series
Material
redundantly equipped.
600
Material compatibility chart
We hold a meeting to discuss integration
specifications and the communication
between the laser marker and PLC.
50
Shorter marking times with speeds
Entry-level model for laser marking
1.4 times faster than before.
Cost-effective lasar marker
Corresponding to the high-speed line.
Wavelength
[nm]
Film driling
Insulation removal
ECU: Welding cover
Display: Welding water proof panel
In accordance with your request, we
provide support to install machines
and operate laser markers.
In accordance with your request, we
offer on-site maintenance service and
appropriate inspection service after
your unit is swapped with a
replacement unit.
Laser wavelength
380
Ultraviolet
region region
100
400
FAYb LASER MARKER
High-power Output and 3D-control Laser Marker
LP-M/MA SERIES
16w 40w 80w
120
500
330
220
Laser Processing
Applications
3D-control FAYb Laser Marker
LP-Z SERIES
FAYb Laser Marker
Laser Plastic
Welding
120
Alloy steel
330
Copper, brass
This all-round laser marker features 3D
rating and is capable of 3D marking.
marking capability and wide 300 x 300 mm
The laser interception mechanism and interlock are
(11.811 x 11.811 in) marking area.
M e t a l Aluminum alloys
Galvano Scanning System
Scanning Laser Processing Machine
Visible region
*The LP-MA series is introduced to only limited countries.
High-power Output FAYb Laser Marker
LP-S/SW SERIES
700
780
1,000
90
FAYb
FAYb Laser
1,060 nm
1,064 nm
1,070 nm
IP67G
Removable
Depression processing on metal
160
50w 100w
FAYb Laser Marker
LP-RF SERIES
200
90
5
Reliable hard design such as high
noise resistance controller and IP64
under a harsh condition such as an environment
rating head. Simple and easy
containing oil mist.
operation.
EP (Epoxy)
PA (Polyamide / nylon)
400
PBT (Polybutylene terephthalate)
PET (Polyethylene terephthalate)
PMMA (Acrylic)
POM (Polyacetal)
PP (Polypropylene)
Removal of coating film from gasket
PS (Polystyrene)
Engraving on die
uses a laser beam to generate heat
Laser beam
PU (Polyurethane)
Pressure
PVC (Polyvinyl chloride)
between adherends. For laser welding,
High-definition Laser Marker
LP-V SERIES
a transparent resin (permeable
material) and light absorbing resin
Permeable
material
Silicone resin
Ceramics
Others
Generally, to achieve a secure bond,
pressure between the materials is
required when lasing.
160
Deburring of metal parts
contrast marking on resin surfaces.
Removal of gold plating from
electronic parts
Infrared region
CO2 Laser Marker
Paper
●
Rubber
Plastic Welding Applications
1
LP-GS SERIES
5w
Film cutting
ABC
Resin gate cut
Safty light curtain: Case and front panel
Small
Minimized head size contributes to
operability. The high-grade LP-400 CO2
floor space c ost reduction.
laser marker delivers, meeting needs
Corresponding to the small size
ranging from marking to processing.
characters and 2D code.
Sensor: Case and Window for
communication signals
Consultation
We suggest the best model based on
your requirements.
4
Removal of ribbon cable insulation
Aluminum
PC (White)
PC (Black)
PMMA (Transparent)
PP (Black)
PS (Black)
PS (White)
■ CO
laser marker
2
●
●
●
●
●
●
PVC (White)
Glass epoxy
Epoxy
Glass
2
Testing and reporting
of test results
3
Demonstration
using actual equipment
Rubber gaskets cutting
Automotive sensor: Welding case
Discussion with the
customer
We report the test results by providing
a test marking report and marked
samples after testing with the actual
laser marker.
We provide a demonstration to check
that the marking quality and operation
are in accordance with your request.
5
6
Attendance during commissioning,
explanation of operating procedures
After-sales service
Microfluidic device: Welding flow path
Entry-Level Model CO2 Laser Marker
LP-RC SERIES
LP-300 SERIES
35w
10w
5
Copper
Compact CO2 Laser Marker
Performance, functionality, quality,
85
●
●
Steel
Laser marker installation process flow
160
High-speed Marking Type CO2 Laser Marker
●
●
Stainless steel (SUS)
* We can check marking results using actual workpieces provided by your company. For details, please contact our sales office nearest you.
CO2 LASER MARKER
110
Wood
Glass
Absorbing
material
LP-GS series
LP-300 series
* The above shows typical judgment results. Judgment results may differ when used on customers' workpieces.
This short pulse laser marker is suitable for high
55
●
UF (Urea)
(absorbing material) must be combined.
12w
10w 20w 30w 9.3μm
●
●
●
●
●
●
R e s i n PF (Phenol)
What is laser Welding?
Laser welding is a bonding method that
LP-400 SERIES
●
●
●
●
●
ABS (Acrylonitrile butadiene styrene)
PC (Polycarbonate)
The head is removable.
CO2 Laser
9,300 nm
10,600 nm
Gold, silver
PE (Polyethylene)
This model can be used for a marking operation
CO2
Nickel alloys
Removable
* The VL-W1 series is introduced to only limited countries.
The head features an IP67G rating.
90
Titanium alloys
Removable
SMART
High-performance Laser Marker
10,000
Processing of bearing surface
17w
Magnesium alloys
VL-W1 SERIES
This model realizes high productivity and safety.
LP-RC series
LP-400 series
＝Non-usable
■ FAYb laser marker
CO2 laser marker
●
●
●
●
●
●
●
●
Iron
Carbon steel
This high-end model features a head with an IP64
17w 42w
FAYb laser marker
13w 25w
SAFER
●=Good ○=Usable △=Incompatible
LP-M series LP-Z series
LP-S series LP-V series
LP-RF series
Material
redundantly equipped.
600
Material compatibility chart
We hold a meeting to discuss integration
specifications and the communication
between the laser marker and PLC.
50
Shorter marking times with speeds
Entry-level model for laser marking
1.4 times faster than before.
Cost-effective lasar marker
Corresponding to the high-speed line.
Wavelength
[nm]
Film driling
Insulation removal
ECU: Welding cover
Display: Welding water proof panel
In accordance with your request, we
provide support to install machines
and operate laser markers.
In accordance with your request, we
offer on-site maintenance service and
appropriate inspection service after
your unit is swapped with a
replacement unit.
Laser Marking Applications
Laser Marker
Selection Guide
FAYb Laser Marker
POWER
Engine block
Engine part
Cam shaft
LARGE SELECTION
Cast
LASER MARKER
Medical instruments
Battery housing
Laser diode
FAYb
Bearing
LASER MARKER
Precautions for Proper Use
Sensor
IC
Molded resin part
Molded resin part
Laser safety
• This product is classified as a Class 4 Laser Product in IEC/JIS/FDA regulations 21 CFR 1040.10 and 1040.11. Never look at or touch the direct laser
beam and its reflection.
LP-M/MA SERIES
• Handle the product according to the instruction given on the warning labels.(Warning labels are not shown in the product photographs in this catalog.)
CO2 Laser Marker
LP-Z SERIES
LP-S/SW SERIES
• The laser used by this product generates infrared light that is invisible to the human eye.
Use particular caution when the laser is operating.
Maintenance
• Air filter: Regularly clean the air filter attached to the Laser Marker to maintain cooling effects.
• Laser pointer emission port: Dust or chips adhering to the laser pointer emission port may affect the
printing quality or seriously damage the laser marker. Clean the laser pointer emission port regularly.
Recommended use of a dust collector
• Depending on the object being marked, harmful gasses or smoke that have a detrimental effect on the
human body or the laser marker may be generating during marking. If your application falls under this
description, use a dust collector.
POWER
PET bottle
Outer box(GS1datamatrix)
Coaster
Laser label (marking + half-cut)
LP-RF SERIES
*For more information, contact your sales representative.
LP-V SERIES
CO2
Disclaimer
LASER MARKER
The applications described in the catalog are all intended for examples only. The purchase of our products described in the catalog shall not be regarded as
granting of a license to use our products in the described applications. We do NOT warrant that we have obtained some intellectual properties, such as
patent rights, with respect to such applications, or that the described applications may not infringe any intellectual property rights, such as patent rights, of a
third party.
Please contact ..........
Ceramic capacitors
Connector
CD•DVD
Nameplate
Industrial Device Business Division
1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan
industrial.panasonic.com/ac/e/
Printed circuit boards
Silicone tubing
Retortable pouches
©Panasonic Corporation 2019
lens
No. CE-LMDJ-3-2 July, 2019
Specifications are subject to change without notice.
LP-RC SERIES
2019.07
LP-400 SERIES
industrial.panasonic.com/ac/e/
LP-GS SERIES
LP-300 SERIES