Uploaded by Chini Colmo

CSS 7 SUMMATIVE test with tos

advertisement
.
Republic of the Philippines
Department of Education
Western VI- Western Visayas
Division of Negros Occidental
VALLADOLID NATIONAL HIGH SCHOOL
Brgy. Palaka, Valladolid, Negros Occidental
SUMMATIVE TEST
ICT – CSS 7
S.Y 2019-2020
I. Direction: Encircle the letter of the correct answer.
1. Which tool is used for hardware to stand on to prevent static electricity from building up?
A. Anti-static mat
C. Philips head screwdriver
B. Hex driver
D. Wire cutter
2. Which tool is used to loosen or tighten cross-head screws?
A. Anti-static mat
C. Philips head screwdriver
B. Hex driver
D. Wire cutter
3. Which tool is sometimes called a nut driver? It is used to tighten nuts in the same way that a screwdriver tightens screws?
A. Anti-static mat
C. Philips head screwdriver
b. Hex driver
d. Wire cutter
4. Which tool is used to strip and cut wires?
A. Anti-static mat
C. Philips head screwdriver
B. Hex driver
D. wire cutter
5. What is a binary?
A. A sequence of 1s and 0s
C. The way a computer speaks
B. A code that is no longer used
D. Secret code used by technicians
6. What kind of 'base' system is binary known as?
A. Base 10
C. Base 2
B. Base 4
D. Base 16
7. What kind of number system is used in everyday life?
A. Denary
C. Binary
B. Nonary
D. a simple number system
8. What would the denary number 199 be in binary?
A. 11000110
C. 10100111
B. 11000111
D. 11101111
9. The only language which the computer understands is ______________
A. Assembly Language
C. Basic
B. Binary Language
D. C Language
10. The smallest unit of data in computer is ________________
A. Byte
C. Bit
B. Nibble
D. KB
11. A flowchart symbol that indicates both the starting point and the ending point of the process steps
A. Circle
C. Oval
B. Diamond
D. Triangle
12. A flowchart symbol that represents an individual step or activity in the process
A. Circle
C. Oval
B. Diamond
D. Box
13. It’s represented by a small rectangle with curved corners
A. Process
C. Process
B. Terminator
D. Decision
14. It is represented by a rectangle with double lines on each side
A. Sub-process
C. Process
B. Terminator
D. Decision
15. It’s represented by a diamond
A. Sub-process
C. Process
B. Terminator
D. Decision
16. It’s represented by a rectangle and refers to an action in a business process
A. Process
C. Sub-rocess
B. Terminator
D. Decision
17. A situation that has the potential to harm the health and safety of people.
A. Risk
C. hazard
B. Health
D. Condition
Identify the type of hazard:
18. Cables running across the floor
A. mechanical
C. Chemical
B. Physical
D. Electric Shock
19. Inkjet printer cartridge
A. mechanical
C. Chemical
B. Physical
D. Electric Shock
II. Direction: Identify the appropriate tool to use for each of the following.
_________________20. Equalize the electrical charge between you and the equipment.
_________________21. Tighten / loosen screw
_________________22. Tighten / looses bold with a hexagonal head
_________________23. Retrieve parts that may be hard to reach by your fingers
_________________24. Tighten / loosen a slotted screw
III. Identify if the following statements are TRUE or FALSE.
25. Another name for a flash disk is a thumb drive. - _______________
26. A flash drive is the least robust storage device. - _______________
27. An internal hard drive has the highest storage capacity. - _______________
28. A hard drive has a shorter life span than an SSD. - _______________
29. Cloud storage is for free for a specific amount. - _______________
30. Set the eye to screen distance that permits you to most easily focus on the screen. - _______________
31. The right lighting can reduce eyestrain, neck strain, and headaches. - _______________
32. When you type, hold your fingers, wrists, and lower arms in a straight line from your keyboard.
33. The computer desk should be deep enough to support your arms when you work at the computer. - ______________
34. Occupational hazards can’t be controlled by a variety of methods. - _______________
35. Occupational safety and health (OSH) is a planned system of working to promote illness and injury. - _____________
Prepared by:
CHINI N. DOMINGO
Teacher I
Republic of the Philippines
Department of Education
Western VI- Western Visayas
Division of Negros Occidental
VALLADOLID NATIONAL HIGH SCHOOL
Brgy. Palaka, Valladolid, Negros Occidental
DIAGNOSTIC TEST
TABLE OF SPECIFICATION
ICT – CSS 7
S.Y 2019-2020
No.
1
2
3
4
5
6
7
8
9
10
11
Competencies
Hand tools in computer hardware servicing
Inspect hand tools and equipment received
Safety procedures in using hand tools and equipment
Types of components and objects to be measured
Conversion and calculation
Basic symbols
Flowchart interpretation
Identify hazards and risks
Evaluate hazards and risks
Control hazards and risks
Maintain occupational health and safety regulations
TOTAL
No. of Item Test item Distribution
4
1, 2, 3,4
1
20
4
21, 22, 23, 24
5
25, 26, 27, 28, 29
6
5, 6, 7, 8, 9, 10
2
11, 12
4
13, 14, 15, 16
3
17, 18, 19
1
30
3
31, 32, 33
2
34, 35
35
Checked by:
EDENY G. GIGANAN
TLE Coordinator
Download