MANAGEMENT ADVISORY SEVICES REVIEWERS / TESTBANKS
1. The term "committed costs" refers to costs that
a. are likely to respond to the amount of attention devoted to them by a specified manager
b. are governed mainly by past decisions that established the present levels of operating and
organizational capacity and that only change slowly in response to small changes in capacity
c. fluctuate in total in response to small changes in the rate of utilization of capacity
d. management decides to incur in the current period to enable the company to achieve
objectives other than the filling of orders placed by customers
2. Which of the following is likely to be a discretionary cost in most organizations?
managerial training programs
factory utilities
a.
b.
c. managerial labor costs
d. factory rent
3. A cost driver
a.
b.
c.
d.
causes fixed costs to rise because of production changes
has a direct cause-effect relationship to a cost
can predict the cost behavior of a variable, but not a fixed, cost
is an overhead cost that causes distribution costs to change in distinct
increments with changes in production volume
4. Costs that are incurred for monitoring and inspecting are:
a.
b.
prevention costs
detection costs
c. appraisal costs
d. failure costs
5. The cost estimation method that gives the most mathematically precise cost production equation
is
a.
b.
The high-low method
The contribution margin method
c. The scatter-graph method
d. The regression analysis
6. A local JPIA chapter wants to rent a half for P3,000 a day to hold a Bingo fund raiser. Every session
of bingo requires a caller for P200. There are supplies that are needed that cost P3 per person
playing bingo. On average each bingo player spends P20 and 1,000 people attend each session.
P10,000 in prizes are awarded each session. Total cost for 1 session can be classified as:
Fixed Costs-Variable Costs
FixedCosts-Variable Costs
a.
P 13,200-P 3
c.
P 3,000-P 13,200
b.
P 13,200-P 3,000
d.
P 10,000-P 3,200
7. Which is not a common accounting classification of costs?
a.
b.
c.
d.
By the method of payment for the expenditure
By the objective of expenditure
By behavior
By the function incurring the expenditure
8. The principal advantage of the scatter-diagram method over the high-low method of cost
estimation is that the scatter-diagram method
a. includes costs outside the relevant range
b. considers more than two points
c. can be used with more types of costs than the high-low method
d. gives a precise mathematical fit of the points to the line
9. Which statement is true?
a.
b.
c.
d.
A variable cost remains constant on a per-unit basis as production increases
A fixed cost remains constant on a per-unit basis as production changes
The relevant range is valid for all levels of activity
An indirect cost can be easily traced to a cost object.
Pure Foods wishes to analyze the fixed and variable components of the semi-variable costs. The
following information is available:
Output
Output
Month Units
Costs
Month Units
Costs
January
1,000
P 12,000
April
800
P 11,000
February
700
10,000
May
1,400
18,750
March 1,100
14,000
June
1,200
15,000
10. Using the high-low method, which one of the following is correct. application
a. Variable costs is P 15 per unit
b. Variable costs is P 10 per unit
c. Fixed costs is P 1,250 per month
d. Fixed costs is P 1,000 per month
11. BSP Company earned P 100,000 on sales of P 1,000,000. It earned P 130,000 on sales of P
1,100,000. Total fixed costs are
a. P 0
b. P 200,000
c. P 420,000
12. Which of the following is a prevention cost?
a. Inspecting and testing materials
b. Packaging inspection
c. quality audits
d. cost of recalls
13. Which of the following costs is an internal failure cost?
a. Packaging inspection
c. quality engineering
d. P 900,000
b. Rework
d. lost sales
14. One of the ways managerial accounting differs from financial accounting is that managerial
accounting
is bound by generally accepted accounting principles
classifies information in different ways
does not use financial statements
deals only with economic events
a.
b.
c.
d.
15. Managerial accounting places considerable weight on:
a.
b.
c.
d.
generally accepted accounting principles
the financial history of the entity
ensuring that all transactions are properly recorded
detailed segment reports about departments, products and customers
16. The cost management function is usually under
a. the chief information officer
b. controller
c. purchasing manager
d. treasurer
17. Planning is a function that involves
a.
b.
c.
d.
hiring the right people for a particular job
coordinating the accounting information system
setting goals and objectives for an entity
analyzing financial statements
18. The treasurer function is usually not concerned with
investors relation
short-term financing
a.
b.
c. financial reports
d. credit extension and collection of
bad debts
19. The following characterized management advisory services, except
a.
b.
c.
d.
It involves decision for the future
It broader in scope and varied in nature
It utilizes more junior staff than senior members of the firm
It relates to specific problems where expert help is required
20. Under which ethical standard of conduct does the managerial accountant have the responsibility
to disclose fully all relevant information that could reasonably be expected to influence an
intended user’s understanding of the reports, comments and recommendations presented?
a.
Objectivity
b. competence
c. confidentiality
d.
integrity
Hanson Company manufactures two different types of receivers, a regular Model R and a special
features Model S. The company has limited resources. On an annual basis it has a total of 480
direct labor-hours and a total of 300 lbs. of material available for use in the manufacture of these
receivers. The company uses linear programming to determine a production schedule that will
maximize the company’s profit.
Based on the company’s current data on selling prices and production costs, it is estimated that
the sale of Model R will contribute P7 profit per unit and the sale of Model S will contribute P10
profit per unit. Resources used in the production of the two receivers are as follows. (Let Model S
= S and Model R = R.)
Model S
Model R
Raw materials used per unit
5 lbs.
3 lbs.
Labor used per unit
6 hours
4 hours
21. The objective function for Hanson Company can be expressed as
a.
5S + 3R < = 300
c. 6S + 4R < = 480
b.
Max = 7R + 10S
d. Min = 5S + 3 R
22. A beverage stand can sell either softdrinks or coffee on any given day. If the stand sells softdrinks
and the weather is hot; it will make P2,500; if the weather is cold, the profit will be P1,000. If the
stand sells coffee and the weather is hot, it will make P1,900; if the weather is cold, the profit will
be P2,000. The probability of cold weather on a given day at this time is 60%. The expected payoff
if the vendor has perfect information is:
a. P3,900
b. P1,360
c. P2,200
d. P1,960
23. Soft Inc. has a target total labor cost of P 3,600 for the first four batches of a product. Labor is paid
P10 an hour. If Soft expects an 80% learning curve, how many hours should the first batch take?
a.
360 hours
b. 140.63 hours
c. 57.6 hours
d. 230.4 hours
24. Critical Path Method (CPM) is a technique for analyzing, planning, and scheduling large, complex
projects by determining the critical path from single time estimate from each event in a project.
The critical path:
a. Is the shortest path from the first event to the last event for a project
b. Is an activity within the path that requires the most number of time
c. Has completion that reflects the earliest time to complete the project
d. Is the maximum amount of time an activity may be delayed without delaying the total project
beyond its target completion time
25. A company is designing a new regional distribution warehouse. To minimize delays in loading and
unloading trucks, an adequate number of loading docks must be built. The most relevant
technique to assist in determining the proper number docks is
a. Cost-volume-profit analysis
c. PERT / CPM analysis
b. Queuing theory
d. Linear programming
AJ Construction Inc. is considering a three-phase research project. The time estimates for
completion of Phase 1 of the project are:
Pessimistic
29 weeks
Most likely
25 weeks
Optimistic
15 weeks
26. Using the program evaluation and review technique (PERT), the expected time for completion of
Phase 1 should be
a.
20 weeks
b. 19 weeks
c. 18 weeks
d. 24 weeks
Moon, Inc. manufactures product X and product Y, which are processed as follows:
Type A machine
Type B machine
Product X
6 hours
4 hours
Product Y
9 hours
5 hours
27. The contribution margin is P12 for product X and P7 for product Y. The available time daily for
processing the two products is 120 hours for machine Type A and 80 hours for machine Type B.
What is the best combination of product that will maximize profit?
a. 10X, 10Y
b. 15X, 5Y
c. 20X, 0Y
d. 0X, 20Y
28. Linear programming is used most commonly to determine
a.
b.
c.
d.
The fastest timing
The best use of scarce resources
The most advantageous prices
The mix of variable that will result in the largest quantity
The network below describes the interrelationships of several activities necessary to complete a
project. The arrows represent the activities. The numbers between the arrows indicate the
number of months to complete each activity.
2
2
4
4
4
1
5 End
Start
6
2
3
5
6
4
29. The shortest time to complete the project is
a. 10 months
b. 12 months
c. 16 months
d. 28 months
30. Super Company is preparing 2011 budget and, taking into consideration the recent pace of
economic recovery, has developed several sales forecasts and the estimated probability
associated with each sales forecasts. To determine the sales forecasts to be used for 2011
budgeting purposes, which of the following techniques should Super use?
a. Expected value analysis
b. Continuous probability simulation
c. Monte Carlo simulation
d. Sensitivity Analysis
31. The expected value of perfect information is the
a. Difference between the expected profit under certainty and the expected monetary value of
the best act under uncertainty.
b. Difference between the expected profit under certainty and the expected opportunity loss
c. Sum of the conditional profit (loss) for the best event of each act times the probability of each
events occurring
d. Same as the expected profit under certainty
A dough distributor has decided to increase its daily muffin purchases by 100 boxes. A box of
muffins costs P 2 and sells for P 3 through regular stores. Any boxes not sold through regular stores
are sold through Dough’s thrift store for P 1. Dough assigns the following probabilities to selling
additional boxes.
Additional sales
probabilities
60
.40
100
.60
32. What is the expected value of Dough’s decision to buy 100 additional boxes of muffins?
a. P 28
b. P 40
c. P 52
d. P 68
33. As a company becomes more conservative with respect to working capital policy, it would tend to
have a(n)
a. Increase in the operating cycle.
b. Decrease in the operating cycle.
c. Increase in the ratio of current assets to current liabilities.
d. Increase in the ratio of current liabilities to noncurrent liabilities.
34. Temporary working capital supports
a. The cash needs of the company
b. Acquisition of capital equipment
c. Payment of long term debt.
d. Seasonal peaks
35. Zap Company follows an aggressive financing policy in its working capital management while Zing
Corporation follows a conservative financing policy. Which one of the following statements is
correct?
a. Zap has a low current ratio while Zing has a high current ratio.
b. Zap has less liquidity risk while Zing has more liquidity risk.
c. Zap finances short-term assets with long term debt while Zing finances short-term assets with
short-term debt.
d. Zap has low ratio of short-term debt to total debt while Zing has a high ratio of short-term
debt to total debt.
36. All of these factors are used in credit policy administration, except:
a. Credit standards
b. Peso amount of receivables
c. Terms of trade
d. Collection policy
37. The use of safety stock by a firm will:
a. Reduce inventory costs
b. Have no effect on inventory costs
c. Increase inventory costs
d. None of the above
38. Which of the following statements is correct for a firm that currently has total costs of carrying
and ordering inventory that is 50% higher than total carrying costs?
a. Current order size is greater than optimal
c. Current order size is less than
optimal
b. Per unit carrying costs are too high
d. The optimal order size is currently
being used
39. The Spades Company has an inventory conversion period of 75 days, a receivables conversion
period of 38 days, and a payable payment period of 30 days. What is the length of the firm’s cash
conversion cycle?
a. 83 days
b. 113 days
c. 67 days
d. 45 days
40. Samaritan Supplies, Inc. has P5 million in inventory and P2 million in accounts receivable. Its
average daily sales are P100,000. The company has P1.5 million in accounts payable. Its average
daily purchases are P50,000. What is the length of the company’s inventory conversion period?
a. 120 days
b. 90 days
c. 50 days
d. 40 days
41. Rawson Corporation’s order quantity for Material T is 5,000 lbs. If the company maintains a safety
stock of T at 500 lbs., and its order point is 1,500 lbs. What is the lead time assuming daily usage is
50 lbs.?
a. 30 days
b. 100 days
c. 10 days
d. 20 days
42. Refer to # 16; what would be the total annual carrying costs assuming the carrying cost per unit is
P8.40?
a. P 42,000
b. P 25,200
c. P 4,200
d. P 46,200
43. Simile Inc. has a total annual cash requirement of P 9,075,000 which is to be paid uniformly. Simile
has the opportunity to invest the money at 24% per annum. The company spends, on the average,
P40 for every cash conversion to marketable securities. What is the optimal cash conversion size?
a. P55,000
b. P60,000
c. P45,000
d. P75,500
44. Palm Company’s budgeted sales of the coming year are P 40,500,000 of which 80% are expected
to be credit sales at terms of n/30. Palm estimates that a proposed relaxation of credit standards
will increase credit sales by 20% and increase the average collection period from 30 days to 40
days. Based on a 360-day year, the proposed relaxation of credit to standards will result in an
expected increase in the average accounts receivable balance of
a. P540,000
b. P900,000
c.P2,700,000
d. P1,620,000
45. If a firm is given a trade credit terms of 2/10, net 30, then the cost to the firm failing to take the
discounts and pay instead its obligation at the end of the maturity date is:
a. 2%
b. 30%
c. 36.7%
d. 10%
46.) Depreciation is incorporated explicitly in the discounted cash flow analysis of an investment proposal
because it
A. Is a cash inflow.
B. Is a cost of operations that cannot be avoided.
C. Reduces the cash outlay for income taxes.
D. Represents the initial cash outflow spread over the life of the investment.
47.) Assume that the old equipment must be sold in order to purchase the new equipment. Given a
constant effective corporate income tax rate and straight-line depreciation on both disposed and newly
purchased pieces of equipment, the depreciation tax shield during the later years of a capital project,
assuming the old equipment was not yet fully depreciated when it was disposed of, is generally
A.) Less than that during the earlier years.
B.) Not determinable from the information given.
C.) Greater than that during the earlier years.
D.) The same as that during the earlier years.
48.) Future, Inc. is in the enviable situation of having unlimited capital funds. The best decision rule, in an
economic sense, for it to follow would be to invest in all projects in which the
a.) Internal rate of return is greater than zero.
b.) Net present value is greater than zero.
c.) Accounting rate of return is greater than the earnings as a percent of sales.
d.) Payback reciprocal is greater than the internal rate of return.
49.) Kore Industries is analyzing a capital investment proposal for new equipment to produce a product
over the next 8 years. The analyst is attempting to determine the appropriate "end-of-life" cash flows for
the analysis. At the end of 8 years, the equipment must be removed from the plant and will have a net
book value of zero, a tax basis of P75,000, a cost to remove of P40,000, and scrap salvage value of
P10,000. Kore’s effective tax rate is 40%. What is the appropriate "end-of-life" cash flow related to these
items that should be used in the analysis?
a.
b.
c.
d.
P27,000 inflow
P18,000 outflow
P45,000 outflow
P12,000 inflow
50.) Barker, Inc. has no capital rationing constraint and is analyzing many independent investment
alternatives. Barker should accept all investment proposals
a.
b.
c.
d.
That provide returns greater than the before-tax cost of debt.
That have a positive net present value.
If debt financing is available for them.
That have positive cash flows.
51.) The rankings of mutually exclusive investments determined using the internal rate of return method
(IRR) and the net present value method (NPV) may be different when
a.
b.
c.
d.
The lives of the multiple projects are equal and the size of the required investments is equal.
The required rate of return equals the IRR of each project.
The required rate of return is higher than the IRR of each project.
Multiple projects have unequal lives and the size of the investment for each project is different.
52. All of the following items are included in discounted cash flow analysis except
a.
b.
c.
d.
Future operating cash savings.
The future asset depreciation expense.
The current asset disposal price.
The tax effects of future asset depreciation.
53.) A firm is considering a capital project for which the following information is available: An existing
piece of equipment that would be disposed of to make room for new equipment has a historical cost of
P370,000. It has a salvage value of P10,000 and has been depreciated on a straight-line basis for 16 of the
estimated 18 years of its useful life. The new equipment has a cost of P500,000 and the firm expects it will
have to devote P20,000 in cash and P24,000 in accounts receivable to the new project. The firm’s
effective tax rate is 40%. The required net initial investment in the new project is
a.
b.
c.
d.
P534,000
P518,000
P544,000
P498,000
54.) If income tax considerations are ignored, how is depreciation handled by the following capital
budgeting techniques?
A. Excluded...Included...Excluded
C. Included...Excluded...Included
B. Excluded...Excluded...Included
D. Included...Included...Included
55. The following are inherent to management accounting:
1. External report
2. Historical information
3. Contribution approach income statement
4. Generally accepted accounting principle
5. prospective financial statements
a. All of them
b. 2,3,5
c. 3,5
d. 1.2,5
56. What is the study of the need for activities and whether they are operating efficiently called?
a. Direct and indirect cost management
b. Activity-based management
c. Variable and fixed cost management
d. Total quality management
57. Which of the following is the appropriate procedure to apply overhead to production using normal
costing?
a. Assign actual direct material and direct labor costs plus an amount representing “normal”
manufacturing overhead to products.
b. Assign “normal” direct material and direct labor costs plus an amount representing “normal”
manufacturing overhead to products.
c. Assign actual direct material and direct labor costs plus an amount representing “normal”
manufacturing overhead to products.
d. All of the above answers are correct.
58. PJ Company’s direct labor is 30% of its conversion cost. If the direct materials costs last week was
P52,500 and the manufacturing overhead cost was P21,000, compute the cost of the direct labor for
the week.
a. P75,000
b. P9,000
c. P30,000
d. P6,300
Questions 5 through 8 are based on the following information: Elvin Corporation manufactures and sells
T-shirts inspired with college names and slogans. Last year, the shirts sold for P7.50 each, and the variable
expenses was P2.25 per unit. The company needed to sell 20,00 shirts to breakeven. The net operating
income last year was P8,400. Elvin’s expectations for the coming year include the following:
- The selling price of the t-shirts would be P9.00
-
Variable expenses would increase by one-third.
Fixed expenses will increase by 10%.
59. The number of t-shirts Elvin Corporation must sell to breakeven in the coming year is:
b. 17,500
b. 19,250
c. 20,000
d. 22,000
60. Sales for the coming year are expected to exceed last years by 1,000 units. if this occurs, Elvin’s sales
volume in the coming year will be:
c. 22,600 units
b. 21,960 units
c. 23,400 unitsd. 21,000 units
61. If Elvin wishes to earn P22,500 in net operating income for the coming year, the company’s sales
volume in pesos must be:
d. 217,750
b. P257,625
c. P207,000
d. P229,500
62. The selling price needed next year to maintain the same contribution margin ratio as last year is:
e. P9.00
b. P8.25
c. P10.00
d. P9.75
63. W Company had a net operating income of P75,000 using variable costing and a net operating income
of P57,000 using absorption costing. Variable production costs were P15 per unit. Total fixed
manufacturing overhead was P120,000 and 10,000 units were produced. During the year, the
inventory level:
f. Increased by 1,200 units.
c. Decreased by 1,500 units.
g. Increased by 1,500 units.
d. Decreased by 1,200 units.
64. An activity-based costing system that is designed for internal decision-making will not conform to
generally accepted accounting principles because:
h. Some manufacturing costs (the cost of idle capacity and organization sustaining costs) will not be
assigned to products.
i. Some nonmanufacturing costs are assigned to products.
j. First-sage allocation may be based on subjective interview data.
k. All of the above are reasons why an activity-based costing system that is designed for internal
decision-making will not conform to generally accepted accounting principles.
65. JKL Company has a standard of 15 parts of component X costing P1.50 each. JKL purchases 14,010
units of component X for P22,125. JKL generated a P220 favorable price variance and a P3,375
favorable quantity variance. If there were no changes in the component inventory, how many units of
finished product were produced?
a. 994 units
b. 1,650 units
c. 1,000 units
d. 1,160 units
66. Shown below is the sales forecast for C Inc., for the first four months of the coming year:
Jan
Feb
Mar
Apr
Cash Sales
P15,000
P 24,000
P 18,000
P 14,000
Credit Sales
100,000
120,000
90,000
70,000
On average, 50% of credit sales are paid for in the month of the sale, 30% in the month following
sale, and the remainder is paid two months after the month of the sale. Assuming there are no bad
debts, the expected cash inflow in March is:
l. P138,000
b. P122,000
c. P119,000
d. P108,000
67. T Company budgeted sales on account of P120,000 for July, P211,000 for August, and P198,000 for
September. Collection experience indicates that none of the budgeted sales will be collected in the
month of the sale, 60% will be collected the month after the sale, 36% in the second month, and 4%
will be uncollectible. The cash receipts from accounts receivable that should be budgeted for
September would be:
a.P169,800
b. P147,960
c. P197,880
d.P194,860
68. P Company budgets on an annual basis for its fiscal year. The following beginning and ending
inventory levels (in units) are planned for the next year:
Beginning
Ending
Raw Materials
40,000
50,000
Finished goods
80,000
50,000
Three pounds of materials are needed to produce each unit of finished product. If P Company plans to
sell 480,000 units during next year, the number of units it would have to manufacture during the year
would be
m.440,000 units
b. 480,000 units
c. 510,000 units
d. 450,000 units
69. B Company is preparing its budget for 2006. For 2005, the following were reported:
Sales (100,000 units)
Cost of goods sold
Gross profit
Operating expenses*
Net Income
*including depreciation of P40,000
P1,000,000
600,000
400,000
240,000
P 160,000
Selling prices will increase by 10% and sales volume in units will decrease by 5%. The cost of goods
sold as a percent of sales will increase to 62%. Other than depreciation, all operating costs are
variable. B will budget a net income for 2006 of
a.
P167,100
b. P167,500
c. P168,000
d.
P176,000
Questions 16 through 19 are based on the following information: A Industries employs a standard cost
system in which direct materials inventory is carried at standard cost. A has established the following
standards for the prime costs of one unit of product.
Standard Quantity
Standard Price
Standard Cost
Direct materials
8 pounds
P1.80 per pound
14.40
Direct labor
0.25 hour
P8.00 per hour
2.00
During May, A purchased 160,000 pounds of direct materials at a cost of P304,000. The total direct
labor for May were P37,800. A manufactured 19,000 units of product during May using 142,500
pounds of direct materials and 5,000 direct labor hours.
70. The direct materials price variance for May is
a. P16,000 F
b. P16,000 UF c. P14,250 F
d. P14,250 UF
71. The direct materials quantity variance for May is
a. P14,400 UF
b. P1,100 F
c. P17,100 UF
d. P17,100 F
72. The direct labor rate variance for May is
a. P2,200 F
b. P1,900 UF
c. P2,000 UF
d. P2,090 F
73. The direct labor efficiency variance for May is
a. P2,200 F
b. P2,000 F
c. P2,000 UF
d. P1,800 UF
F Glass Works uses a standard cost system in which manufacturing overhead is applied to units of product
on the basis of direct labor-hours. Each unit requires two standard hours of labor for completion. The
denominator activity for the year was based on budgeted production of 200,000 units. Total overhead
was budgeted at P900,000 for the year, and the fixed overhead rate was P3.00 per unit. The actual data
pertaining to the manufacturing overhead for the year are presented below:
Actual production
198,000 units
Actual DLH
440,000
Actual variable overhead
P352,000
Actual fixed overhead
P575,000
74. The standard hours allowed for actual production for the year total
a. 247,500
b. 396,000
c. 400,000
d. 495,000
75. F’s variable overhead efficiency variance for the year is
a. P33,000 UF
b. P35,200 F
c. P35,200 UF
d. P3,000 F
76. F’s variable overhead spending variance for the year is
a. P20,000 UF
b. P22,000 F
c. P22,000 UF d. P20,000 F
77. F’s fixed overhead budget variance for the year is
a. P19,000 F
b. P25,000 F
c. P25,000 UF
d. P19,000 UF
78. The fixed overhead applied in F’s production for the year is
a. P484,200
b. P575,000
c. P594,000
d. P800,000
79. F’s overhead volume variance for the year is
a. P6,000 UF
b. P19,000 F
d. P55,000 UF
c. P25,000 F
80. Following is information relating to K Company’s X Division last year:
Sales
P500,000
Variable expenses
300,000
Traceable fixed expenses
50,000
Average operating assets
100,000
Minimum required rate of return
6%
X’s residual income was
a. P144,000
b. P150,000
c. P156,000
d. P200,000
81. CDE Company manufactures communication satellites used in TV in signal transmission. The firm
currently purchases one component for its satellite from a European firm. A CDE engineering team has
found a way to use the company’s own component, namely Part No. A200 instead of the European
component. However, the CDE component must be modified at a cost of P500 per part. The European
component costs P8,900 per part. CDE’s part no A200 costs P5,100 before it is modified. CDE currently
uses 10 of the European component per year. How much is the annual differential cost between CDE’s
two production alternatives?
a. P33,000
b. P37,000
c.P34,000
d. P35,000
82. M Company plans to discontinue a department that has a contribution margin of P24,000 and P48,000
in fixed costs. Of the fixed costs, P21,000 cannot be eliminated. The effect of this discontinuance on
M’s net operating income would be a(n)
a. Decrease of P3,000
c. Decrease of P24,000
b. Increase of P3,000
d. Increase of P24,000
The T Company has 500 obsolete microcomputers that are carried in inventory at a total cost of P720,000.
If these microcomputers are upgraded at a total cost of P100,000, they can be sold for a total of
P160,000. As an alternative, the microcomputers can be sold in their present condition for P50,000.
83. The sunk cost in this situation
a. P720,000
b. P160,000
c. P50,000
d. P100,000
84. What is net advantage or disadvantage to the company from upgrading the computers rather than
selling in their present condition?
a. P110,000 advantage
c. P10,000 advantage
b. P660,000 disadvantage
d. P60,000 advantage
85. Suppose the selling price of the upgraded computers has not been set. At what selling price per unit
would the company be as well off upgrading the computers as if it just sold the computers in their
present condition?
a. P100
b. P770
c. P300
d. P210
86. F Caterers quotes price of P60 per person for a dinner party. This price includes the 6% sales tax and
the 15% service charge. Sales tax is computed on the food plus service charge. The service charge is
computed on the food only. At what amount does F Caterers price the food?
a. P55.40
b. P50.00
c.P47.40
d. P49.22
87. Which is NOT a common accounting classification of costs?
a. By the method of payment for the expenditure.
b. By the objective of expenditure.
c. By behavior.
d. By the function incurring the expenditure.
88. Introducing income taxes into cost-volume-profit analysis
a. raises the break-even point.
b. lowers the break-even point.
c. increases unit sales needed to earn a particular target profit.
d. decreases the contribution margin percentage.
89. The principal advantage of the scatter-diagram method over the high-low method of cost estimation is
that the scatter-diagram method
a. includes costs outside the relevant range.
b. considers more than two points.
c. can be used with more types of costs than the high-low method.
d. gives a precise mathematical fit of the points to the line.
90. Looking at the following scatter diagrams we can conclude that
$
$
|
**
|
**
|
* **
|
** *
|
*** *
| * *
|
* *
| **
|
|
|
|
|__________________
|__________________
activity
activity
Cost A
Cost B
a. cost A will be easier to predict than cost B.
b. cost B will be easier to predict than cost A.
c. cost A is out-of-control.
d. cost B has no fixed component.
91.
The cost to repair a unit of product that fails after it is sold is a(n)
a. appraisal cost.
b. external failure cost.
c. internal failure cost.
d. prevention cost.
92. Genco manufactures two versions of a product. Production and cost information show the following:
Model A
Model B
Units produced
200
400
Material moves (total)
20
Direct labor hours per unit
80
1
2
Material handling costs total $200,000. Under ABC, the material handling costs allocated to each unit
of Model A would be:
a. $10
b. $200
c. $333
d. Some other number
93. Buchanan Company currently sells 4,000 units of product Q for $1 each. Capacity is 5,000 units.
Variable costs are $0.40 and avoidable fixed costs are $400. A chain store has offered $0.80 per
unit for 400 units of Q. If Buchanan accepts the order, the change in income will be a
a. $60 decrease.
b. $80 decrease.
c. $160 increase.
d. $480 increase.
94. An imposed budget
a. is the same as a static budget.
b. can lead to poor performance.
c. is best for planning purposes.
d. eliminates the need for a sales forecast.
95. If the present value of the future cash flows for an investment equals the required investment, the IRR
is
a. equal to the cutoff rate.
b. equal to the cost of borrowed capital.
c. equal to zero.
d. lower than the company's cutoff rate of return.
96. Which of the following combinations is possible?
Profitability Index
NPV
IRR
-------------------------- ------------------------a. greater than 1 positive
equals cost of capital
b. greater than 1 negative
less than cost of capital
c. less than 1
negative
less than cost of capital
d. less than 1
positive
less than cost of capital
97. Altoona Company is considering replacing a machine with a book value of $200,000, a remaining
useful life of 4 years, and annual straight-line depreciation of $50,000. The existing machine has a
current market value of $175,000. The replacement machine would cost $320,000, have a 4 year
life, and save $100,000 per year in cash operating costs. If the replacement machine would be
depreciated using the straight-line method and the tax rate is 40%, what would be the increase in
annual income taxes if the company replaces the machine?
a. $28,000
b. $40,000
c. $42,000
d. $64,000
98. Direct, step-down, and reciprocal are names for
a. the allocation methods most likely to produce goal congruence.
b. transfer-pricing methods.
c. methods for allocating costs of service departments to operating departments.
d. alternative organizational structures.
99. Cascade Company had the following results in June.
Planned
Actual
------- ------Sales
$80,000 $78,900
Variable costs
50,000
48,500
------- ------Contribution margin $30,000 $30,400
======= =======
Planned sales were 10,000 units; actual sales were 9,700 units. The sales price variance is
a. $1,100 U.
b. $1,000 F.
c. $900 U.
d. $400 F.
100. Alcatraz Division of XYZ Corp. sells 80,000 units of part X to the outside market. Part X sells for $40,
has a variable cost of $22, and a fixed cost per unit of $10. Alcatraz has a capacity to produce
100,000 units per period. Capone Division currently purchases 10,000 units of part X from Alcatraz
for $40. Capone has been approached by an outside supplier willing to supply the parts for $36.
What is the effect on XYZ's overall profit if Alcatraz REFUSES the outside price and Capone decides
to buy outside?
a. no change
b. $140,000 decrease in XYZ profits
c. $80,000 decrease in XYZ profits
d. $40,000 increase in XYZ profits
101. Filter Company's budget for overhead costs is:
total overhead cost = $50,000 + ($4 x direct labor hours)
Standard direct labor time is 1.5 hours per unit of product. The standard wage rate is $6 per hour.
Standard variable overhead cost for a unit of product is
a. $4.00.
b. $6.00.
c. $9.00.
d. $10.00.
102. Chippewa paid $32,225 to direct labor for the production of 1,700 units. Standards allow 3 labor
hours per unit at a rate of $6.50 per hour. Actual hours totaled 5,150. The direct labor rate
variance was
a. $1,250 favorable
b. $925 favorable
c. $325 favorable
d. $325 unfavorable
103. A company using activity-based overhead rates
a. will usually have higher budget variances than one using a single rate.
b. will usually have higher volume variances than one using a single rate.
c. cannot compute fixed and variable components of overhead cost.
d. should have better information for planning and control than one using a single rate.
104. Variable costing and absorption costing will show the same incomes when there are no
a. beginning inventories.
b. ending inventories.
c. variable costs.
d. beginning and ending inventories.
105. Madison Industries manufactures a single product using standard costing. Variable production costs
are $26 and fixed production costs are $250,000. Madison uses a normal activity of 12,500 units to
set its standard costs. Madison began the year with 1,000 units in inventory, produced 11,000
units, and sold 11,500 units. The standard cost of goods sold under variable costing would be
a. $230,000.
b. $299,000.
c. $506,000.
d. $529,000.
106. Backflushing, or backflush costing
a. requires significantly less recordkeeping than other methods.
b. can be used by any company.
c. ignores inventories.
d. does not distinguish between materials and conversion costs.
107. Which of the following will not impair the independence of a CPA in the rendition of Management
Services?
a. The CPA performs decision-making services for his client.
b. The CPA performs services wherein he is in effect, acting as an employee of the client.
c. The CPA loses his objectivity and acts in a manner as if he is advocating for the interest of his
client.
d. The CPA does not extend his services beyond the presentation of recommendations or giving
of advice.
108.
The type of data processing in which remote terminals provide direct access to the computer is
a. On-line processing
c. Batch processing
b. Remote processing
d. Central processing
109.
Sequential access means that
a. Data are stored on magnetic tape.
b. The address of the location of data is found through the use of either an algorithm or an
index.
c. Each record can be accessed in the same amount of time.
d. To read record 500, records 1 through 499 must be read first.