MATERIAL SAFETY DATA SHEET
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name:
ELECTROCLEAN SOLUTION
Product Code:
6911-1321 & 6911-3321
Manufacturer:
Address:
Automated Production Equipment Corporation
142 Peconic Avenue
Medford, NY 11763, USA
(631) 654-1197 (Mon-Fri, 9 am - 5 pm EST)
(631) 289-4735
Telephone:
Fax:
Emergency Response 24-hour Telephone:
CHEMTREC
United States: (800) 424-9300
International: (703) 527-3887 (collect)
Effective Date: Nov 4, 2002
2. COMPOSITION, INFORMATION ON INGREDIENTS
RTECS #
WB4900000
ZC0110000
CAS #
1310-73-2
7732-18-5
Chemical Name
Sodium Hydroxide
Water
Wt. %
1-5
95 - 99
3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Clear, odorless liquid.
Danger! Corrosive to skin, eyes, and respiratory system.
Environmental hazard.
Emergency Response Guidebook
Guide #154
POTENTIAL HEALTH EFFECTS
TARGET ORGANS:
Skin, eyes, respiratory system.
PRIMARY ROUTES OF ENTRY:
Skin/eye contact, inhalation, ingestion.
EYE:
Corrosive to the eyes and may cause severe eye damage.
SKIN CONTACT:
Causes skin irritation. May cause skin burns.
SKIN ABSORPTION: Substance does not absorb through the skin.
INHALATION:
Irritating to the eyes, nose, throat, and lungs. May
cause sneezing, watering of eyes, nasal discharge, coughing.
INGESTION:
May cause severe and permanent damage to
mouth, throat, and stomach.
MSDS
6911-1321 & 6911-3321
Page 1 of 6
CHRONIC EFFECTS: Prolonged or repeated exposure may cause chronic
dermatitis.
KNOWN OR POTENTIAL CARCINOGEN:
National Toxicology Program :
No
I.A.R.C. Monographs :
No
OSHA:
No
ACGIH:
No
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY
EXPOSURE:
Preexisting skin and eye conditions; respiratory
system disorders.
4. FIRST AID MEASURES
First aid providers must take proper precautions for their own safety before
entering contaminated areas to assist chemical accident victims and handling
their contaminated clothing and equipment. Another person should
immediately call the Emergency Medical Service, 911-Operator, Hospital,
Physician, Ophthalmologist or Poison Control Center, as applicable. Give the
following information: Location of the accident, your phone number, description
of the accident, name of chemical agent and product, number and condition of
casualties, what is being done for the victims. Stay on the phone until the other
party hangs up! Remove victim from contaminated area to a clean, quiet,
ventilated area. Calm and reassure him, keep him warm.
EYES:
Hold eyelids apart and flush eyes with plenty of water for
at least 15 minutes.
SKIN:
Immediately flush skin with plenty of water for at least
15 minutes while removing contaminated clothing and shoes. Thoroughly
decontaminate (or discard) clothing and shoes.
INHALATION:
Remove to fresh air. Lay victim down, legs raised. Loosen
tight clothing, cover with a blanket. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen.
INGESTION:
DO NOT induce vomiting, unless advised by EMS. Give
victim large quantities of water or milk with 1-2 fresh eggs. Give a glass
of 1/3 vinegar with 2/3 water. Never give anything by mouth to an
unconscious person.
5. FIRE FIGHTING MEASURES
FLAMMABLE PROPERTIES:
Flash point (Method Used):
Flammable Limits:
Autoignition temperature:
EXTINGUISHING MEDIA:
MSDS
6911-1321 & 6911-3321
Material will not burn.
LFL: None
N.A.
All
UFL: None
Page 2 of 6
FIRE-FIGHTING EQUIPMENT:
NIOSH/MSHA approved positivepressure self-contained breathing apparatus. Structural fire fighters’
protective clothing may not provide adequate protection.
FIRE AND EXPLOSION HAZARDS: Containers can build up pressure and
burst if exposed to heat (fire). Water runoff can cause environmental
damage. Dike area for later disposal.
NFPA - 704M System:
Health:
3
Flammability:
0
Reactivity
0
6. ACCIDENTAL RELEASE MEASURES
IN CASE OF A SPILL:
Do not touch or walk through spilled
material. Isolate hazard area and keep people away. Notify your facility
emergency coordinator. Eliminate all sources of ignition. Provide maximum
ventilation. Do not release into soil, sewers, or natural bodies of water. Wear
proper personal protective equipment (PPE). Carefully mop up or vacuum
spill and triple rinse with water into suitable plastic container. Release of a
reportable quantity (RQ) requires notification of proper authorities. Dispose
of according to local, state, and federal regulations.
NEUTRALIZING AGENT:
Dilute Hydrochloric Acid (6M)
7. HANDLING AND STORAGE
HANDLING:
Use "buddy system" when working with chemicals.
Do not get in eyes, on skin, on clothing. Do not breathe vapor, mist or gas.
Use with adequate ventilation. Wash thoroughly after handling. Triple rinse
container clean before discarding. Put nothing else in this container.
STORAGE:
Keep container tightly closed in upright position.
Store at 60-90°F away from incompatible materials and physical hazards. Do
not remove or deface container labels.
8. EXPOSURE CONTROLS/ PERSONAL PROTECTION
ENGINEERING CONTROLS:
Local exhaust ventilation is required
to meet the permissible exposure limits (PEL) during the use of this product.
RESPIRATORY PROTECTION:
If engineering controls are not
feasible, the respiratory protection program must comply with OSHA 29 CFR
1910.134.
SKIN PROTECTION:
Nitrile, neoprene, vinyl, latex gloves. Impervious
boots, apron, protective clothing as required by job conditions.
EYE PROTECTION:
Face shield and safety glasses w/side shields or
splash-proof chemical goggles. Do not wear contact lenses. Eye wash station,
safety shower, washing facilities near work area.
MSDS
6911-1321 & 6911-3321
Page 3 of 6
EXPOSURE LIMITS:
Agencies
OSHA
Limits
PEL/TWA
STEL
Ceiling
ACGIH
TLV/TWA
STEL
Ceiling
NIOSH
REL/TWA
IDLH
Units
mg/m3
ppm
mg/m3
ppm
mg/m3
ppm
mg/m3
ppm
mg/m3
ppm
mg/m3
ppm
mg/m3
ppm
mg/m3
ppm
Hazardous Ingredients
Sodium
Hydroxide
2
Skin
Designation
2
2
10
No
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Odor:
pH:
Specific gravity:
Vapor pressure:
Vapor density:
Evaporation rate:
Colorless liquid
None
12 – 14
1.044 - 1.054
N.A.
N.A.
<1
(ethyl ether =1)
Boiling point:
Freezing/Melting point:
Solubility in water:
10.
>100°C; >212°F
< 0°C; <32°F
Complete
STABILITY AND REACTIVITY
Stability (Conditions to avoid):
Incompatibility (Materials to avoid):
Hazardous Decomposition Products:
Hazardous Polymerization:
MSDS
6911-1321 & 6911-3321
Stable under normal ambient conditions.
Avoid contact with amphoteric metals,
strong acids, anhydrides, aldehydes.
Na2O
Will not occur
Page 4 of 6
11.
TOXICOLOGICAL INFORMATION
Not available
12.
ECOLOGICAL INFORMATION
Not available
13.
DISPOSAL CONSIDERATIONS
Ship to approved treatment/disposal facility.
Dispose of according to local, state, and federal regulations.
EPA Waste I.D. Number: D002
Follow the applicable regulations for disposal of empty containers and rinsate.
The disposal information applies to the material as manufactured.
Contamination may affect the disposal requirements. The responsibility for
proper waste disposal is with the generator of the waste.
14.
TRANSPORT INFORMATION
DOT, IATA, ICAO, IMO description:
Proper Shipping Name:
Hazard Class:
Identification Number:
Packaging Group (PG)
Label Requirements:
Unit Container :
Packaging:
Reportable Quantity (RQ):
ERG Guide #
15.
Sodium Hydroxide Solution
8
UN 1824
II
8 - Corrosive
1, 4, 8, 20, 60 Liter Polyethylene Container
Meets Performance Oriented Packaging requirements.
>18,000 liters
154
REGULATORY INFORMATION
U.S. FEDERAL REGULATIONS:
1. Supplier Notification about toxic Chemicals.
AUTOMATED PRODUCTION EQUIPMENT CORPORATION is required to inform
you, that this product contains a toxic chemical or chemicals subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372, if specified annual thresholds are
met or exceeded.
Toxic Chemical
CAS #
Wt.%(Maximum)
None
MSDS
6911-1321 & 6911-3321
Page 5 of 6
Your other suppliers of trade name products or mixtures containing section 313
chemicals must also notify you. If you repackage or otherwise redistribute this
product to industrial customers you are required to furnish similar notification to
them.
2. CERCLA and EPCRA:
Threshold Planning Quantity: Not Applicable
(Release) Reportable Quantity:
>18,000 liters
Extremely Hazardous Substance: None
3. EPCRA Hazard Categories:
Immediate (Acute) Health:
Yes
Delayed (Chronic) Health:
Yes
Fire:
No
Sudden release of Pressure:
No
Reactivity:
No
4. TSCA Statement.
All ingredients of this product are listed under the Toxic Substances Control Act
(TSCA).
5. ODS Certification.
This product does not contain and is not manufactured with Ozone Depleting
Substances (ODS).
6. VOC Certification.
This product does not contain any Volatile Organic Compounds (VOC).
7. PCB Certification.
This product does not contain any polychlorinated biphenyls (PCB).
STATE REGULATIONS:
California Prop. 65:
Not applicable
INTERNATIONAL REGULATIONS:
WHMIS Classification.
Class D2B, Class E
16.
OTHER INFORMATION
The data and information presented herein has been compiled from sources
considered to be dependable, and is accurate and reliable to the best of the
knowledge and belief of AUTOMATED PRODUCTION EQUIPMENT
CORPORATION, but not guaranteed to be so. AUTOMATED PRODUCTION
EQUIPMENT CORPORATION makes no representations or warranties, expressed
or implied, nor assumes legal responsibility. This information is offered solely for
your consideration, investigation and verification. Customers are encouraged to
conduct their own tests.
MSDS
6911-1321 & 6911-3321
Page 6 of 6